Standard Practice for Installation of Vulcanized Rubber Linings

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-09-2017

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 06.02, 2018 Describes the techniques used to install rubber lining sheet stock in metal tanks, pipes, and other components.

1.1This practice covers the techniques used to install rubber lining sheet stock in metal tanks, pipes, and other components. Installation requirements, procedures, inspection instructions, and storage conditions for the lined tanks or equipment are outlined.

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 33
DocumentType	Standard Practice
Pages	9
ProductNote	Reconfirmed 2017
PublisherName	American Society for Testing and Materials
Status	Current

ASTM D 2240 : 2000	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 5162 : 2008	Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
ASTM D 5162 : 2015 : REDLINE	Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
ISO 8502-3:2017	Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ASTM D 4538 : 2005 : EDT 1	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
NACE SP 01 88 : 2006	DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES
ASTM D 429 : 2014 : R2023	Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
NACE SP 01 78 : 2007	DESIGN, FABRICATION, AND SURFACE FINISH PRACTICES FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE
ASTM D 429 : 2014 : REDLINE	Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
ASTM D 4417 : 1993 : R1999	Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D 4417 : 2011	Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D 4538 : 2005	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D 5162 : 2021	Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
ASTM D 5162 : 2001	Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
ASTM E 1216 : 1999	Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM D 2240 : 2004	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4417 : 2014 : REDLINE	Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D 4538 : 2015	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D 4417 : 2003	Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D 4285 : 1983 : R2018	Standard Test Method for Indicating Oil or Water in Compressed Air
ASTM D 2240 : 2004 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM E 1216 : 2021	Standard Practice for Sampling for Particulate Contamination by Tape Lift
SSPC-GUIDE 15 : 2013	FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES
ASTM D 2240 : 2015 : R2021	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 5162 : 2015	Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
ASTM E 1216 : 2011	Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM D 4285 : 1983 : R2006	Standard Test Method for Indicating Oil or Water in Compressed Air
ASTM D 2240 : 2002	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4285 : 1983 : R2012	Standard Test Method for Indicating Oil or Water in Compressed Air
ASTM D 429 : 2014	Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
ASTM E 1216 : 2006	Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E 1216 : 2011 : R2016	Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM D 4285 : 1983 : R1999	Standard Test Method for Indicating Oil or Water in Compressed Air
ASTM D 2240 : 2015	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2003	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4538 : 2021	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D 4538 : 2013	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D 2240 : 2002 : REV B	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2015 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4417 : 2014	Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D 2240 : 2005	Standard Test Method for Rubber Property—Durometer Hardness
SSPC-SP 5 : 2015	WHITE METAL BLAST CLEANING
ASTM E 1216 : 1999 : R2005	Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM D 4538 : 1995	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D 2240 : 2005 : R2010	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 5162 : 2000	Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
ASTM D 2240 : 2002 : REV A	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4538 : 2015 : REDLINE	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D 429 : 2014 : EDT 1	Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates