Name: ASTM D 4552/D4552M : 2010 : R2016 : EDT 1
Brand: ASTM
Price: 108.03 AUD

ASTM D 4552/D4552M : 2010 : R2016 : EDT 1

Superseded

View Superseded by

Standard Practice for Classifying Hot-Mix Recycling Agents

Available format(s)

Hardcopy , PDF

Superseded date

14-08-2020

Language(s)

English

Published date

01-12-2016

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 04.03, 2016 Defines a standardized method whereby petroleum product additives to be used in hot recycling of asphalt concrete can be identified.

1.1This practice covers a standardized method whereby petroleum product additives to be used in hot recycling of asphalt concrete can be identified. The products are classified by viscosity in mm²/s measured at 60 °C [140 °F]. This practice does not apply to emulsified materials.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	D 04
DevelopmentNote	Supersedes ASTM D 4552. (08/2010)
DocumentType	Standard Practice
Pages	2
ProductNote	Reconfirmed EDT 1
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 4552/D4552M : 2020
Supersedes	ASTM D 4552/D4552M : 2010

ASTM D 1298 : 2012 : REV A	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2872 : 2019	Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D 2007 : 2003 : R2008	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 3381 : 2005	Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
ASTM D 1298 : 2012 : REV B	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2007 : 2003 : EDT 1	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 2007 : 2019	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 1298 : 1999 : R2005	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1298 : 2012 : REV B : R2017	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1298 : 2012	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2170 : 2001 : REV A : R2006	Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
ASTM D 2007 : 2011	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 2170 : 1995	Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
ASTM D 1298 : 1999 : EDT 2	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2007 : 2002	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM D 1298 : 1999	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2007 : 2001 : REV A	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM D 1754 : 1997	Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
ASTM D 2170 : 2007	Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
ASTM D 2872 : 2012 : EDT 1	Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D 2170 : 2001 : REV A	Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
ASTM D 2007 : 2011 : R2016	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 1298 : 1999 : EDT 1	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2872 : 2012	Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D 3381 : 2009	Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
ASTM D 2171 : 2007 : EDT 1	Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D 2171 : 1994	Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D 2007 : 2003	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 2872 : 1997	Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D 2171 : 2001	Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D 2872 : 2004	Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D 1298 : 1985 : R1990 : EDT 1	Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2007 : 2001	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM D 2171 : 2007	Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D 3381 : 1992 : R1999	Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
ASTM D 2170 : 2001	Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
ASTM D 2007 : 1998	Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method