ASTM D 4896 : 2001 : R2016
Current
Current
The latest, up-to-date edition.
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-05-2016
CONTAINED IN VOL. 15.06, 2016 Describes the safe and appropriate use of strength values obtained from test methods using single-lap adhesive joint specimens.
1.1This guide is directed toward the safe and appropriate use of strength values obtained from test methods using single-lap adhesive joint specimens.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3The discussion focuses on shear strength as measured with small thin-adherend, single-lap specimens. Many factors, however, apply to shear modulus, tensile strength, and tensile modulus measured by small laboratory specimens in general. This discussion is limited to single-lap specimens and shear strength only for simplification.
| Committee |
D 14
|
| DocumentType |
Guide
|
| Pages |
6
|
| ProductNote |
Reconfirmed 2016
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM D 3163 : 2001 : R2014 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D 1002 : 2010 : R2019 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D 2557 : 1998 : R2017 | Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F) |
| ASTM D 5868 : 2001 : R2014 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 3165 : 2007 : R2014 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
| ASTM D 5574 : 1994 : R2012 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
| ASTM D 5656 : 2010 : R2017 | Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading |
| ASTM D 3164 : 2003 : R2017 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D 7616/D7616M : 2011 : R2017 | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
| ASTM D 4027 : 1998 : R2004 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 3164 : 1997 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D 2295 : 1996 : R2002 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM D 3632 : 1998 : R2011 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D 3165 : 2007 : R2023 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
| ASTM D 3166 :1999 | Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
| ASTM D 1151 : 2000 : R2013 | Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D 4027 : 1998 : R2019 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 4027 : 1998 : R2011 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 1002 : 1999 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D 2294 : 1996 : R2008 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| ASTM D 3166 : 1999 : R2005 | Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
| ASTM D 3163 : 2001 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D 1144 : 1999 : R2021 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| ASTM D 2294 : 1996 : R2016 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| ASTM D 1780 : 1999 | Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives |
| ASTM D 2339 : 1998 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 3164 : 2003 : R2011 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D 1151 : 2000 : R2022 | Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D 2295 : 1996 : R2016 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM D 2339 : 1998 : R2017 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 3528 : 1996 : R2002 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 3163 : 2001 : R2023 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D 1780 : 2005 : R2012 | Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives |
| ASTM D 3528 : 1996 : R2016 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 1002 : 2010 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D 1144 : 1999 : R2011 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| ASTM D 907 : 2015 | Standard Terminology of Adhesives |
| ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 1183 : 2003 : R2019 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM D 1151 : 2000 | Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D 3632 : 1998 : R2004 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D 3983 : 1998 : R2011 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 1144 : 1999 : R2016 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| ASTM D 2919 : 2000 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 3983 : 1998 : R2019 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 3434 : 2000 : R2018 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D 3434 : 2000 : R2013 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D 2919 : 2001 : R2023 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 1002 : 2005 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D 4562 : 2001 : R2013 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 2295 : 1996 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM D 1183 : 1996 : EDT 1 | Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM D 2919 : 2001 : R2014 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 3983 : 1998 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 2295 : 1996 : R2008 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM D 2339 : 1998 : R2004 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 3166 : 1999 : R2012 | Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
| ASTM D 907 : 2015 : R2023 | Standard Terminology of Adhesives |
| ASTM D 3632 : 1998 : R2019 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D 5868 : 2001 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 1002 : 2010 : R2019 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D 3166 : 1999 : R2020 | Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
| ASTM D 3164 : 2003 : R2017 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D 3434 : 2000 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D 4562 : 2001 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 1183 : 2003 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3164 : 2003 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3163 : 2001 : R2008 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
| ASTM D 5868 : 2001 : R2023 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 3165 : 2000 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
| ASTM D 5868 : 2001 : R2014 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM E 229 : 1997 | Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003) |
| ASTM D 1151 : 2000 : R2006 | Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D 1144 : 1999 : R2005 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| ASTM D 2294 : 1996 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| ASTM D 1002 : 2001 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D 5868 : 2001 : R2008 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3528 : 1996 : R2008 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 2294 : 1996 : R2002 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| ASTM D 3434 : 2000 : R2006 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D 2919 : 2001 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 3632 : 1998 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D 1183 : 2003 : R2011 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM D 4562 : 2001 : R2019 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 3983 : 1998 : R2004 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 1780 : 2005 | Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives |
| ASTM D 3165 : 2007 : R2014 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
| ASTM D 4562 : 1990 : R1995 : EDT 1 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 4562 : 2001 : R2007 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3163 : 1996 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D 2339 : 1998 : R2011 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 3528 : 1996 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 2919 : 2001 : EDT 1 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 5868 : 1995 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 4027 : 1998 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 2919 : 2001 : R2007 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 3165 : 2007 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
| ASTM D 1144:1999 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| ASTM D 3163 : 2001 : R2014 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
$103.13
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.