Customer Support: 131 242

i2i Intertek.com
  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Go to AMERICAS site
Dismiss alert
Please enter a keyword to search
Advanced search

ASTM D 5402 : 2019

Current
Current

The latest, up-to-date edition.

Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

13-06-2019

Publisher

American Society for Testing and Materials

This practice describes a solvent rub technique for assessing the solvent resistance of an organic coating that chemically changes during the curing process.

1.1This practice describes a solvent rub technique for assessing the solvent resistance of an organic coating that chemically changes during the curing process. This technique can be used in the laboratory, in the field, or in the fabricating shop. Test Method D4752 is the preferred method for ethyl silicate zinc-rich primers.

1.2This practice does not specify the solvent, number of double rubs, or expected test results.

1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Consult the supplier’s Safety Data Sheet for specific hazard information relating to the solvent used.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 01
DocumentType
Standard Practice
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 5498 : 2012 : REV A : R2018 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
ASTM D 4752 : 2010 : R2015 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM D 7868 : 2013 : R2017 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
ASTM D 3794 : 2018 Standard Guide for Testing Coil Coatings
ASTM D 7270 : 2007 : R2013 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
ASTM A 755/A755M : 2018 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
ASTM D 6577 : 2015 Standard Guide for Testing Industrial Protective Coatings
ASTM D 3276 : 2015 : EDT 1 Standard Guide for Painting Inspectors (Metal Substrates)
SSPC-Paint 39:2015(R2023) Two-Component Aliphatic Polyurea Topcoat, Fast- or Moderate-Drying, Performance-Based

ASTM D 3363 : 2022 Standard Test Method for Film Hardness by Pencil Test
ASTM D 4138 : 2007 : REV A : R2022 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM D 3363 : 2005 : R2011 : EDT 2 Standard Test Method for Film Hardness by Pencil Test (Withdrawn 2020)
ASTM D 4138 : 1994 : R2001 : EDT 1 Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means
ASTM D 4752 : 2010 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM D 3363 : 2000 Standard Test Method for Film Hardness by Pencil Test
ASTM D 7091 : 2022 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 235 : 2022 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
ASTM D 4752 : 2010 : R2015 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM D 4138 : 2007 : REV A : R2013 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM D 3363 : 2005 Standard Test Method for Film Hardness by Pencil Test
ASTM D 3363 : 2020 Standard Test Method for Film Hardness by Pencil Test
ASTM D 4752 : 1998 Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM D 7091 : 2020 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 3363 : 2005 : R2011 : EDT 1 Standard Test Method for Film Hardness by Pencil Test
ASTM D 843 : 1997 Standard Specification for Nitration Grade Xylene
ASTM D 4138 : 1994 : R1999 Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means
ASTM D 7091 : 2013 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 235 : 2002 : R2012 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) (Withdrawn 2021)
ASTM D 7091 : 2021 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 7091 : 2012 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 7091 : 2005 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 3363 : 2005 : R2011 Standard Test Method for Film Hardness by Pencil Test
ASTM D 4138 : 2007 : REV A : R2017 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM D 4138 : 2007 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM D 4752 : 2003 Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM D 4138 : 2007 : REV A Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

View more information
$103.13
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more