Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 6792 : 2017 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
Available format(s)

PDF

Superseded date

05-12-2020

Language(s)

English

Published date

01-05-2017

CONTAINED IN VOL. 05.03, 2018 Defines the establishment and maintenance of the essentials of a quality system in laboratories engaged in the analysis of petroleum products and lubricants.

1.1This practice covers the establishment and maintenance of the essentials of a quality management system in laboratories engaged in the analysis of petroleum products, liquid fuels, and lubricants. It is designed to be used in conjunction with Practice D6299.

Note 1:This practice is based on the quality management concepts and principles advocated in ANSI/ISO/ASQ Q9000 standards, ISO/IEC 17025, ASQ Manual,2 and ASTM standards such as D3244, D4182, D4621, D6299, D6300, D7372, E29, E177, E456, E548, E882, E994, E1301, E1323, STP 15D,3 and STP 1209.4

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DevelopmentNote
Supersedes ASTM D 7776. (10/2017)
DocumentType
Redline
Pages
25
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 3831 : 2012 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D 5501 : 2012 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM D 94 : 2007 : R2012 Standard Test Methods for Saponification Number of Petroleum Products
ASTM D 7578 : 2015-06 GUIDE FOR CALIBRATION REQUIREMENTS FOR ELEMENTAL ANALYSIS OF PETROLEUM PRODUCTS AND LUBRICANTS
ASTM D 7040 : 2004 : R2010 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 5184 : 2012 : R2017 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 6375 : 2009 : R2014 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D 7623 :2010 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D 3831 : 2012 : R2017 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D 7776 : 2012 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017)
ASTM D 5059 : 2014-07 TEST METHODS FOR LEAD IN GASOLINE BY X-RAY SPECTROSCOPY
ASTM D 7623 : 2010 : R2015 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D 7740 : 201 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
ASTM D 3348 : 2012 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
ASTM D 6334 : 2012 : R2017 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM D 7060 : 2012 : R2014 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM D 7591 : 2012 : R2017 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 94 : 2007 Standard Test Methods for Saponification Number of Petroleum Products
IES RP 27.3:2017 Recommended Practice for Photobiological Safety for Lamps – Risk Group Classification and Labeling
ASTM D 7372 : 2017 : REDLINE Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM D 7060 : 2012 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM D 7040 :2004 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
EI/JIG 1530 : 2013 QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS
ASTM D 7876 : 2013 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
ASTM D 7483 : 2013 : REV A Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D 7620 : 2010 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM D 7622 : 2010 : R2015 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D 6334 : 2012 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM D 7040 : 2004 : R2015 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7622 : 2010 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D 8001 : 2016 : EDT 1 Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
ASTM D 7740 : 2011 : R2016 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
ASTM D 8071 : 2017 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM D 7691 : 2016 : REDLINE Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5501 : 2012 : EDT 1 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM D 7961 : 2017 : REDLINE Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
ASTM D 7483 : 2013 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D 7751 : 2016 : REDLINE Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D 7483 : 2013 : REV A : R2017 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D 3237 : 2017 : REDLINE Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D 94 : 2007 : R2012 : EDT 1 Standard Test Methods for Saponification Number of Petroleum Products
ASTM D 5501 : 2012 : R2016 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM D 3244 : 2016-06 PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS
ASTM D 7319 : 2017 : REDLINE Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 8110 : 2017 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D 4323 : 2015 : REDLINE Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
ASTM D 7591 : 2012 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 7303 : 2017 : REDLINE Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7328 : 2017 : REDLINE Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 8149 : 2017 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
ASTM D 94 : 2007 : R2017 Standard Test Methods for Saponification Number of Petroleum Products
ASTM D 7620 : 2010 : R2015 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM D 7622 : 2010 : EDT 1 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D 8003 : 2015 Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
ASTM D 1266 : 2018 : REDLINE Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 7111 : 2016 : REDLINE Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7778 : 2015 : REDLINE Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 6375 : 2009 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
EI/JIG 1530 : 2019 Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4)
ASTM D 8056 : 2016 Standard Guide for Elemental Analysis of Crude Oil
ASTM D 5184 : 2012 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 3348 : 2012 : R2017 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (Withdrawn 2022)

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ASTM D 7372 : 2017 : REDLINE Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM E 177 : 2014 : REDLINE Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASQ Q9000:2005 Quality Management Systems - Fundamentals And Vocabulary
ASTM D 6617 : 2017 : REDLINE Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D 3244 : 2016-06 PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS
ASTM E 994 : 1995 Standard Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition (Withdrawn 2004)
ASTM D 86 : 2017-06 TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
ISO Guide 30:2015 Reference materials Selected terms and definitions
ISO 4259:2006 Petroleum products Determination and application of precision data in relation to methods of test
ASTM E 1323 : 2015 : REDLINE Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM D 5191 : 2015-10 TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD)

View more information
$176.78
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more