Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Withdrawn 2022)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

17-07-2018

Publisher

American Society for Testing and Materials

1.1This test method² evaluates the ability of lubricants to minimize piston and bore scuffing in two-stroke-cycle spark-ignition gasoline engines.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	D 02
DocumentType	Test Method
Pages	10
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 4863 : 2010

ASTM D 4857 : 2012	Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards (Withdrawn 2021)
ASTM D 6618 : 2016	Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
ASTM D 6923 : 2018	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
ASTM D 4859 : 2013	Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC (Withdrawn 2022)
ASTM D 4858 : 2013	Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines (Withdrawn 2022)

ASTM D 2896 : 1998	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2896 : 2005	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 4857 : 2001 : REV A	Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM D 4857 : 2001	Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM D 2700 : 2009	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2018 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2011 : EDT 1	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2007 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2013 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2885 : 2019	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 2700 : 2014	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2270 : 2010	Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100&#176C
ASTM D 2700 : 2009 : EDT 1	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2015	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2700 : 2007 : REV B	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2003	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 4858 : 2000	Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
ASTM D 6593 : 2017	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2013	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2007 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2700 : 2013 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2010	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2003 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 1992	Standard Test Method for Knock Characteristics of Motor and Aviation Fuels by the Motor Method
ASTM D 2885 : 2008	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 6593 : 2015 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 439 : 1989	Specification for Automotive Gasoline (Withdrawn 1990)
ASTM D 2896 : 2007 : REV A	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2885 : 2010 : REV A	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 2700 : 2012	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2006 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM E 178 : 2016 : REV A	Standard Practice for Dealing With Outlying Observations
ASTM D 2700 : 2012 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2885 : 2010	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 2896 : 2011	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2700 : 1999	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2017	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2016	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2001	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2270 : 2004	Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100&#176C
ASTM D 2700 : 2006	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 445 : 1988	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
ASTM D 6593 : 2007	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2010	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM E 178 : 2021	Standard Practice for Dealing With Outlying Observations
ASTM D 6593 : 2002	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM E 178 : 2000	Standard Practice for Dealing With Outlying Observations
ASTM D 2700 : 2013	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2896 : 2001 : EDT 1	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2700 : 2018	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2270 : 2010 : EDT 1	Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100&#176C
ASTM D 664 : 1995	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D 6593 : 2000	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2700 : 2016 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2003 : REV B	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2003 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 4857 : 2012	Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards (Withdrawn 2021)
ASTM D 4857 : 2000	Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM E 178 : 1994	Standard Practice for Dealing With Outlying Observations
ASTM D 2885 : 2019 : REV B	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 2896 : 2001	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2700 : 2011	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 4858 : 2013	Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines (Withdrawn 2022)
ASTM D 445 : 2019 : REV A	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2270 : 2010 : R2016	Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
ASTM D 2700 : 2021	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2002	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2896 : 2003	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 6593 : 2006	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2700 : 2007	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2014 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2002 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2700 : 2004	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2896 : 2006	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2885 : 2013	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 2700 : 2019 : EDT 1	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2008	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2700 : 2013 : REV B	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2004 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2001	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2004	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2013 : REV B	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 4857 : 2002	Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM D 445 : 2001	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D 6593 : 2016 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2885 : 2020	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 445 : 2021	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2896 : 2015	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2270 : 1993 : R1998	Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100&#176C
ASTM D 4858 : 2002	Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
ASTM D 4858 : 2008	Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
ASTM D 4857 : 2003	Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM D 6593 : 2009 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2896 : 2007	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2700 : 2017 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2016	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2700 : 2003	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 4857 : 2008	Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM D 2885 : 2003	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 2700 : 2004 : EDT 1	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 445 : 2021 : EDT 1	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2700 : 2001 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2885 : 2009	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 2885 : 2021	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 6593 : 2009	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2885 : 1995 : R1999	Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM D 2885 : 2019 : REV A	Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 2896 : 2021	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2700 : 2019	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6593 : 2014	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2005	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 6593 : 2005 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2700 : 2004 : REV A	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 2700 : 2008	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 439 : 1985 : REV A	Standard Specification for Automotive Gasoline