ASTM D 4122 : 2017 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Carbon Black—Evaluation of an Industry Reference Black
Available format(s)
Hardcopy , PDF
Superseded date
13-06-2023
Language(s)
English
Published date
06-06-2017
1.1This practice covers guidelines for the production and testing for uniformity of a lot of carbon black to be used as an Industry Reference Black (IRB).
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 24
|
| DocumentType |
Standard Practice
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 8466 : 2022 | Standard Guide for Recovered Carbon Black—Carbon Black Test Methods for Testing rCB |
| ASTM D 1509 : 1995 : R2012 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 3191 : 2002 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene-Rubber)-Recipe and Evaluation Procedures |
| ASTM D 3493 : 2001 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
| ASTM D 3182 : 2015 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 5230 : 2005 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 2414 : 2008 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 3493 : 2009 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 3493 : 2006 : EDT 1 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2008 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 3191 : 2010 : R2014 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
| ASTM D 5230 : 2019 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 5230 : 2003 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3192 : 2009 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 3493 : 2006 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1513 : 2004 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 3265 : 2011 | Standard Test Method for Carbon Black-Tint Strength |
| ASTM D 3493 : 2004 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1508 : 2002 : R2007 : EDT 1 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 2414 : 2022 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 2414 : 2000 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number |
| ASTM D 1510 : 2007 | Standard Test Method for Carbon Black-Iodine Adsorption Number |
| ASTM D 3493 : 2020 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 3182 : 2007 : R2012 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1510 : 2019 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3493 : 2021 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1618 : 2018 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 2414 : 2003 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3192 : 2005 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1508 : 2023 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 2414 : 2016 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1514 : 2004 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1510 : 2008 : REV B | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 6556 : 2009 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 3265 : 2017 : EDT 1 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2006 : REV A | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
| ASTM D 1510 : 2019 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 6556 : 2007 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 3493 : 2003 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
| ASTM D 2414 : 2013 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1508 : 2002 : EDT 1 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1510 : 2011 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1509 : 2018 : R2023 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 6556 : 2002 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 2414 : 2023 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3191 : 2009 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
| ASTM D 1508 : 2002 : R2007 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 3265 : 2015 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1510 : 2008 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1510 : 2016 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3182 : 1989 : R2006 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 6556 : 2003 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 2414 : 2011 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 3265 : 2023 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1510 : 2003 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3493 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2005 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 5230 : 2014 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3493 : 2007 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 3192 : 2000 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 3493 : 2014 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1513 : 2005 : EDT 1 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 3265 : 2015 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2005 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 5230 : 2000 | Standard Test Method for Carbon Black-Automated Individual Pellet Hardness |
| ASTM D 3265 : 2003 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 5230 : 2012 : REV A | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1618 : 1999 : R2004 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 1510 : 2017 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3191 : 2009 : EDT 1 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
| ASTM D 6556 : 2019 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1618 : 1999 : R2011 | Standard Test Method for Carbon Black Extractables<char: emdash>Transmittance of Toluene Extract |
| ASTM D 3182 : 1989 : R2001 : EDT 1 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 412 : 2016 : EDT 1 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 1506 : 1999 : R2013 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 3493 : 2000 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
| ASTM D 2414 : 2012 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3265 : 2006 | Standard Test Method for Carbon Black-Tint Strength |
| ASTM D 2414 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1508 : 2012 : R2017 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1514 : 2004 : R2011 | Standard Test Method for Carbon Black<char: emdash>Sieve Residue |
| ASTM D 5230 : 2010 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3265 : 2013 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 5230 : 2009 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 5230 : 2014 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3265 : 2005 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1513 : 2005 : R2012 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 1509 : 2015 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 1510 : 2005 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3265 : 2019 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 3265 : 2007 | Standard Test Method for Carbon Black-Tint Strength |
| ASTM D 1510 : 2013 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 5230 : 2021 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1509 : 1995 : R2000 | Standard Test Methods for Carbon Black-Heating Loss |
| ASTM D 1514 : 2001 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 3493 : 2016 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2002 | Standard Test Method for Carbon Black—Oil Absorption Number |
| ASTM D 2414 : 2016 : EDT 1 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3493 : 2018 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 6556 : 2002 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1508 : 1999 | Standard Test Method for Carbon Black, Pelleted-Fines and Attrition |
| ASTM D 1508 : 2002 : EDT 2 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1508 : 2012 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 6556 : 2017 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1510 : 1999 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 5230 : 2004 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1506 : 2015 : R2020 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 3191 : 2010 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
| ASTM D 1514 : 2015 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1508 : 2001 | Standard Test Method for Carbon Black, Pelleted-Fines and Attrition |
| ASTM D 1513 : 2005 : EDT 2 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 2414 : 2009 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 1510 : 2009 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1510 : 2012 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 1513 : 1999 : REV A : EDT 1 | Standard Test Method for Carbon Black, Pelleted-Pour Density |
| ASTM D 3493 : 2004 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2006 | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
| ASTM D 3265 : 2017 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1510 : 2008 : REV C | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 3182 : 2007 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1510 : 2007 : REV A | Standard Test Method for Carbon Black-Iodine Adsorption Number |
| ASTM D 3265 : 2019 : REV B | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 2414 : 2017 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3191 : 2006 : EDT 1 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
| ASTM D 1514 : 2023 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1618 : 1999 | Standard Test Method for Carbon Black Extractables-Transmittance of Toluene Extract |
| ASTM D 1510 : 2021 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3265 : 2013 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 3265 : 2021 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2014 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 5230 : 2004 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3191 : 2006 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)-Recipe and Evaluation Procedures |
| ASTM D 2414 : 2006 : REV A : EDT 1 | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
| ASTM D 6556 : 2001 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 6556 : 2000 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 2414 : 2002 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number |
| ASTM D 6556 : 2014 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 5230 : 2012 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 6556 : 2001 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1510 : 2006 : REV A | Standard Test Method for Carbon Black-Iodine Adsorption Number |
| ASTM D 2414 : 2001 | Standard Test Method for Carbon Black—Oil Absorption Number |
| ASTM D 1510 : 2002 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 1618 : 2017 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 1509 : 2018 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 3493 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1510 : 2006 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3493 : 2019 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 3493 : 2013 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2004 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3265 : 2002 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1510 : 2016 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3191 : 2000 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene-Rubber)-Recipe and Evaluation Procedures |
| ASTM D 6556 : 2019 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1510 : 2005 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 6556 : 2021 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1510 : 2010 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 5230 : 2000 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3182 : 1989 : R2001 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1513 : 2005 : R2017 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 6556 : 2004 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 1510 : 2001 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3182 : 2021 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 3192 : 2002 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1510 : 2002 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 1513 : 2005 : R2023 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 1514 : 2015 : R2020 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 5230 : 2000 : EDT 2 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 5230 : 2013 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3182 : 1989 : R1994 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2414 : 2018 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1513 : 1999 : REV A : R2004 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 2414 : 2021 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 6556 : 2016 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1510 : 2009 : REV B | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 3182 : 2016 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1506 : 2023 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 1506 : 1999 : R2007 | Standard Test Methods for Carbon Black-Ash Content |
| ASTM D 3192 : 2009 : R2014 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1514 : 2000 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1506 : 1999 | Standard Test Methods for Carbon Black-Ash Content |
| ASTM D 3265 : 2019 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 3265 : 2001 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 3182 : 2021 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1510 : 2011 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1510 : 2008 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 3192 : 2009 : R2019 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1506 : 2015 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 1510 : 2009 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 2414 : 2009 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 3265 : 2014 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 3265 : 2000 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2013 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3191 : 2010 : R2020 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
| ASTM D 1509 : 1995 : R2007 | Standard Test Methods for Carbon Black-Heating Loss |
| ASTM D 1510 : 2001 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3265 : 2017 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1513 : 2005 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 6556 : 2010 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 5230 : 2009 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3182 : 2015 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
$122.77
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.