ASTM D 6660 : 2001 : R2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
18-10-2023
English
15-04-2019
CONTAINED IN VOL. 15.05, 2015 Defines the determination of the freezing point of an aqueous engine coolant solution.
1.1This test method covers the determination of the freezing point of an aqueous engine coolant solution.
1.2This test method is designed to cover ethylene glycol base coolants up to a maximum concentration of 60 % (v/v) in water; however, the ASTM interlaboratory study mentioned in 12.2 has only demonstrated the test method with samples having a concentration range of 40 to 60 % (v/v) water.
Note 1:Where solutions of specific concentrations are to be tested, they shall be prepared from representative samples as directed in Practice D1176. Secondary phases separating on dilution need not be separated.
Note 2:The products may also be marketed in a ready-to-use form (prediluted).
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in 7.3.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 15
|
| DocumentType |
Test Method
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2001
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 7714 : 2011 : R2021 | Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 7518 : 2020 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 4985 : 2010 : R2023 | Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA) |
| ASTM D 7518 : 2010 : R2015 : EDT 1 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 7713 : 2018 | Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal) |
| ASTM D 3306 : 2019 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 8039 : 2016 | Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems |
| ASTM D 4985 : 2010 : R2015 | Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA) |
| ASTM D 7714 : 2011 : R2016 : EDT 1 | Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 1177 : 2012 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1177 : 2017 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1177 : 2005 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 3306 : 2014 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6210 : 2017 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines<rangeref></rangeref > |
| ASTM D 1176 : 2014 : REDLINE | Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
| ASTM D 1177 : 2017 : REDLINE | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1177 : 1994 : R1998 : EDT 1 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 6210 : 2004 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 6210 : 2008 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 1176 : 1998 : R2008 | Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
| ASTM D 3306 : 2003 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 3306 : 2009 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 1176 : 1998 : R2002 | Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
| ASTM D 3306 : 2014-05 | SPECIFICATION FOR GLYCOL BASE ENGINE COOLANT FOR AUTOMOBILE AND LIGHT-DUTY SERVICE |
| ASTM D 1177 : 1994 : R1998 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 3306 : 2021 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6210 : 2010 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 3306 : 2010 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 3306 : 2008 : REV A | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6210 : 2003 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 1176 : 1998 | Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
| ASTM D 6210 : 2006 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 3306 : 2001 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6210 : 1998 : REV A | Standard Specification for Fully-Formulated Ethylene-Glycol-Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 1177 : 2016 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1176 : 2014 : R2019 | Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
| ASTM D 3306 : 2005 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 1176 : 2014 | Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
| ASTM D 3306 : 2019 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 3306 : 2000 : REV A | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 1177 : 2022 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 3306 : 2008 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 1177 : 2007 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 6210 : 2003 : EDT 1 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 3306 : 2011 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.