Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 6193 : 2016 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Practice for Stitches and Seams
Available format(s)

PDF

Language(s)

English

Published date

01-01-2016

CONTAINED IN VOL. 07.02, 2016 Describes the requirements and characteristics of stitches and seams used in the fabrication of sewn items.

1.1This practice covers the requirements and characteristics of stitches and seams used in the fabrication of sewn items.

1.2This practice identifies the category, formation, and general purpose for stitch types and seam types used in the fabrication of sewn items.

1.3Subsequent to a general discussion of stitches and seams that include schematic indices, this practice is comprised of the following sections that are listed in the order in which they appear:

1.3.1Section 5Classification of Stitch Types for which drawings are shown in Stitch Figs. 1-69,

Note 1:This type of stitching shall be produced by folding the edge of the material in an “S” fold with the raw edge turned under to form a finished edge, and stitching through the two folds with one row of stitches.

1.3.3Annex A1Seam Assembly Recommendations.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 13
DevelopmentNote
Supersedes FED STD 751 (02/2004)
DocumentType
Redline
Pages
143
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

MIL-DTL-44436 Revision B:2012 CLOTH, WIND RESISTANT POPLIN, NYLON/COTTON BLEND
MIL-DTL-31008 Revision A:2004 Jacket, Security Forces, Cold Weather (No S/S Document)
A-A-59369 Base Document:2003 UNDERSHIRT, SILK WEIGHT SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-1
A-A-50194 Revision B:2003 HOOD, BALACLAVA, EXTENDED COLD WEATHER
ASTM F 696 : 2006 Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
ASTM F 696 : 2006 : R2011 Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
ASTM F 1085 : 2014 : REDLINE Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
MIL-DTL-44048 Revision H:2000 COATS, CAMOUFLAGE PATTERN, COMBAT
MIL-DTL-85633 Revision D:2016 COVERALLS, FLYERS, ANTI-EXPOSURE, CWU-74/P, CWU-86/P, AND CWU-87/P
MIL-DTL-32082 Revision A:2012 COVERALLS, MECHANICS, COLD WEATHER
ASTM D 204 : 2002 : R2010 : EDT 1 Standard Test Methods for Sewing Threads
MIL-DTL-11922 Revision F:2016 SCARF, BRANCH OF SERVICE, BIB TYPE
MIL-DTL-32130 Base Document:2003 UNDERWEAR, CHEMICAL PROTECTIVE, TWO PIECE (UNDERSHIRT AND DRAWERS)
A-A-59483 Base Document:2004 OVERALLS, POWERSTRETCH WITH "RAINBOW DROM SEAT" SPEAR SYSTEM: LAYER-3
MIL-DTL-44105 Revision C:2008 HAT, SUN, HOT WEATHER
A-A-55077 Revision A:2000 Bag, Duffel (No S/S Document)
MIL-DTL-32149 Revision A:2007 CLOTH, WATERPROOF, FLAME RESISTANT, MOISTURE VAPOR PERMEABLE
MIL-DTL-32063 Base Document:2000 TARPAULINS, COTTON OR POLYESTER, FWWMR
ASTM E 1549/E1549M : 2013 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
ASTM D 7571 : 2010 : R2014 : EDT 1 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
NFPA 1977 : 2016 PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING
MIL-DTL-29378 Revision B:2008 BELT, MAN'S: CEREMONIAL, OFFICERS (SAM BROWNE)
MIL-DTL-32102 Base Document:2002 JOINT SERVICE LIGHTWEIGHT INTEGRATED SUIT TECHNOLOGY (JSLIST) COAT AND TROUSER, CHEMICAL PROTECTIVE
MIL-DTL-10035 Revision L:2001 TENT, HEXAGONAL, LIGHTWEIGHT, M-1950
DDD-F-416 Revision F:2005 Flag, National, United States of America and Flag, Union Jack
MIL-DTL-83406 Revision C:2006 ANTI-G GARMENT, CUTAWAY, CSU-13B/P
MIL-PRF-32107 Base Document:2002 HOSE, AIR DUCT, GENERAL SPECIFICATION FOR
MIL-DTL-43492 Revision D:2000 TENT SECTIONS, FRAME TYPE, EXPANDABLE
MIL-DTL-12354 Revision G:2000 TENT, ARCTIC, 10 MAN
MIL-DTL-43455 Revision K:2007 COAT, COLD WEATHER, FIELD
JJ-N-180 Revision H:2015 NETS, LAUNDRY
MIL-DTL-43415 Revision D:2003 CAP, SERVICE, MILITARY POLICE, WHITE
MIL-DTL-81905 Revision H:2016 ANTI-G GARMENT, CSU-15A/P
OO-S-256 Revision K:2012 Sewing Machine, Industrial, General Specification for
MIL-DTL-82288 Revision C:2000 TARPAULIN: LAMINATED, VINYL-NYLON OR VINYL-POLYESTER, FLEXIBLE
MIL-DTL-0083406 Revision D Interim Revision:2010 ANTI-G GARMENT, CUTAWAY, CSU-13B/P
MIL-DTL-32160 Base Document:2004 COVER, REVERSIBLE, ADVANCED COMBAT HELMET
MIL-DTL-32147 Base Document:2004 SOCKS, FLYER'S, ANTI-EXPOSURE, RUGGEDIZED
MIL-DTL-43741 Revision C:2007 NECKERCHIEF, COTTON, KNITTED
MIL-DTL-32146 Revision A:2015 WRIST SEAL, FLYER'S, ANTI-EXPOSURE, RUGGEDIZED
ASTM D 204 : 2002 : R2010 Standard Test Methods for Sewing Threads
ASCE/SEI 55 10 : 2010 TENSILE MEMBRANE STRUCTURES
MIL-DTL-32240 Base Document:2007 Submarine Wetbag
MIL-DTL-32182 Base Document:2005 COAT, OPERATIONAL DRESS UNIFORM (COAST GUARD)
A-A-59358 Base Document:2003 UNDERSHIRT, MID WEIGHT, SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-2
MIL-DTL-3372 Revision G:2000 CASE, TENTAGE REPAIR KIT
A-A-59329 Base Document:2003 DRAWERS, SILK WEIGHT SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-1
MIL-DTL-32185 Base Document:2005 TROUSERS, COLD WEATHER, UNIVERSAL CAMOUFLAGE
MIL-DTL-32145 Base Document:2004 Neck Seal, Flyers\', Anti-Exposure, Ruggedized
MIL-DTL-44050 Revision B:2009 CLOTH, BALLISTIC, ARAMID
MIL-DTL-32158 Base Document:2004 TROUSERS, ALL-PURPOSE, ENVIRONMENTAL, CAMOUFLAGE
MIL-DTL-32094 Base Document:2001 GLOVE, AIRCREW, COLD/WET PROTECTIVE, HAU-14/P
MIL-DTL-32184 Base Document:2005 PARKA, COLD WEATHER, UNIVERSAL CAMOUFLAGE
MIL-DTL-484 Revision J:2006 CLOTH, WIND RESISTANT OXFORD, COTTON, WATER REPELLENT TREATED
MIL-DTL-44419 Revision A:2006 GLOVES, MEN'S AND WOMEN'S, INTERMEDIATE COLD/WET
MIL-DTL-85040 Revision D:2004 DRAWERS AND UNDERSHIRTS, FLYERS, ANTI-EXPOSURE, ARAMID, HIGH TEMPERATURE RESISTANT, CWU-43/P AND CWU-44/P
ASTM E 1549/E1549M : 2013 : R2016 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
MIL-DTL-20277-2 Revision A:2014 SHEATH, FOR COMBAT KNIFE
A-A-59892 Revision A:2013 Cover-Cargo-HEMTT-Truck
MIL-DTL-44132 Revision C:2000 VEST, CONDITIONING MICROCLIMATE: AIR
AA-F-00360 Revision B Interim Revision:2002 FILING CABINETS, STEEL, MAP AND PLAN, (SECTIONAL)
MIL-DTL-81543 Revision C:2010 CONTAINER ASSEMBLIES, INFLATABLE LIFE RAFT
MIL-DTL-14645 Revision C:2002 INSIGNIA, RANK AND GRADE, EMBROIDERED SHOULDER MARKS, AIR FORCE AND ARMY, GENERAL SPECIFICATION FOR
MIL-DTL-43342 Revision F:2005 WEBBING ASSEMBLY, GENERAL SPECIFICATION FOR
MIL-DTL-7620 Revision D:2002 PARACHUTES AND COMPONENTS, CARGO, EXTRACTION AND DECELERATION, GENERAL SPECIFICATION FOR
MIL-DTL-83776 Revision B:2001 HELMET, FLYER'S, WINTER
MIL-DTL-43549 Revision D:2000 CAP, COLD WEATHER, INSULATING, HELMET LINER
A-A-59327 Base Document:2003 DRAWERS, MID WEIGHT, SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-2
MIL-DTL-32200 Base Document:2005 COVER, ADVANCED COMBAT HELMET
MIL-DTL-43649 Revision D:2005 PARACHUTES, CARGO, 12,26, AND 34 FOOT DIAMETER
MIL-STD-849 Revision C:2009 INSPECTION REQUIREMENTS, DEFINITIONS AND CLASSIFICATION OF DEFECTS FOR PARACHUTES
MIL-DTL-44400 Revision A:2000 TENT, FABRIC ASSEMBLIES, STANDARDIZED INTEGRATED COMMAND POST SYSTEM
MIL-DTL-20268 Revision H:2017 FRAME, CAP
ASTM D 7571 : 2010 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
ASTM D 1683/D1683M : 2017-04 TEST METHOD FOR FAILURE IN SEWN SEAMS OF WOVEN FABRICS
MIL-DTL-44117 Revision B:2011 Helmet, Combat Vehicle Crewman, Ballistic Shell (DH-132B) (No S/S Document)
MIL-DTL-18186 Revision E:2017 CROWNS, SERVICE AND DRESS CAP
MIL-DTL-32117 Revision A:2004 HELMET COVER, REVERSIBLE, MARPAT[TM] WOODLAND AND DESERT PATTERN CAMOUFLAGE, MARINE CORPS
MIL-DTL-3866 Revision H:2005 Gloves, Cloth, Cotton, Knitted, Lightweight (No S/S Document)
ASTM D 7722 : 2017 : REDLINE Standard Terminology Relating to Industrial Textile Stitches and Seams
MIL-DTL-32157 Base Document:2004 PARKA, ALL-PURPOSE ENVIRONMENTAL, CAMOUFLAGE
SAE AS 7365 : 2013 Duct Assembly, Ground, Conditioned Air, Metallic Reinforced, Low Pressure, 350 °F
ASTM D 204 : 2002 Standard Test Methods for Sewing Threads
MIL-DTL-7567 Revision C:2002 PARACHUTES, PERSONNEL, DETAIL MANUFACTURING INSTRUCTIONS FOR
MIL-DTL-52543 Revision E:2010 LIGHT, MARKER, GROUND-OBSTRUCTION
MIL-DTL-9401 Revision C:2003 CANOPY, PARACHUTE, RING SLOT, GENERAL SPECIFICATION FOR
MIL-DTL-6279 Revision M:2003 PARKA, EXTREME COLD WEATHER, TYPE N-3B
MIL-DTL-85361 Revision A:2010 CARRYING CASE ASSEMBLIES, INFLATABLE LIFE RAFT
MIL-DTL-43695 Revision C:2000 FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE
MIL-DTL-43335 Revision G:2000 LINER, WET WEATHER PONCHO
ASTM D 204 : 2002 : R2016 Standard Test Methods for Sewing Threads

View more information
$248.81
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more