Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 7001 : 2020

Current
Current

The latest, up-to-date edition.

Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2020

1.1This specification covers geocomposite drainage panels used in highway, turf, and other high-volume subsurface drainage applications. These products consist of a geotextile wrapped around a polymer core. These products are a minimum of 25 mm (1 in.) thick and are available in 150-mm (6 in.), 300-mm (12 in.), 450-mm (18 in.), and 600-mm (24 in.) widths.

1.2The requirements of this specification are intended to provide a subsurface drainage geocomposite suitable for drainage of surface and subsurface water, sewerage, and leachates. Products produced in accordance with this specification and intended for pavement drainage applications shall be installed in accordance with Practice D6088.

1.3The values as stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 35
DocumentType
Standard
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 6244 : 2006 : R2018 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D 6088 : 2006 : R2016 Standard Practice for Installation of Geocomposite Pavement Drains
ASTM D 7931 : 2018 Standard Guide for Specifying Drainage Geocomposites
ASTM D 6364 : 2006 : R2018 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D 6707/D6707M : 2006 : R2019 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications

ASTM D 4439 : 2020 Standard Terminology for Geosynthetics
ASTM D 4354 : 2012 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing
ASTM D 6088 : 2006 : R2022 Standard Practice for Installation of Geocomposite Pavement Drains
ASTM D 4533/D4533M : 2015 : R2023 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4533/D4533M : 2015 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4354 : 2012 : R2020 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing
ASTM D 4632/D4632M : 2015 : REV A Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 4716/D4716M : 2022 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 3350 : 2021 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D 4751 : 2021 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 3350 : 2014 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D 4491/D4491M : 2020 : EDT 1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4491/D4491M : 2022 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4751 : 2021 : REV A Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 4355/D4355M : 2021 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus
ASTM D 4716/D4716M : 2020 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 2122 : 2022 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D 6241 : 2014 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4491/D4491M : 2021 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4439 : 2024 Standard Terminology for Geosynthetics
ASTM D 4439 : 2023 : REV A Standard Terminology for Geosynthetics
ASTM D 4439 : 2023 : REV B Standard Terminology for Geosynthetics
ASTM D 4355/D4355M : 2014 : R2018 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus
ASTM D 6241 : 2022 Standard Test Method for Static Puncture Index Strength of Geotextiles and Geotextile-Related Products Using a 50 mm Probe
ASTM D 2122 : 2016 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D 4751 : 2020 : REV B Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 4751 : 2016 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 6088 : 1997 Standard Practice for Installation of Geocomposite Pavement Drains
ASTM D 6241 : 2022 : REV A Standard Test Method for Measuring Static Puncture Strength of Geotextiles and Geosynthetic-Related Products Using a 50 mm Probe
ASTM D 4632/D4632M : 2015 : REV A : R2023 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 4439 : 2023 Standard Terminology for Geosynthetics

View more information
$103.13
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more