Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 3306 : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
Available format(s)

Hardcopy , PDF

Superseded date

25-08-2020

Language(s)

English

Published date

01-04-2019

This specification covers the requirements for ethylene glycol or propylene glycol base engine coolants used in automobiles or other light duty service cooling systems.

1.1This specification covers the requirements for ethylene glycol or propylene glycol base engine coolants used in automobiles or other light duty service cooling systems. When concentrates are used at 40 to 70 % concentration by volume in water, or when prediluted glycol base engine coolants 50 volume % or higher engine coolant concentrate are used without further dilution, they will function effectively to provide protection against freezing, boiling, and corrosion.

1.2The coolants governed by this specification are categorized as follows:

Coolant Type

Description

I

Ethylene glycol base concentrate

II

Propylene glycol base concentrate

V

Ethylene glycol base concentrate
containing glycerin

III

Ethylene glycol predilute 50 volume % or higher engine coolant concentrate

IV

Propylene glycol predilute 50 volume % or higher engine coolant concentrate

VI

Ethylene glycol base predilute
containing glycerin 50 volume % or higher engine coolant concentrate

Note 1:This specification is based on the knowledge of the performance of engine coolants prepared from new or virgin ingredients. This specification shall also apply to engine coolants prepared using glycol generated from recycled or reprocessed used coolant or reprocessed industrial-source glycol, provided that said glycol meets the requirements of Specification E1177. Separate specifications (D6471 and D6472) exist for engine coolants prepared from recycled or reprocessed used coolant or reprocessed industrial-source glycol that does not meet the requirements established in Specification E1177. This specification shall also apply to glycol based engine coolants prepared using fully refined glycerin provided that said glycerin meets the requirements for Specification D7640.

1.3The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

Note 2:This specification applies to glycol base engine coolant for automobiles and light duty service. Specifications D4985 and D6210 exist for heavy duty engine service.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 15
DocumentType
Standard
Pages
7
ProductNote
THIS STANDARD ALSO REFERS TO Federal Method 2540B.
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 1119 : 2005 : R2015 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 7715 : 2012 : R2016 : EDT 1 Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
ASTM D 2570 : 2016 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 4725 : 2015 Standard Terminology for Engine Coolants and Related Fluids
ASTM D 4985 : 2010 : R2015 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 2847 : 2015 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
ASTM D 6210 : 2017 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines<rangeref></rangeref >
ASTM D 6660 : 2001 : R2019 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

ASTM D 1122 : 2016 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2012 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1123 : 1999 : R2009 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 5931 : 1996 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 1122 : 2016 : R2017 : EDT 1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2017 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 3321 : 2019 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 1122 : 2020 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2005 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1122 : 2008 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1287 : 2011 : R2020 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 6210 : 2017 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines<rangeref></rangeref >
ASTM D 1120 : 1994 : R1998 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1384 : 2001 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM E 1177 : 2009 : R2014 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1120 : 2011 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1287 : 1991 : R1997 : EDT 1 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 6471 : 2003 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM D 3634 : 1999 : R2009 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1287 : 2009 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1122 : 1997 : REV A Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 6472 : 2006 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM D 1177 : 1994 : R1998 : EDT 1 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM E 1177 : 2003 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM E 1177 : 2009 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 6210 : 2004 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 6210 : 2008 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 4725 : 2011 Standard Terminology for Engine Coolants
ASTM D 1120 : 1994 : R1998 : EDT 1 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1119 : 2005 : R2015 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1120 : 2008 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 6472 : 2000 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM E 1177 : 2005 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 4340 : 1996 : R2007 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 2570 : 1991 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1122 : 2013 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1123 : 1999 : R2003 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 1287 : 2011 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 3634 : 1999 : R2005 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1121 : 2007 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1882 : 1996 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 5931 : 1996 : R2002 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 2570 : 2016 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 4725 : 1998 Standard Terminology for Engine Coolants
ASTM D 1121 : 2011 : R2020 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1177 : 1994 : R1998 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1882 : 1996 : R2006 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 1121 : 1967 Standard Method Of Test For Reserve Alkalinity Of Engine Antifreezes And Antirusts
ASTM D 2809 : 1994 : R1999 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 4985 : 2003 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 3321 : 2013 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 4327 : 2011 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 5827 : 2009 : EDT 1 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 1384 : 2005 : EDT 1 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 6660 : 2001 : R2014 : EDT 1 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 6130 : 1997 : REV A : R2009 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1123 : 1999 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 6210 : 2010 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 6660 : 2001 : R2007 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 3321 : 1994 : R1998 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 4985 : 2005 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 1119 : 2005 : R2009 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1882 : 1996 : R2001 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 6471 : 2005 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM D 6471 : 1999 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM E 1177 : 2003 : REV A Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 4985 : 2010 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 1123 : 1999 : R2015 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 3634 : 1999 : R2005 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1126 : 2002 Standard Test Method for Hardness in Water
ASTM D 6660 : 2001 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM E 1177 : 2019 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1293 : 1999 Standard Test Methods for pH of Water
ASTM D 1881 : 1997 : R2009 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1881 : 1997 : R2002 : EDT 1 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1120 : 1994 : R2004 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 4327 : 2003 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 6472 : 2003 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM D 1882 : 2017 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 6130 : 2011 : R2018 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 4725 : 2006 Standard Terminology for Engine Coolants
ASTM D 1881 : 2017 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1881 : 1997 : R2002 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1119 : 2005 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1882 : 1996 : R2012 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 2809 : 2009 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 2570 : 2009 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 6210 : 2003 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 1123 : 1959 : R1968 Standard Method Of Test For Water In Concentrated Engine Antifreezes By The Iodine Reagent Method
ASTM D 6210 : 2006 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 4725 : 2015 Standard Terminology for Engine Coolants and Related Fluids
ASTM D 1119 : 2000 Standard Test Method for Percent Ash Content of Engine Coolants and Antirusts
ASTM D 4340 : 1996 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 4985 : 2009 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM E 1177 : 2014 Standard Specification for Engine Coolant Grade Glycol
ASTM D 7640 : 2016 Standard Specification for Engine Coolant Grade Glycerin
ASTM D 1293 : 1999 : R2005 Standard Test Methods for pH of Water
ASTM D 6130 : 1997 : REV A : R2003 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1121 : 2011 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1384 : 1997 : REV A Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1287 : 1991 : R2002 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1384 : 2004 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1126 : 2012 Standard Test Method for Hardness in Water
ASTM D 1121 : 1998 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 2570 : 2008 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1384 : 2005 : R2019 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1293 : 2018 Standard Test Methods for pH of Water
ASTM D 4327 : 2017 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 6210 : 1998 : REV A Standard Specification for Fully-Formulated Ethylene-Glycol-Base Engine Coolant for Heavy-Duty Engines
ASTM D 4327 : 1997 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 1126 : 2002 : R2007 : EDT 1 Standard Test Method for Hardness in Water
ASTM D 1177 : 2016 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 5827 : 1995 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 4340 : 2019 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 4340 : 1996 : R2001 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 6660 : 2001 : R2019 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 1126 : 2017 Standard Test Method for Hardness in Water
ASTM D 4725 : 2004 Standard Terminology for Engine Coolants
ASTM D 2809 : 2009 : R2017 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 3634 : 1999 : R2015 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM E 1177 : 1998 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 6472 : 2005 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM D 1126 : 1996 Standard Test Method for Hardness in Water
ASTM D 2809 : 2004 : EDT 2 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 2809 : 2004 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 6130 : 2011 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1120 : 2017 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 6472 : 2010 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service (Withdrawn 2019)
ASTM D 4725 : 2008 Standard Terminology for Engine Coolants
ASTM D 3321 : 1994 : R2002 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 3321 : 2012 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 1384 : 2005 : R2012 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 7640 : 2011 Standard Specification for Engine Coolant Grade Glycerin
ASTM D 5931 : 1996 : R2007 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 5827 : 2009 : R2015 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 1120 : 2016 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 2809 : 2004 : EDT 1 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 1293 : 2012 Standard Test Methods for pH of Water
ASTM D 1122 : 1997 : REV A : R2002 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 4725 : 2008 : REV A Standard Terminology for Engine Coolants
ASTM D 4985 : 2000 : REV A Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 1120 : 2011 : EDT 1 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1384 : 2005 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1881 : 1997 : R2002 : EDT 2 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 2570 : 1996 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 5827 : 2009 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 4340 : 2010 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 6471 : 2006 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM D 1881 : 1997 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 2570 : 2010 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1177 : 2007 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 3634 : 1999 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 6210 : 2003 : EDT 1 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 1293 : 1984 : R1990 Standard Test Methods for pH of Water
ASTM D 6471 : 2010 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service (Withdrawn 2019)
ASTM E 1177 : 2006 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 4725 : 2013 Standard Terminology for Engine Coolants and Related Fluids
ASTM D 4985 : 2010 : R2015 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 5931 : 2013 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 3321 : 1994 : R2007 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 6130 : 1997 : REV A Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

View more information
$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more