Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 6917 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
Available format(s)

Hardcopy , PDF

Superseded date

18-06-2022

Language(s)

English

Published date

09-03-2016

1.1This guide provides recommendations for the selection of appropriate test methods for prefabricated vertical geocomposite drains (sometimes referred to as Wick Drains) used in geotechnical engineering applications to provide consistency in data reporting.

1.2This guide includes test methods for all types of prefabricated geocomposite drains manufactured in a plant and consisting of a polymeric core structure with a synthetic fabric (geotextile) jacket for filtration.

1.3This guide is intended to aid all personnel involved in the selection, manufacture, installation, or evaluation of prefabricated vertical drains.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 35
DocumentType
Guide
Pages
2
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 5101 : 1999 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
ASTM D 5322 : 1998 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM D 5567 : 1994 : R2001 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
ASTM D 4884 : 2013 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
ASTM D 5567 : 1994 : R1999 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
ASTM D 4884 : 2009 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D 5199 : 2012 : R2019 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
ASTM D 6389 : 1999 : R2005 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
ASTM D 6918 : 2003 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D 4716 : 2008 : R2013 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 4533 : 2004 : R2009 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4491 : 1999 : REV A : R2009 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 6918 : 2003 : R2007 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D 4533 : 2011 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4533 : 2004 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4533 : 1991 : R1996 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4716 : 2000 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 4751 : 2021 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 4884 : 2012 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D 4716 : 2002 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 7498 : 2009 Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test
ASTM D 5199 : 2001 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
ASTM D 4751 : 1999 : REV A Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D 4751 : 2004 Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D 4491 : 1999 : REV A : R2004 : EDT 1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4884 : 1996 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D 4632 : 1991 : R1996 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 5493 : 1993 : R1998 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D 6918 : 2009 : R2014 : EDT 1 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D 6364 : 2006 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D 5819 : 2021 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D 5819 : 2005 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D 4751 : 1999 : REV A : R2004 Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D 5101 : 2012 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
ASTM D 5819 : 2018 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D 4716 : 2008 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 4751 : 2021 : REV A Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 4716 : 2004 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 5322 : 1998 : R2009 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM D 4491 : 1999 : REV A : R2014 : EDT 1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4716 : 2003 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 6389 : 1999 : R2016 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
ASTM D 6364 : 2006 : R2018 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D 5567 : 1994 : R2006 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
ASTM D 5493 : 2006 : R2016 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D 6918 : 2009 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D 6364 : 2006 : R2011 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D 5101 : 2001 : R2006 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
ASTM D 4716 : 2007 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 6241 : 2014 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4751 : 2012 Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D 5567 : 1994 : R2018 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
ASTM D 6241 : 2004 : R2009 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4884 : 2009 : EDT 1 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D 6241 : 1999 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 5199 : 2012 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
ASTM D 6389 : 2017 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
ASTM D 5493 : 2006 : R2011 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D 5199 : 2011 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
ASTM D 5819 : 2005 : R2016 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D 5322 : 1998 : R2003 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM D 5322 : 2017 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM D 6389 : 1999 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
ASTM D 6241 : 2004 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4632 : 2008 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 4751 : 2020 : REV B Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 5819 : 1999 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D 6241 : 2004 : R2009 : EDT 1 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4751 : 2016 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 5493 : 1993 : R2003 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D 5199 : 2001 : R2006 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
ASTM D 5101 : 2012 : R2017 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
ASTM D 5493 : 2006 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D 5819 : 2005 : R2012 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D 4491 : 1999 : REV A Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4491 : 1999 : REV A : R2004 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4716 : 2001 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 4632 : 1991 : R2003 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 6389 : 1999 : R2012 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
ASTM D 6364 : 1999 Standard Test Method for Determining the Short-Term Compression Behavior of Geosynthetics
ASTM D 5567 : 1994 : R2011 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
ASTM D 5101 : 2001 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio

View more information
$108.03
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more