Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 5677 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
Available format(s)

Hardcopy , PDF

Superseded date

19-10-2023

Language(s)

English

Published date

27-03-2017

1.1This specification covers a reinforced plastic pipe and fittings system made from epoxy resin and glass-fiber reinforcement, together with adhesive for joint assembly, intended for service up to 150°F (65.6°C) and 150-psig (1034-kPa) operating pressure and surges up to 275 psig (1896 kPa) in aviation jet turbine fuel lines installed below ground.

1.2The dimensionless designator NPS has been substituted in this specification for such traditional terms as nominal diameter, size, and nominal size.

1.3The values stated in inch-pound units are to be regarded as standard. The values in parentheses are for information only.

1.4The following safety hazards caveat pertains only to the test method portion, Section 9, of this specification:This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1:There is no known ISO equivalent to this standard.

Committee
D 20
DocumentType
Standard
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 3241 : 2008 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1600 : 1999 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 3241 : 2009 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2019 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2005 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 3241 : 2020 : REV C Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3951 : 2010 Standard Practice for Commercial Packaging
ASTM D 2310 : 2001 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D 1655 : 2008 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2020 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2011 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2012 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2001 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1655 : 2006 : REV B Standard Specification for Aviation Turbine Fuels
ASTM F 412 : 2020 : REV A Standard Terminology Relating to Plastic Piping Systems
ASTM F 412 : 2021 Standard Terminology Relating to Plastic Piping Systems
ASTM D 1655 : 2006 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 5685 : 2005 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D 3241 : 2006 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1655 : 2021 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2005 Standard Specification for Aviation Turbine Fuels
ASTM D 3951 : 1998 Standard Practice for Commercial Packaging
ASTM D 1655 : 2017 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2014 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2002 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 5685 : 2001 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D 2310 : 2006 : R2012 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Withdrawn 2017)
ASTM D 1655 : 2014 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2001 Standard Specification for Aviation Turbine Fuels
ASTM D 2412 : 2011 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 3241 : 2014 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2011 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2017 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 2412 : 2002 : R2008 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 1655 : 2020 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2020 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 2310 : 2006 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D 1655 : 2022 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2006 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 883 : 2022 Standard Terminology Relating to Plastics
ASTM D 3241 : 2018 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2022 Standard Specification for Aviation Turbine Fuels
ASTM D 3567 : 1997 : R2006 Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
ASTM D 3241 : 2014 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2015 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2017 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2008 Standard Specification for Aviation Turbine Fuels
ASTM D 2412 : 2010 : REV A Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 1655 : 2002 Standard Specification for Aviation Turbine Fuels
ASTM D 1600 : 2007 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 1655 : 2006 Standard Specification for Aviation Turbine Fuels
ASTM D 1600 : 2013 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 3241 : 2023 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2016 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2010 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3951 : 2015 Standard Practice for Commercial Packaging
ASTM D 1655 : 2000 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2019 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2009 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1600 : 2014 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 3567 : 2017 : R2022 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 3241 : 2015 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1600 : 2008 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 3951 : 2018 Standard Practice for Commercial Packaging
ASTM D 1655 : 2015 Standard Specification for Aviation Turbine Fuels
ASTM D 2412 : 1996 : REV A Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 1655 : 2007 Standard Specification for Aviation Turbine Fuels
ASTM D 1599 : 2014 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 1655 : 2015 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1599 : 2014 : EDT 1 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 1655 : 2021 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2008 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 2412 : 2002 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 3567 : 1997 : R2002 Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 3241 : 2001 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1655 : 2012 : REV A Standard Specification for Aviation Turbine Fuels
ASTM F 1173 : 2001 : R2018 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D 1599 : 2018 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 1655 : 2023 Standard Specification for Aviation Turbine Fuels
ASTM F 1173 : 2001 : R2012 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D 1655 : 2014 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1599 : 1999 : R2011 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 1655 : 1985 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2016 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 1599 : 1999 : EDT 1 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 1655 : 2004 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 2412 : 2021 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 3241 : 2005 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 3241 : 2002 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1600 : 2018 Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)
ASTM D 3241 : 2015 : EDT 2 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2016 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2014 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM F 1173 : 2001 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D 1655 : 2021 Standard Specification for Aviation Turbine Fuels
ASTM F 1173 : 2001 : R2023 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM F 412 : 2023 Standard Terminology Relating to Plastic Piping Systems
ASTM D 381 : 2019 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 1655 : 2021 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2004 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2014 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 381 : 2022 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 1655 : 2016 : REV B Standard Specification for Aviation Turbine Fuels
ASTM F 1173 : 1995 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D 1655 : 2007 : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2019 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2000 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3567 : 1997 Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 1655 : 2013 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV D : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 5685 : 1995 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D 3241 : 2002 : REV A : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 381 : 2012 : R2017 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 3241 : 1998 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 5685 : 2019 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D 1655 : 2006 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2003 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2011 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 5685 : 2002 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D 1655 : 2014 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2003 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2009 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2005 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1599 : 1999 : R2005 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 3241 : 2013 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2011 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2014 : REV B : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2020 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3567 : 2017 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 1655 : 2009 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2020 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 Standard Specification for Aviation Turbine Fuels
ASTM D 5685 : 2011 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D 3241 : 2016 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM F 1173 : 2001 : R2006 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D 2412 : 2011 : R2018 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 3241 : 2012 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 2310 : 1997 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D 1599 : 1999 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 3567 : 1997 : R2011 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 1655 : 2019 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 2412 : 2010 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 1655 : 2013 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2004 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 3241 : 2016 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2011 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

View more information
$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more