ASTM D 5452 : 2012 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
23-10-2020
English
01-06-2012
CONTAINED IN VOL. 05.02, 2015 Defines the gravimetric determination by filtration of particulate contaminant in a sample of aviation turbine fuel delivered to a laboratory.
1.1This test method covers the gravimetric determination by filtration of particulate contaminant in a sample of aviation turbine fuel delivered to a laboratory.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 4.2, 7.3, 7.5, 11.2, and X1.7.2. Before using this standard, refer to supplier's safety labels, material safety data sheets, and technical literature.
| Committee |
D 02
|
| DevelopmentNote |
Supersedes ASTM ES 19 (12/2001)
|
| DocumentType |
Redline
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 91-87/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII |
| ASTM D 8111 : 2017 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine |
| DEFSTAN 91-86/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JSD: AVCAT/FSII |
| ASTM D 4865 : 2009 : R2014 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| MIL-STD-1548 Revision H:2014 | INTO - PLANE SERVICING OF FUELS AT COMMERCIAL AIRPORTS |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| DEFSTAN 91-91/7(2011) : 2011 | TURBINE FUEL, KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| MIL-PRF-7024 Revision F:2012 | CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS |
| MIL-STD-1518 Revision E:2014 | STORAGE, HANDLING, AND SERVICING OF AVIATION FUELS, LUBRICATING OILS, AND HYDRAULIC FLUIDS AT CONTRACTOR FACILITIES |
| ASTM D 2276 : 2006 : R2014 | Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
| MIL-DTL-16884 Revision P:2017 | FUEL, NAVAL DISTILLATE |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| DEFSTAN 91-88/4(2009) : 2009 | TURBINE FUEL, AVIATION: WIDE CUT TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-40 - JSD: AVTAG/FSII |
| ASTM D 7320 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE 3G, SPARK-IGNITION ENGINE |
| MIL-DTL-83133 Revision K:2018 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| MIL-DTL-27686 Revision G:1997 | INHIBITOR, ICING, FUEL SYSTEM |
| MIL-DTL-25524 Revision F:2015 | TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS) |
| DEFSTAN 91-91/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| MIL PRF 38219 : C | TURBINE FUEL, LOW VOLATILITY, JP-7 |
| ASTM D 4865 : 2009 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| MIL PRF 5624 : S | TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST |
| MIL-DTL-87107 Revision E:2012 | Propellant, High Density Synthetic Hydrocarbon Type, Grade JP-10 |
| MIL-DTL-38219 Revision D:1998 | TURBINE FUEL, LOW VOLATILITY, JP-7 |
| MIL-PRF-38299 Revision E:2011 | FLUID, PURGING, FOR PRESERVING FUEL TANKS OF JET AIRCRAFT |
| MIL-DTL-81248 Revision C:2006 | DETECTOR PAD, FREE WATER |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| ASTM D 6468 : 2008 : R2013 | Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
| ASTM D 6986 : 2003 : R2010 | Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures) |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| VV-F-800 Revision E:1987 | FUEL OIL, DIESEL |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| MIL F 16884 : J | FUEL, NAVAL DISTILLATE |
| CSA B836 : 2014 | STORAGE, HANDLING, AND DISPENSING OF AVIATION FUELS AT AERODROMES |
| MIL PRF 16884 : K | FUEL, NAVAL DISTILLATE |
| DEFSTAN 91-91/8(2016) : 2016 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| ASTM D 6986 : 2003 | Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures) |
| MIL-DTL-25576 Revision E:2006 | Propellant, Rocket Grade Kerosene |
| DEFSTAN 91-87/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE: CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-34 JOINT SERVICE DESIGNATION: AVTUR/FSII |
| CSA B836:14 (R2019) | Storage, handling, and dispensing of aviation fuels at aerodromes |
| DEFSTAN 91-091/9(2016) : 2016 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| ASTM D 6984 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE IIIF, SPARK-IGNITION ENGINE |
| ASTM D 6986 : 2003 : R2016 | Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures) |
| ASTM D 1655 : 2018-01 | SPECIFICATION FOR AVIATION TURBINE FUELS |
| ASTM D 6217 : 2011 | Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
| ASTM D 6468 : 2008 | Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
| EI 1535 : 2016 | MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL |
| DEFSTAN 91-88/3(2005) : 2005 | TURBINE FUEL, AVIATION: WIDE CUT TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-40 JOINT SERVICE DESIGNATION: AVTAG/FSII |
| DEFSTAN 91-91/6(2008) : 2008 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| MIL-DTL-46162 Revision E:2002 | FUEL, DIESEL, REFEREE GRADE |
| DEFSTAN 91-86/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
| MIL-DTL-87173 Revision C:2014 | PROPELLANT, PRIMING FLUID ALCM, GRADE PF-1 |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM D 6217 : 2011 : R2016 | Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
| ASTM D 2276 : 2006 | Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.