Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

14-10-2013

Publisher

American Society for Testing and Materials

1.1This test method is commonly referred to as the Mack T-10.² This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics, including lead corrosion and wear of piston rings and cylinder liners.

1.2This test method also provides the procedure for running an abbreviated length test, which is commonly referred to as the T-10A. The procedures for the T-10 and T-10A are identical with the exception of the items specifically listed in Annex A8. Additionally, the procedure modifications listed in Annex A8 refer to the corresponding section of the T-10 procedure.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Annex A7 for specific Safety Hazards.

Committee	D 02
DocumentType	Test Method
Pages	38
PublisherName	American Society for Testing and Materials
Status	Current

ASTM D 4485 : 2020	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 7549 : 2021	Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

ASTM D 5967 : 2015	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 4485 : 2003 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 2622 : 1992 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 5844 : 1998	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)
ASTM D 3338 : 1992	Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 6681 : 2014	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 2274 : 2010	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4485 : 2006	Standard Specification for Performance of Engine Oils
ASTM D 2622 : 1987 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 2709 : 1996 : R2011 : EDT 1	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 2709 : 1996 : EDT 2	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 4485 : 2011 : REV C	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5967 : 2019	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 6681 : 2001	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
ASTM D 1319 : 1989	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
ASTM D 1319 : 2008	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 5967 : 2014	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 4485 : 2001	Standard Specification for Performance of Engine Oils
ASTM D 5967 : 2008	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 5185 : 1997	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5967 : 2009	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 2274 : 2001	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 5967 : 2021	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 6681 : 2015	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 4485 : 2003	Standard Specification for Performance of Engine Oils
ASTM D 4052 : 1996 : R2002 : EDT 1	Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 4485 : 2008	Standard Specification for Performance of Engine Oils
ASTM D 4739 : 2005	Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM D 2709 : 1996 : R2006	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 4485 : 2015	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 1319 : 2018	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 4485 : 2005 : REV A	Standard Specification for Performance of Engine Oils
ASTM E 344 : 2018	Terminology Relating to Thermometry and Hydrometry
ASTM D 2500 : 2016 : REV B	Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 4052 : 2018 : REV A	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 5967 : 2012	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 1319 : 2014	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 6078 : 1999	Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
ASTM D 4485 : 2011 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5967 : 2003	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 6078 : 2004 : R2016	Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) (Withdrawn 2021)
ASTM E 344 : 2001 : REV A	Terminology Relating to Thermometry and Hydrometry
ASTM D 3338 : 2000	Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM E 29 : 2002	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 2622 : 1998	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 3338 : 2004	Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 2500 : 2016 : REV A	Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 2274 : 2003 : REV A : R2008	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 2500 : 2016	Standard Test Method for Cloud Point of Petroleum Products
ASTM D 1319 : 1999	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 4485 : 2018	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5185 : 2005	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4052 : 2009	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 2274 : 2014 : R2019	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 5967 : 2004	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 235 : 2022	Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
ASTM D 5185 : 2002	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4485 : 2011 : REV B	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 2622 : 2008	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4485 : 2016	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4485 : 2007	Standard Specification for Performance of Engine Oils
ASTM D 6681 : 2004	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
ASTM D 4485 : 2010	Standard Specification for Performance of Engine Oils
ASTM E 178 : 2016 : REV A	Standard Practice for Dealing With Outlying Observations
ASTM D 5185 : 2018	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4485 : 2001 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 5186 : 2019	Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
ASTM D 1319 : 2002 : REV A	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 2274 : 2003	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 2709 : 2016	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 2500 : 1999	Standard Test Method for Cloud Point of Petroleum Products
ASTM D 2500 : 2002 : EDT 1	Standard Test Method for Cloud Point of Petroleum Products
ASTM D 6078 : 2004 : R2010	Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
ASTM D 6483 : 1999	Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine
ASTM D 4739 : 2008	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 2500 : 2005	Standard Test Method for Cloud Point of Petroleum Products
ASTM D 976 : 2021	Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D 5185 : 2013 : EDT 1	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 93 : 1990 : EDT 1	Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM D 5186 : 1999	Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
ASTM D 4485 : 2004	Standard Specification for Performance of Engine Oils
ASTM D 445 : 1988	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
ASTM D 6078 : 2004	Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
ASTM D 2500 : 2002	Standard Test Method for Cloud Point of Petroleum Products
ASTM D 2500 : 2011	Standard Test Method for Cloud Point of Petroleum Products
ASTM D 4739 : 2017	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 5967 : 2015 : REV A	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 2500 : 2009	Standard Test Method for Cloud Point of Petroleum Products
ASTM D 4739 : 2006	Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM E 178 : 2021	Standard Practice for Dealing With Outlying Observations
ASTM D 4485 : 2000	Standard Specification for Performance of Engine Oils
ASTM D 4739 : 1996	Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM D 2500 : 2017	Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 4052 : 2011	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E 178 : 2000	Standard Practice for Dealing With Outlying Observations
ASTM D 5186 : 2003 : R2009	Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
ASTM D 1319 : 2003	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 4052 : 2016	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4485 : 2015 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5185 : 2013	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 664 : 1995	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D 2622 : 2003	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 1319 : 2010	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 5967 : 2011	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 5186 : 2015	Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography
ASTM E 178 : 1994	Standard Practice for Dealing With Outlying Observations
ASTM D 5967 : 2017	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 4485 : 2006 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4739 : 2011 : R2017	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 445 : 2019 : REV A	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2274 : 1994 : R1999 : EDT 1	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 2500 : 2017 : REV A	Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 5967 : 2007	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 5967 : 2010	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 4052 : 1996	Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 4739 : 2008 : EDT 1	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 235 : 2002 : R2012	Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) (Withdrawn 2021)
ASTM D 4485 : 2018 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 2622 : 2010	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5302 : 2001	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2709 : 1988	Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge
ASTM D 4485 : 2005	Standard Specification for Performance of Engine Oils
ASTM D 5185 : 2009	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 93 : 2000	Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 445 : 2001	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D 2622 : 2021	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6681 : 2016	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 445 : 2021	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 5186 : 2003	Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
ASTM D 4485 : 2014	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5967 : 2013	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 93 : 1985	Standard Test Method for Flash Point by Pensky-Martens Closed Tester
ASTM D 4485 : 2002	Standard Specification for Performance of Engine Oils
ASTM D 5967 : 2012 : REV A	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 2622 : 2007	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6681 : 2010	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
ASTM D 2274 : 2003 : REV A	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4485 : 2005 : EDT 1	Standard Specification for Performance of Engine Oils
ASTM D 6681 : 2013	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 2622 : 1994	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 5967 : 2005	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 976 : 2006 : R2016	Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D 2622 : 2005	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5185 : 2002 : EDT 1	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 6681 : 2009	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
ASTM D 6681 : 2008	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
ASTM D 5967 : 2010 : REV A	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 1319 : 2015	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 6681 : 2017	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 5185 : 2002 : EDT 2	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4739 : 2011	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 4739 : 2002	Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM D 1319 : 2013	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 5186 : 1991	Standard Test Method for Determination of Aromatic Content of Diesel Fuels by Supercritical Fluid Chromatography
ASTM D 4052 : 2015	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 3338 : 2005	Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 445 : 2021 : EDT 1	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4739 : 2006 : REV A	Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM D 5967 : 1999 : REV A	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 93 : 1997	Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 6681 : 2010 : REV A	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
ASTM D 3338 : 2008	Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3338 : 1995	Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 2274 : 2001 : REV A	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 6483 : 2003	Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine
ASTM D 4485 : 2009	Standard Specification for Performance of Engine Oils
ASTM D 2274 : 2014	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4485 : 2019	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 6681 : 2005	Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
ASTM D 6483 : 2004	Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)
ASTM D 4485 : 2010 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4485 : 2011	Standard Specification for Performance of Engine Oils
ASTM D 1319 : 2019	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 4052 : 2018	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 5186 : 2020	Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
ASTM D 1319 : 2002	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 5302 : 2000 : REV A	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 2622 : 2016	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2709 : 1996 : R2001 : EDT 1	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 4485 : 2007 : REV A	Standard Specification for Performance of Engine Oils