ASTM D 7889 : 2013

Name: ASTM D 7889 : 2013
Brand: ASTM
Price: 122.77 AUD

Superseded

View Superseded by

Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy

Available format(s)

Hardcopy , PDF

Superseded date

22-09-2021

Language(s)

English

Published date

24-10-2013

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 05.05, 2018 Defines the use of a grating spectrometer to analyze properties of an in-service fluid sample which are indicative of the status of that fluid and related machinery.

1.1This test method describes the use of a grating spectrometer to analyze properties of an in-service fluid sample which are indicative of the status of that fluid and related machinery.

1.2This test method provides a means for the assessment of in-service fluid properties using infrared spectroscopy. It describes a methodology for sampling, performing analysis, and providing key in-service fluid properties with a self-contained unit that is meant for field use. It provides analysis of in-service fluids at any stage of their useful life, including newly utilized fluid.

1.3In particular, these key in-service fluid properties include oxidation, nitration, sulfation, soot, and antiwear additives. They are applicable for hydrocarbon type (API Group I-IV) fluids from machinery lubricants, including reciprocating engine oils, turbine oils, hydraulic oils, and gear oils.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4.1Exception—The unit for wavenumbers is in cm^-1.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	D 02
DocumentType	Test Method
Pages	8
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 7889 : 2021

ASTM D 4057 : 2019	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 1995	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7669 : 2011	Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM D 7720:2011	Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
ASTM D 7418 : 2012 : R2019	Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D 7418 : 2012	Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM E 2617 : 2009 : REV A	Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM D 7844 : 2018	Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 4057 : 2012 : R2018	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7418 : 2007	Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM E 932 : 1989 : R2013	Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E 2412 : 2010 : R2018	Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 4057 : 1981 : EDT 2	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7415 : 2018	Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E 1655 : 2004	Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E 2617 : 2008	Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E 932 : 1989 : R2021	Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E 2617 : 2008 : REV A	Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM D 4057 : 2006	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7414 : 2009	Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 4057 : 2012	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7669 : 2015	Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM D 7415 : 2009	Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7624 : 2018	Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7412 : 2009	Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E 1655 : 2017	Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E 2617 : 2017	Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM D 7624 : 2010	Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7412 : 2018	Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E 1655 : 2000	Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E 2412 : 2010	Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7669 : 2015 : REDLINE	Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM E 1655 : 2005	Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E 2617 : 2010	Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E 2412 : 2004	Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7414 : 2018	Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7418 : 2012 : REDLINE	Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM E 2617 : 2008 : REV A : EDT 1	Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM D 7720 : 2011 : R2017	Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
ASTM D 4057 : 1995 : R2000	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM E 1655 : 2005 : R2012	Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM D 4057 : 2006 : R2011	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7844 : 2012	Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E 168 : 2016	Standard Practices for General Techniques of Infrared Quantitative Analysis