ASTM D 7457 : 2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF
18-11-2019
English
01-01-2012
CONTAINED IN VOL. 06.04, 2017 Defines the measurement of chloride in aromatic hydrocarbons, their derivatives, and related chemicals as defined by the method. Aromatics typically do not have any source of chlorides other than organic.
1.1 This test method covers the measurement of chloride in aromatic hydrocarbons, their derivatives, and related chemicals as defined by the method. Aromatics typically do not have any source of chlorides other than organic. The presence of metallic or inorganic chlorides is theoretically possible but not likely and this method does not purport to address recovery of those compounds.
1.2 This test method is applicable to samples with chloride concentrations from 0.24 to 5.0 mg/kg. The test method limit of detection (LOD) is 0.07 mg/kg.
1.3 This test method is preferred over Test Method D5194 for products, such as styrene, that are polymerized by the sodium biphenyl reagent.
1.4 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 9.
| Committee |
D 16
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| Supersedes |
| ASTM D 7124 : 2017 : REDLINE | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
| ASTM D 7185 : 2017 : REDLINE | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
| ASTM D 7124 : 2017 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
| ASTM D 7185 : 2017 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
| ASTM D 5211 : 2017 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
| ASTM D 2359 : 2019 | Standard Specification for Refined Benzene-535 |
| ASTM D 7185 : 2019 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
| ASTM D 5211 : 2019 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
| ASTM D 5211 : 2017 : REDLINE | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
| ASTM D 1555M : 2008 : EDT 1 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 6809 : 2002 : R2016 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 5194 : 2013 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 4052 : 1996 : R2002 : EDT 1 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 1555M : 2004 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 3437 : 1999 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3505 : 1996 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 4052 : 2009 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1555M : 2000 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metric] |
| ASTM D 3437 : 2010 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 1555M : 2004 : EDT 1 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 3505 : 2012 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 1555M : 2016 : REDLINE | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 3505 : 1996 : R2006 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 4052 : 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4052 : 2016 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 5194 : 1996 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 1555M : 2016 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 6809 : 2002 : R2012 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 3505 : 2018 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023) |
| ASTM D 5194 : 2011 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 5194 : 2004 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 5194 : 2018 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 3437 : 2011 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3437 : 2015 : REDLINE | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 3437 : 2008 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3437 : 2003 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 6809 : 2002 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 5194 : 2011 : REV A | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 5194 : 2006 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 1555M : 2004 : REV A | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 6809 : 2002 : R2007 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 4052 : 2015 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 3505 : 1996 : R2000 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 4052 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 3505 : 2012 : EDT 1 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.