Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

Available format(s)

PDF

Language(s)

English

Published date

20-05-2016

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 08.02, 2016 Defines measurement of the rheological properties of polymeric materials at various temperatures and shear rates common to processing equipment.

1.1This test method covers measurement of the rheological properties of polymeric materials at various temperatures and shear rates common to processing equipment. It covers measurement of melt viscosity, sensitivity, or stability of melt viscosity with respect to temperature and polymer dwell time in the rheometer, die swell ratio (polymer memory), and shear sensitivity when extruding under constant rate or stress. The techniques described permit the characterization of materials that exhibit both stable and unstable melt viscosity properties.

1.2This test method has been found useful for quality control tests on both reinforced and unreinforced thermoplastics, cure cycles of thermosetting materials, and other polymeric materials having a wide range of melt viscosities.

1.3The values stated in SI units are to be regarded as standard. The inch-pound units given in parentheses are for information only.

Note 1:Although this test method and ISO 11443–1995, “Plastic—Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers” differ in approach or detail, the data obtained using ISO 11443, Method A is technically equivalent to this test method

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	D 20
DevelopmentNote	Supersedes ASTM D 1703. (02/2002)
DocumentType	Redline
Pages	14
PublisherName	American Society for Testing and Materials
Status	Current

IES RP 27.3:2017	Recommended Practice for Photobiological Safety for Lamps – Risk Group Classification and Labeling
ASTM F 942 : 2002	Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM D 5575 : 2007	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM D 3364 : 1999	Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D 5592 : 1994	Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM D 3364 : 1999 : R2011	Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D 5575 : 2007 : R2013	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
(INACTIVE RECORD)ASTM D 5336 : 2015-04	CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS
ASTM D 4067 : 2016 : REDLINE	Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM D 5422 : 2017 : REDLINE	Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D 5099 : 2008 : R2017	Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM F 561 : 2013	Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
BS 7008-2:1988	Acquisition and presentation of comparable data for basic properties of plastics Method for multipoint data
ASTM F 942 : 2002 : R2013	Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM D 3222 : 2005 : R2015	Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM F 451 : 2016	Standard Specification for Acrylic Bone Cement
ASTM D 3364 : 1999 : R2004	Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D 5099 : 2008	Standard Test Methods for Rubber<span class='unicode'>—</span>Measurement of Processing Properties Using Capillary Rheometry
ASTM D 3222 : 2005	Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM D 5099 : 2008 : R2013	Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM F 942 : 2002 : R2008	Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM D 3222 : 2005 : R2010	Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM D 5592 : 1994 : R2010	Standard Guide for Material Properties Needed in Engineering Design Using Plastics
GOST 849:2018	Primary nickel. SpecificationsE
ASTM D 5138 : 2016 : REDLINE	Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
ASTM D 8033 : 2016	Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
ASTM D 5592 : 1994 : R2002 : EDT 1	Standard Guide for Material Properties Needed in Engineering Design Using Plastics

ASTM D 618 : 2013 : REDLINE	Standard Practice for Conditioning Plastics for Testing
ASTM D 1238 : 2013 : REDLINE	Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)

View more information

$135.86

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

ASTM D 3835 : 2016 : REDLINE

Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

Abstract

Scope

General Product Information

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory