Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 7467 : 2020 : REV A

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
Available format(s)

Hardcopy , PDF

Superseded date

02-11-2023

Language(s)

English

Published date

17-06-2020

1.1This specification covers fuel blend grades of 6 volume percent to 20 volume percent (%) biodiesel with the remainder being a light middle or middle distillate diesel fuel, collectively designated as B6 to B20. These grades are suitable for various types of diesel engines.

1.1.1The biodiesel component of the blend shall conform to the requirements of Specification D6751. The remainder of the fuel shall be a light middle or middle distillate grade diesel fuel conforming to Specification D975 grades No. 1-D and No. 2-D of any sulfur level specified with the following exceptions. The light middle or middle distillate grade diesel fuel whose sulfur level, aromatic level, cetane, or lubricity falls outside of Specification D975 may be blended with biodiesel meeting Specification D6751, provided the finished mixtures meets this specification.

1.1.2The fuel sulfur grades are described as follows:

1.1.2.1Grade B6 to B20 S15—A fuel with a maximum of 15 ppm sulfur.

1.1.2.2Grade B6 to B20 S500—A fuel with a maximum of 500 ppm sulfur.

1.1.2.3Grade B6 to B20 S5000—A fuel with a maximum of 5000 ppm sulfur.

1.2This specification prescribes the required properties of B6 to B20 biodiesel blends at the time and place of delivery. The specification requirements may be applied at other points in the production and distribution system when provided by agreement between the purchaser and the supplier.

1.2.1Nothing in this specification shall preclude observance of federal, state, or local regulations that may be more restrictive.

Note 1:The generation and dissipation of static electricity can create problems in the handling of distillate diesel fuel oils. For more information on this subject, see Guide D4865.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Standard
Pages
22
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7687 : 2023 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D 7548 : 2022 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
ASTM D 7668 : 2017 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 7463 : 2021 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 7861 : 2014 : R2019 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM D 8166 : 2022 Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors
ASTM E 1259 : 2023 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390 °C
ASTM D 7545 : 2014 : R2019 : EDT 1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
ASTM D 7261 : 2022 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D 2274 : 2014 : R2019 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 975 : 2023 Standard Specification for Diesel Fuel
ASTM D 8274 : 2020 : REV A Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D 8144 : 2022 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography

ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4865 : 2019 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 5772 : 2020 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
ASTM D 5771 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
ASTM D 3120 : 1996 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6890 : 2018 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6890 : 2021 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7619 : 2022 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 7220 : 2012 : R2017 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 6468 : 2008 : R2019 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D 613 : 2018 : REV A Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM D 86 : 2023 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 664 : 2017 : REV A Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D 7371 : 2014 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM D 3828 : 1998 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 7371 : 2014 : R2022 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM D 1319 : 2018 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 975 : 2022 Standard Specification for Diesel Fuel
ASTM D 86 : 2020 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 482 : 2013 Standard Test Method for Ash from Petroleum Products
ASTM D 7945 : 2021 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D 613 : 2023 Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM D 6890 : 2022 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3828 : 2016 : REV A : R2021 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 975 : 2019 : REV B Standard Specification for Diesel Fuel
ASTM D 6304 : 2004 : REV A : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 86 : 2018 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 7689 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 5773 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 4308 : 2013 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D 5773 : 2020 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D 7397 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
ASTM D 2624 : 2021 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 445 : 2021 : EDT 2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 975 : 2021 Standard Specification for Diesel Fuel
ASTM D 93 : 2019 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D 6217 : 2021 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration<rangeref></rangeref >
ASTM D 445 : 2017 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 86 : 2019 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 2709 : 2016 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 2500 : 1999 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 2624 : 2021 : REV A Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 976 : 2021 Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D 4539 : 2022 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D 613 : 2018 : REV A : EDT 1 Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM D 6079 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 5772 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 86 : 2012 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM D 93 : 1990 : EDT 1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM D 445 : 1988 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
ASTM D 975 : 2020 : REV C Standard Specification for Diesel Fuel
ASTM D 1552 : 2023 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM D 4294 : 2008 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 6468 : 2022 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D 2880 : 2023 Standard Specification for Gas Turbine Fuel Oils
ASTM D 2880 : 2020 Standard Specification for Gas Turbine Fuel Oils
ASTM D 6217 : 2018 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 5771 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 56 : 2021 : REV A Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 7042 : 2021 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3828 : 2016 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 664 : 1995 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D 976 : 2021 : EDT 1 Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D 4737 : 2021 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 86 : 2020 : REV B Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 56 : 2016 : REV A Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 1552 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM D 7397 : 2020 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
ASTM D 4737 : 2010 : R2016 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 86 : 2016 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 6751 : 2023 : REV A Standard Specification for Biodiesel Fuel Blendstock (B100) for Middle Distillate Fuels
ASTM D 5773 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D 4865 : 1998 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 6751 : 2020 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 2500 : 2017 : REV A Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 2624 : 2001 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 7689 : 2020 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5453 : 2016 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 7619 : 2017 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 7220 : 2022 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 6468 : 2008 : R2013 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D 445 : 2019 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 56 : 2021 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 5772 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
ASTM D 2709 : 2022 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 130 : 2018 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D 975 : 2022 : REV A Standard Specification for Diesel Fuel
ASTM D 4294 : 2021 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 93 : 2000 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 445 : 2001 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D 2622 : 2021 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 664 : 2011 : REV A Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D 6751 : 2023 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 86 : 2020 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 93 : 1985 Standard Test Method for Flash Point by Pensky-Martens Closed Tester
ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 976 : 2006 : R2016 Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D 524 : 2015 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D 975 : 2023 Standard Specification for Diesel Fuel
ASTM D 56 : 2022 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 7945 : 2021 : REV A Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM E 1064 : 2023 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 7042 : 2021 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 5453 : 2019 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 56 : 1987 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D 445 : 2018 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 86 : 2015 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 4308 : 2021 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D 2500 : 2023 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4539 : 2017 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D 5771 : 2020 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
ASTM D 1552 : 2016 : R2021 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM D 2624 : 2015 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 93 : 1997 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D 86 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 6079 : 2022 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM E 1064 : 2016 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 1319 : 2019 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 2624 : 2022 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 130 : 2012 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D 1319 : 2002 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 8183 : 2022 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 93 : 2018 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D 4539 : 1998 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
$176.78
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more