Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 5456 : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Evaluation of Structural Composite Lumber Products
Available format(s)

Hardcopy , PDF

Superseded date

27-01-2021

Language(s)

English

Published date

29-05-2019

This specification recognizes the complexity of structural glued products.

1.1This specification recognizes the complexity of structural glued products. Consequently, this specification covers both specific procedures and statements of intent that sampling and analysis must relate to the specific product.

1.2This specification was developed in the light of currently manufactured products as defined in 3.2. Materials that do not conform to the definitions are beyond the scope of this specification. A brief discussion is found in Appendix X2.

1.3Details of manufacturing procedures are beyond the scope of this specification.

Note 1:There is some potential for manufacturing variables to affect the properties of members that are loaded for sustained periods of time. Users of this specification are advised to consider the commentary on this topic in Appendix X2.

1.4This specification primarily considers end use in dry service conditions defined in the governing code-referenced design standards, such as in most covered structures. The conditioning environment of 6.3 is considered representative of such uses.

1.5The performance of structural composite lumber is affected by wood species, wood element size and shape, and adhesive and production parameters. Therefore, products produced by each individual manufacturer shall be evaluated to determine their product properties, regardless of the similarity in characteristics to products produced by other manufacturers. Where a manufacturer produces product in more than one facility, each production facility shall be evaluated independently. For additional production facilities, any revisions to the full qualification program in accordance with this specification shall be approved by the independent qualifying agency.

1.6This specification is intended to provide manufacturers, regulatory agencies, and end users with a means to evaluate a composite lumber product intended for use as a structural material.

1.7This specification covers initial qualification sampling, mechanical and physical tests, analysis, and design value assignments. Requirements for a quality-control program and cumulative evaluations are included to ensure maintenance of allowable design values for the product.

1.8This specification, or parts thereof, shall be applicable to structural composite lumber portions of manufactured structural components.

1.9The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.10This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.11This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 07
DocumentType
Standard
Pages
34
ProductNote
THIS STANDARD ALSO REFERS TO CSA Standards for Wood Adhesives O112-M Series, US Product Standard PS 2
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7147 : 2011 : R2018 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
ASTM D 7770 : 2012(R2019) Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
ASTM D 3737 : 2018 : EDT 1 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
ASTM D 5457 : 2020 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 7672 : 2019 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
ASTM D 2395 : 2017 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D 7033 : 2014 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
ASTM D 7031 : 2011 : R2019 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
ASTM D 7469 : 2016 Standard Test Methods for End-Joints in Structural Wood Products
ASTM D 7770 : 2012 Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
ASTM D 2915 : 2017 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM D 7247 : 2017 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 7341 : 2014 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
ASTM D 5457 : 2019 : REV B Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 2559 : 2012 : REV A : R2018 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 5055 : 2019 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

ASTM D 3201 : 2007 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
ASTM D 3201 : 1994 : R2003 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products
ASTM D 5457 : 2004 Standard Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 1666 : 2011 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials
ASTM D 4933 : 2016 Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
ASTM D 2559 : 2009 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 1037 : 2006 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
ASTM D 5055 : 2011 : REV A Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 6815 : 2009 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM D 1761 : 1988 : R2000 Standard Test Methods for Mechanical Fasteners in Wood
ASTM D 3755 : 2020 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D 5764 : 1997 : REV A : R2018 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
ASTM D 2718 : 2018 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D 5055 : 2000 : REV A Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 4933 : 1999 : R2010 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
ASTM D 1037 : 2012 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
ASTM D 4761 : 2013 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 4442 : 2007 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 5055 : 2019 : EDT 1 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 2132 : 2012 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ASTM D 2915 : 2017 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM D 5055 : 2005 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 4300 : 2001 : R2013 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 2718 : 2000 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D 2394 : 2005 Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
ASTM D 4442 : 2015 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 6815 : 2002 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM D 1583 : 2001 : R2018 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D 4761 : 2002 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 5055 : 2010 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 7247 : 2007 : REV A : EDT 1 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures (Withdrawn 2016)
ASTM D 4761 : 2011 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 2559 : 2004 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 5457 : 2019 : REV A Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 4933 : 1999 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
ASTM D 2394 : 2005 : EDT 1 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
ASTM D 1583 : 2000 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D 4933 : 1999 : R2004 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
ASTM D 5055 : 2011 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 5764 : 1997 : REV A Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products
ASTM D 7480 : 2008 Standard Guide for Evaluating the Attributes of a Forest Management Plan
ASTM D 7247 : 2006 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 1666 : 1987 : R2004 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials
ASTM D 4761 : 2018 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM D 1761 : 2012 Standard Test Methods for Mechanical Fasteners in Wood
ASTM D 4300 : 2001 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 4442 : 2016 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 1761 : 1988 : R2000 : EDT 1 Standard Test Methods for Mechanical Fasteners in Wood
ASTM D 5764 : 1997 : REV A : R2013 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
ASTM D 3201 : 2008 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
ASTM D 5457 : 1993 : R1998 Standard Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 2395 : 1993 : R1997 : EDT 1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D 2395 : 2007 : REV A Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D 7247 : 2007 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 1761 : 2006 Standard Test Methods for Mechanical Fasteners in Wood
ASTM D 5457 : 2017 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 3201 : 2008 : REV A Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
ASTM D 1583 : 2001 : R2013 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D 1037 : 1999 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
ASTM D 4761 : 2019 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM D 5457 : 2010 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 5764 : 1997 : REV A : R2002 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products
ASTM D 2395 : 2017 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D 2915 : 2003 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D 4300 : 1998 : REV A Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 5055 : 2019 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 5457 : 2019 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 1666 : 2017 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials
ASTM D 4761 : 2005 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 1583 : 2001 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D 3755 : 1997 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D 7247 : 2007 : REV A Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 3201 : 1994 : R1998 : EDT 1 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products
ASTM D 1583 : 2001 : R2008 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D 1037 : 2006 : REV A Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
ASTM D 5055 : 2013 : EDT 1 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 2559 : 2010 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 4442 : 2020 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 1037 : 1978 Standard Methods of Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials
ASTM D 5457 : 2015 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 2395 : 2014 : EDT 1 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D 2394 : 1983 : R1999 Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
ASTM D 5055 : 2002 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 5055 : 2013 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 2718 : 2000 : R2006 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D 2718 : 2000 : EDT 1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D 2718 : 2000 : R2011 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D 2395 : 2014 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D 1666 : 1987 : R1999 Standard Methods for Conducting Machining Tests of Wood and Wood-Base Materials
ASTM D 2394 : 2005 : R2011 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
ASTM D 5055 : 2008 : REV A Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 2395 : 2006 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D 3201 : 2008 : REV A : EDT 1 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
ASTM D 2132 : 2019 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ASTM D 2559 : 2012 : REV A : EDT 1 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 7480 : 2008 : R2014 Standard Guide for Evaluating the Attributes of a Forest Management Plan
ASTM D 6815 : 2002 : REV A Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM D 5055 : 2003 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 5055 : 2008 : REV A : EDT 1 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 2559 : 2000 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 2132 : 2003 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ASTM D 2559 : 2012 : REV A Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 1761 : 1988 : R1995 : EDT 1 Standard Test Methods for Mechanical Fasteners in Wood
ASTM D 4300 : 2001 : R2008 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 7247 : 2016 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 5055 : 2008 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 3755 : 2014 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D 2395 : 2007 : REV A : EDT 1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D 5457 : 2018 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 2559 : 2003 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 7247 : 2017 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 2718 : 2000 : R2011 : EDT 1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D 5055 : 2016 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 5055 : 2004 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 5457 : 2012 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 2132 : 2011 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ASTM D 4761 : 2002 : REV A Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 2915 : 2010 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM D 2559 : 2012 : REV A : R2018 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 5055 : 2009 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 2132 : 2012 : R2018 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ASTM D 2132 : 1998 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ASTM D 2915 : 1998 : EDT 1 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D 2559 : 2010 : REV A Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 6815 : 2009 : R2015 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM D 5764 : 1997 : REV A : R2007 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
ASTM D 2394 : 2017 Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring
ASTM D 5457 : 2019 : REV B Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 2915 : 2002 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D 5457 : 2004 : REV A Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 2395 : 2002 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D 4442 : 1992 : R1997 : EDT 1 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 4442 : 1984 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 5457 : 2019 : REV C Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
ASTM D 5055 : 2012 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D 4442 : 1992 : R2003 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 5055 : 2007 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

View more information
$176.78
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more