Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 6577 : 2015 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Guide for Testing Industrial Protective Coatings
Available format(s)

PDF

Language(s)

English

Published date

01-12-2015

CONTAINED IN VOL. 06.02, 2017 Explains the selection and use of test methods and procedures for testing industrial protective coatings.

1.1This guide covers the selection and use of test methods and procedures for testing industrial protective coatings. Selection of the standards to be followed must be governed by experience and the requirements in each individual case, together with agreement between the supplier and the user.

1.2This guide covers the testing of liquid coatings as applied on substrate by brushing, rolling, spraying, or other means appropriate to the coating and circumstance.

Note 1:The term “industrial protective coating” as used in this guide is described in the scope of Subcommittee D01.461 as “paints applied to substrates on-site of structures and buildings, especially where subject to corrosive environments, as industrial, urban, and marine environments.”

Note 2:Guides for testing other coating types, such as Guides D4712, D5146, D5324 or for surface preparation, coating application, such as Guide D3276, are available and should be used when it is applicable.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 01
DocumentType
Redline
Pages
12
PublisherName
American Society for Testing and Materials
Status
Current

ASTM D 6943 : 2015 : REDLINE Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings

ASTM D 6695 : 2016 : REDLINE Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 870 : 2015 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ASTM D 5162 : 2015 : REDLINE Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
ASTM D 5178 : 2016 : REDLINE Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 1729 : 2016 : REDLINE Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 823 : 1995 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
ASTM G 8 : 1996 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
ASTM D 3792 : 2016 : REDLINE Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D 2354 : 2010 Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
ASTM G 153 : 2013 : REDLINE Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 6093 : 1997 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D 5895 : 2013 : REDLINE Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM D 609 : 2017 : REDLINE Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM D 660 : 1993 Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM D 4541 : 2017 : REDLINE Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM G 85 : 2011 : REDLINE Standard Practice for Modified Salt Spray (Fog) Testing
ASTM D 6943 : 2015 : REDLINE Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
ASTM D 5324 : 2016 : REDLINE Standard Guide for Testing Water-Borne Architectural Coatings
ASTM D 1200 : 2010 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D 16 : 2016 : REDLINE TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS
ASTM D 1732 : 2003 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
ASTM D 2197 : 2016 : REDLINE Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 610 : 2008 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
NACE TM 01 74 : 2002 LABORATORY METHODS FOR THE EVALUATION OF PROTECTIVE COATINGS AND LINING MATERIALS ON METALLIC SUBSTRATES IN IMMERSION SERVICE
ASTM D 2244 : 2016 : REDLINE Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 661 : 1993 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
ASTM D 2247 : 2015 : REDLINE Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM D 662 : 1993 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
ASTM G 154 : 2016 : REDLINE Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM G 152 : 2013 : REDLINE Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G 62 : 2014 : REDLINE Standard Test Methods for Holiday Detection in Pipeline Coatings
ASTM D 2574 : 2016 : REDLINE Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
ASTM D 562 : 2010 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
ASTM D 3134 : 2015 : REDLINE Standard Practice for Establishing Color and Gloss Tolerances
ASTM D 1735 : 2014 : REDLINE Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ANSI N512 : 1974 PROTECTIVE COATINGS (PAINTS) FOR THE NUCLEAR INDUSTRY
ASTM D 4587 : 2011 : REDLINE Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
ASTM D 5894 : 2016 : REDLINE Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM G 7 : 2005 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
ASTM D 7091 : 2013 : REDLINE Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 4212 : 2016 : REDLINE Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM G 42 : 2011 : REDLINE TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES
ASTM G 155 : 2013 : REDLINE Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM D 2794 : 1993 TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT)
ASTM G 113 : 2016 : REDLINE Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G 147 : 2017 : REDLINE Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM D 7187 : 2015 : REDLINE Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM D 1474 : 1998 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D 1212 : 1991 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 1475 : 2013 : REDLINE Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 522 : 1993 : REV A Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D 6944 : 2015 : REDLINE Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test
ASTM F 1249 : 2013 : REDLINE Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM D 1653 : 2013 : REDLINE Standard Test Methods for Water Vapor Transmission of Organic Coating Films

View more information
$135.86
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more