Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 7314 : 2010 : R2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
Available format(s)

Hardcopy , PDF

Superseded date

12-05-2021

Language(s)

English

Published date

03-07-2015

CONTAINED IN VOL. 05.06, 2015 Defines the determination of the heating value measurement of gaseous fuels using a calorimeter.

1.1This practice is for the determination of the heating value measurement of gaseous fuels using a calorimeter. Heating value determination of sample gasses containing water vapor will require vapor phase moisture measurements of the pre-combustion sample gas as well as the non-condensed gasses exiting the calorimeter. Instruments equipped with appropriate conditioners and algorithms may provide heating value results on a net or gross and dry or wet basis.

1.2This practice is applicable to at-line and in-line instruments that are operated from time to time on a continuous basis.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 03
DocumentType
Standard Practice
Pages
10
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 4891 : 2013 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
ASTM D 6621 : 2000 : R2017 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 6299 : 2010 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2013 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6621 : 2000 : R2006 : EDT 1 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 6122 : 2010 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 3588 : 1998 : R2017 : EDT 1 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D 3588 : 1998 : R2017 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D 6299 : 2017 : REV A Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2017 : REV B Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3764 : 2013 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 1826 : 1977 Standard Test Method for Calorific Value Of Gases In Natural Gas Range By Continuous Recording Calorimeter
ASTM D 6299 : 2009 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6122 : 2013 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 6299 : 2013 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6122 : 2006 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D 3764 : 2015 : EDT 1 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 3764 : 2001 Standard Practice for Validation of Process Stream Analyzer Systems
ASTM D 5287 : 1997 Standard Practice for Automatic Sampling of Gaseous Fuels
ASTM D 4891 : 1989 : R2006 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM D 6299 : 2010 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3764 : 2006 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 6122 : 2015 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 3764 : 1992 : R1998 Standard Practice for Validation of Process Stream Analyzer Systems
ASTM D 5503 : 1994 : R2003 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
ASTM D 4891 : 2013 : R2018 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
ASTM D 6122 : 2019 : REV B Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 7164 : 2010 : R2015 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D 3588 : 1998 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D 6122 : 2001 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D 6299 : 2000 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2010 : EDT 2 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2016 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6122 : 2019 : REV A Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 6122 : 2018 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 4150 : 2019 Standard Terminology Relating to Gaseous Fuels
ASTM D 6621 : 2000 : R2012 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 6299 : 2019 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2000 : REV A Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1070 : 2003 : R2017 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D 1070 : 1985 : R1998 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D 5287 : 2008 Standard Practice for Automatic Sampling of Gaseous Fuels
ISO 14532:2014 Natural gas — Vocabulary
ASTM D 6122 : 2016-02 PRACTICE FOR VALIDATION OF THE PERFORMANCE OF MULTIVARIATE ONLINE, AT-LINE, AND LABORATORY INFRARED SPECTROPHOTOMETER BASED ANALYZER SYSTEMS
ASTM D 1070 : 2003 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D 6621 : 2000 : R2006 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 4150 : 2008 Standard Terminology Relating to Gaseous Fuels
ASTM D 6299 : 2020 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2008 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3764 : 2015 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 4150 : 2000 Standard Terminology Relating to Gaseous Fuels
ASTM D 5287 : 2008 : R2015 Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024)
ASTM D 6621 : 2000 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 4891 : 1989 : R2001 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM D 6299 : 2002 : EDT 1 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3588 : 1998 : R2003 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D 3764 : 2009 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 6122 : 2019 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 3588 : 1998 : R2011 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D 1826 : 1994 : R1998 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D 5503 : 1994 : R1999 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
ASTM D 1826 : 1994 : R2017 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D 4891 : 1989 : R1994 : EDT 1 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM D 4150 : 2003 Standard Terminology Relating to Gaseous Fuels
ASTM D 5503 : 1994 : R2008 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation (Withdrawn 2017)
ASTM D 6122 : 2006 : EDT 1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ISO 7504:2015 Gas analysis Vocabulary
ASTM D 7164 : 2010 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D 6122 : 1999 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D 6299 : 2007 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4150 : 2008 : R2016 Standard Terminology Relating to Gaseous Fuels
ASTM D 6299 : 2007 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1826 : 1994 : R2010 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D 6299 : 2017 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7164 : 2005 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D 1070 : 2003 : R2010 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D 6122 : 2009 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D 1826 : 1994 : R2003 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D 6299 : 2002 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance

View more information
$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more