ASTM D 3597 : 2002 : R2018 : EDT 1
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2019
This performance specification covers the performance requirements for plain, tufted, or flocked woven upholstery fabrics as used in the manufacture of new indoor furniture.
1.1This performance specification covers the performance requirements for plain, tufted, or flocked woven upholstery fabrics as used in the manufacture of new indoor furniture. These requirements apply to both the warp and filling directions for those factors where each fabric direction is pertinent.
1.2This performance specification is not applicable to fabrics used in porch, deck, or lawn furniture; nor for knitted fabrics, bonded or laminated fabrics, or surface-coated fabrics (such as vinyls and urethanes).
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 13
|
| DevelopmentNote |
Supersedes CCC C 00540 (09/2003)
|
| DocumentType |
Standard
|
| Pages |
4
|
| ProductNote |
ε1 NOTE—Editorial changes were made throughout in December 2018
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM D 4852 : 2018 | Standard Practice for Evaluation of Attached Upholstery Fabrics |
| ASTM D 7023 : 2006 : R2012 | Standard Terminology Relating to Home Furnishings |
| AA-O-001091 Revision C Interim Revision:1990 | OFFICE FURNITURE: SOFA, CHAIR, EASY, EXECUTIVE, TRADITIONAL |
| ASTM D 7023 : 2006 : R2018 | Standard Terminology Relating to Home Furnishings |
| ASTM D 7023 : 2006 : EDT 1 | Standard Terminology Relating to Home Furnishings |
| AA-C-001771 Revision C Interim Revision:1979 | CHAIRS, DOUBLE SHELL, MOLDED PLASTIC, ROTARY, UPHOLSTERED |
| AA-C-275 Revision F:1993 | CHAIRS, ROTARY AND STRAIGHT, (ALUMINUM, OFFICE) |
| ASTM D 4033 : 1992 | Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Upholstery Fabrics (Dynamic Fatigue Method) (Withdrawn 2001) |
| ASTM D 7023 : 2006 | Standard Terminology Relating to Home Furnishings |
| AATCCTM107:2013e2:2019 | COLORFASTNESS TO WATER |
| ASTM D 1424 : 1996 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| AATCC TM23:2015e | COLORFASTNESS TO BURNT GAS FUMES |
| ASTM D 4157 : 2013 : R2017 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM D 5034 : 2009 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 1424 : 2009 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| ASTM D 1424 : 2009 : R2013 : EDT 1 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
| ASTM D 4157 : 2013 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| AATCC EP 1 : 2012 | GRAY SCALE FOR COLOR CHANGE |
| ASTM D 2262 : 1983 | Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Traverse Tensile Testing Machine) (Withdrawn 1995) |
| ASTM D 5034 : 2009 : R2013 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 1424 : 2009 : R2013 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
| ASTM D 5034 : 1995 : R2001 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
| ASTM D 4157 : 2007 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM D 4157 : 2010 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM D 1424 : 2021 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
| AATCC TM 116 : 2013 | COLORFASTNESS TO CROCKING: ROTARY VERTICAL CROCKMETER METHOD |
| ASTM D 5034 : 2008 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| CFR 16(PTS0-149) : JAN 96 | COMMERCIAL PRACTICES |
| AATCC TM8-2016e(2022)e | COLORFASTNESS TO CROCKING: CROCKMETER METHOD |
| ASTM D 1424 : 2007 : REV A | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| ASTM D 5034 : 2009 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 1424 : 2007 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| ASTM D 5034 : 2021 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
| AATCC TM 16 : 2004 | COLORFASTNESS TO LIGHT |
| ASTM D 434 : 1995 | Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam (Withdrawn 2004) |
| AATCC EP 8 : 2010 | 9-STEP CHROMATIC TRANSFERENCE SCALE |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 5034 : 1995 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 4157 : 2013 : R2022 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM D 4157 : 2002 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM D 1424 : 2009 : R2019 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.