Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-03-2020

Publisher

American Society for Testing and Materials

1.1This test method covers the determination of black polyethylene compounds containing channel or furnace black. It is not applicable to thermal black.

1.2This test method is not suitable for plastics that char on pyrolysis.

1.3The values stated in SI units are to be regarded as the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.

Note 1:There is no known ISO equivalent to this standard.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 20
DocumentType	Test Method
Pages	4
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 4218 : 2015

ASTM F 3034 : 2015	Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1	Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM D 2737 : 2012 : REV A	Standard Specification for Polyethylene (PE) Plastic Tubing
ASTM D 3350 : 2014	Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM F 2763 : 2016	Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 2905/F2905M : 2020	Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
ASTM F 2881/F2881M : 2019	Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2807 : 2013 : R2018	Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
ASTM F 2306/F2306M : 2019	Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM D 2239 : 2012 : REV A	Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
ASTM F 2764/F2764M : 2019	Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
ASTM F 2619/F2619M : 2019	Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F 2947/F2947M : 2019	Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 3123 : 2018 : REV A	Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
ASTM F 2968/F2968M : 2014 : REV A	Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications

ASTM D 883 : 2023	Standard Terminology Relating to Plastics
ASTM E 456 : 2002	Standard Terminology for Relating to Quality and Statistics
ASTM D 883 : 2024	Standard Terminology Relating to Plastics
ASTM E 456 : 2013 : REV A : R2022	Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2022 : EDT 1	Standard Terminology Relating to Quality and Statistics
ASTM D 883 : 2022	Standard Terminology Relating to Plastics
ASTM D 883 : 2020 : REV B	Standard Terminology Relating to Plastics
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 456 : 2013 : REV A : R2017 : EDT 5	Standard Terminology Relating to Quality and Statistics
ASTM E 691 : 2019 : EDT 1	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2020	Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
ASTM E 691 : 2022	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2009	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2020 : EDT 1	Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
ASTM E 691 : 2021	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2021	Standard Practice for Evaluating Equivalence of Two Testing Processes
ASTM E 456 : 2013 : REV A : R2017 : EDT 4	Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2017 : EDT 6	Standard Terminology Relating to Quality and Statistics