Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor (Withdrawn 2021)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-03-2014

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 04.03, 2015 Defines the preparation and compaction of cylindrical specimens of dense-graded cold mix asphalt (CMA) using the Superpave gyratory compactor (SGC).

1.1This test method concerns the preparation and compaction of cylindrical specimens of dense-graded cold mix asphalt (CMA) using the Superpave gyratory compactor (SGC).

1.2This test method is applicable for road mixes or plant mixes prepared at ambient temperatures.

1.3This test method also refers to the determination of the bulk specific gravity of the compacted CMA.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5A precision and bias statement for this test method has not been developed at this time. Therefore, this test method should not be used for acceptance or rejection of a material for purchasing purposes.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	D 04
DocumentType	Test Method
Pages	4
ProductNote	Reconfirmed EDT 1
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 7229 : 2008

ASTM D 6925 : 2008	Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D 2726 : 2005	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D 6934 : 2004	Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM D 977 : 1998	Standard Specification for Emulsified Asphalt
ASTM D 3628 : 2006	Standard Practice for Selection and Use of Emulsified Asphalts
ASTM D 2726 : 2004	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D 6925 : 2007	Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM C 566 : 2013 : REDLINE	TEST METHOD FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING
ASTM D 2726 : 2010	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D 6925 : 2015 : REDLINE	Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D 2041 : 2000	Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ASTM D 6934 : 2008 : R2016	Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM D 3203 : 1994 : R2000	Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
ASTM D 1188 : 2007 : EDT 1	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D 6752 : 2003 : EDT 1	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D 4215 : 1996	Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
ASTM D 6998 : 2019	Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
ASTM D 1188 : 2007	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D 2041 : 2003 : REV A	Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ASTM D 1188 : 2007 : R2015	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D 6752 : 2002 : REV A	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D 6998 : 2004	Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
ASTM D 2397 : 2012	Standard Specification for Cationic Emulsified Asphalt
ASTM D 2726 : 2000	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D 2041 : 2003	Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ASTM D 1188 : 1996 : R2002 : EDT 1	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D 6925 : 2015	Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D 6752 : 2003	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D 6752 : 2002	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D 6925 : 2006	Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D 3628 : 1997	Standard Practice for Selection and Use of Emulsified Asphalts
ASTM D 2726 : 2008	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D 3203 : 2005	Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
ASTM D 2397 : 2002	Standard Specification for Cationic Emulsified Asphalt
ASTM D 8 : 2021	Standard Terminology Relating to Materials for Roads and Pavements
ASTM D 1188 : 1996 : R2002	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D 3628 : 2015	Standard Practice for Selection and Use of Emulsified Asphalts
ASTM D 2726 : 2009	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D 8 : 2019	Standard Terminology Relating to Materials for Roads and Pavements
ASTM D 4215 : 2007 : R2013	Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
ASTM D 1188 : 1996 : EDT 1	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D 4215 : 2007	Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
ASTM D 6925 : 2009	Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D 6934 : 2008	Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM D 2726 : 2005 : REV A	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D 3628 : 2008	Standard Practice for Selection and Use of Emulsified Asphalts
ASTM D 2397 : 2005	Standard Specification for Cationic Emulsified Asphalt
ASTM D 8 : 2020 : REV A	Standard Terminology Relating to Materials for Roads and Pavements
ASTM D 2397 : 1998	Standard Specification for Cationic Emulsified Asphalt
ASTM D 3628 : 2001	Standard Practice for Selection and Use of Emulsified Asphalts
ASTM D 6925 : 2003	Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D 6998 : 2011 : REDLINE	Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
ASTM D 6998 : 2011	Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
ASTM D 2489 : 2002	Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
ASTM D 2489 : 2000	Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
ASTM D 6752 : 2009	Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D 2726 : 2011	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures