Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-07-2018

Publisher

American Society for Testing and Materials

1.1These test methods cover procedures for sampling and testing prefabricated, reinforced, polymer-modified bituminous sheet materials designed for single- or multiple-ply application in roofing and waterproofing membranes. These products may use various surfacing materials on one side.1.2These test methods cover a number of different products. Not all tests are required for every product. Only those called out in the Product Standard are required.1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

1.2These test methods cover a number of different products. Not all tests are required for every product. Only those called out in the Product Standard are required.

1.3These test methods appear in the following order:

	Section

Sampling	4
Conditioning	5
Thickness	6
Load Strain Properties	7
Tear Strength	8
Moisture Content	9
Water Absorption	10
Dimensional Stability	11
Low-Temperature Flexibility	12
Heat Conditioning	13
Accelerated Weathering	14
Granule Embedment	15
Compound Stability	16
Coating Thickness	17
Low Temperature Unrolling	18
Precision and Bias	19

1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 08
DocumentType	Test Method
Pages	8
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 5147/D5147M : 2014

ASTM E 177 : 1990 : REV A : R1996	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D 1204 : 2007	Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 6298/D6298M : 2016 : R2023	Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
ASTM D 6222/D6222M : 2016	Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D 6298/D6298M : 2016	Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
ASTM D 1204 : 2014	Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1	Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM D 6509/D6509M : 2016 : R2023	Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
ASTM D 4073 : 2006 : R2013	Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 5636/D5636M : 1994 : R2017	Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
ASTM D 1204 : 2008	Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 1204 : 2014 : R2020	Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM E 691 : 2019 : EDT 1	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 95 : 2013 : R2018	Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM E 691 : 2023	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 6162/D6162M : 2016	Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM D 4073 : 1994 : R1998 : EDT 1	Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
ASTM D 4073 : 1994 : R2003	Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
ASTM D 5636/D5636M : 1994 : R2022	Standard Test Method for Low-Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
ASTM E 691 : 2022	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2009	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 6222/D6222M : 2016 : R2023	Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D 6163/D6163M : 2021	Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM E 691 : 2021	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 6223/D6223M : 2021	Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM D 1204 : 1994 : EDT 1	Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 5869/D5869M : 2007 : REV A : R2023	Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM D 4073 : 2006	Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
ASTM D 6509/D6509M : 2016	Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
ASTM D 1204 : 2002	Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 6162/D6162M : 2021	Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM D 6223/D6223M : 2016	Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM D 95 : 2023	Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D 6163/D6163M : 2016	Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements