ASTM D 792 : 2013 : REDLINE

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Add to Watchlist

View superseded by

This Standard has been added successfully to your Watchlist
Please visit My Watchlist to see all standards that you are watching.

Please log in or create an account to add this standard to your Watchlist.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

Available format(s): PDF

Superseded date: 05-08-2020

Language(s): English

Published date: 01-11-2013

Publisher: American Society for Testing and Materials

Add to Watchlist

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 08.01, 2015 Defines the determination of the specific gravity (relative density) and density of solid plastics in forms such as sheets, rods, tubes, or molded items.

Scope - (Show below) - (Hide below)

1.1These test methods describe the determination of the specific gravity (relative density) and density of solid plastics in forms such as sheets, rods, tubes, or molded items.

1.2Two test methods are described:

1.2.1Test Method A—For testing solid plastics in water, and

1.2.2Test Method B—For testing solid plastics in liquids other than water.

1.3The values stated in SI units are to be regarded as the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1—This standard is not equivalent to ISO 1183–1 Method A. This test method provides more guidelines on sample weight and dimension. ISO 1183-1 allows testing at an additional temperature of 27 ± 2°C.

General Product Information - (Show below) - (Hide below)

Committee	D 20
Document Type	Redline
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 792 : 2020 : REDLINE
Supersedes	ASTM D 792 : 2020 : REDLINE

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM D 1593 : 2013 : REDLINE	Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
ASTM F 636 : 1985 : R1991	Guide for Selection of Tests for Material Properties of Transfer Molding Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)
ASTM D 7471 : 2009 : R2014	Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
SAE AMS 3209 : 2014	CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 65 - 75
MIL-C-47224 Revision B:1993	COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT
ASTM D 8101/D8101M : 2017	Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
ASTM D 5436 : 2015 : REDLINE	Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
SAE AMS 3658 : 2011	POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS, PREMIUM STRENGTH, SINTERED AND STRESS-RELIEVED, RADIOGRAPHICALLY INSPECTED
MIL-B-44421 Base Document:1991	Body Armor, Small Arms Protective, Aircrew, Survival (No S/S Document)
CSA S807 : 2010 : R2015	SPECIFICATION FOR FIBRE-REINFORCED POLYMERS
96/702229 DC : 0	PREN 4236 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; EXTRUDED PTFE TUBE FOR TEMPERATURES BETWEEN -70 DEGREES C AND +250 DEGREES C
MIL-P-50900 Base Document:1971	PELLET, PLASTIC BONDED HMX (95/5) FOR USE IN AMMUNITION
MIL PRF 11891 : F	TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR - ELASTOMERIZED
SAE AMS 3912 : 2014	RADOMES, FOAM SANDWICH, POLYIMIDE/QUARTZ CLOTH CONSTRUCTION
ASTM F 510 : 1993 : R1999	Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
MIL-PRF-5425 Revision E:1998	PLASTIC SHEET, ACRYLIC, HEAT RESISTANT
CSA N285.5 : 2013	PERIODIC INSPECTION OF CANDU NUCLEAR POWER PLANT CONTAINMENT COMPONENTS
L-P-535 Revision E:1979	PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
MIL-PRF-46846 Revision D:2013	Rubber, Synthetic, Heat - Shrinkable
SAE AMS 3731 : 2016	POTTING COMPOUND, EPOXY, BISPHENOL A-TYPE
SAE AS 4388 : 2013	HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC
MIL-P-25518 Revision B:1981	PLASTIC MATERIALS, SILICONE RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED
CSA Z245.20-Z245.21 : 2006	EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE
ASTM D 6457 : 2008	Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
MIL-M-24476 Revision B:1993	MOUNT, RESILIENT, TYPES 7M5O, 6M15O, 6M45O AND 6M9OO
MIL-DTL-24191 Revision D:1996	PLASTIC SHEET, CELL OR CONTINUOUS CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING)
MIL-B-41816 Revision H:1990	BOOTS, COLD WEATHER, INSULATED, RUBBER (WET-COLD; DRY-EXTREME COLD)
MIL P 85891 : A	PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS
ASTM D 1457 : 1992	Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)
MIL-P-48648 Base Document:1986	PROJECTILE, 155MM, TEST, NON-HAZARDOUS, M718A1/M741A1 TYPES LOADING, ASSEMBLING AND PACKING OF
MIL-DTL-24487 Revision B:2005	TILE, RUBBER VIBRATION DAMPING, TYPE 5
MIL-M-48245 Revision B:1988	MOLDING COMPOUND, HOUSING
MIL-PRF-46197 Revision A:1997	LAMINATE: HIGH-STRENGTH GLASS, FABRIC-REINFORCED, POLYESTER RESIN PREIMPREGNATED
MIL-A-63187 Base Document:1982	ADHESIVE, POLYAMIDE EPOXY M753 8 INCH PROJECTILE
ASTM D 5476 : 1999	Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)
MIL-DTL-11891 Revision G:1998	TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR: ELASTOMERIZED
MIL M 17508 : F	MOUNTS, RESILIENT: TYPES 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, AND 6E900BB
MIL-DTL-32169 Base Document:2004	WHEEL ASSEMBLIES, POLYURETHANE; FOR THE BRADLEY FIGHTING VEHICLE
MIL-DTL-17508 Revision G:2017	Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB
ASTM E 1783 : 1996 : R2000	Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
MIL-DTL-24709 Revision A:2018	PADS, DISTRIBUTED ISOLATION MATERIAL, TYPE R-50-21/64
ASTM F 1837M : 1997	Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
ASTM F 942 : 2002	Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM F 1876 : 1998 : R2003 : EDT 1	Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications (Withdrawn 2012)
ASTM D 6416/D6416M : 2016 : REDLINE	Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM F 878 : 1995	Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000)
MIL-P-46122 Revision B:1975	PLASTIC MOLDING MATERIAL AND PLASTIC EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE POLYMER AND COPOLYMER
A-A-59530 Revision A:2000	BOOT, SAFETY, (8 INCH)
MIL-R-47025 Revision A:1991	RESIN, CASTING, FIRE RETARDANT, EPOXY BASE
CSA B481 SERIES : 2012	GREASE INTERCEPTORS
MIL-P-46185 Base Document:1983	PLASTIC MOLDING & EXTRUSION MATERIALS, POLYETHERSULFONE
MIL-C-13125 Revision C:1983	COMPOUND: MOUNTING FOR OPTICAL LENS BLANKS
MIL H 27267 : B	HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE
MIL-P-43043 Revision C:1978	PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
03/312144 DC : DRAFT JULY 2003	ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
ASTM D 1201 : 2013 : REDLINE	Standard Specification for Thermosetting Polyester Molding Compounds
MIL-P-53028 Base Document:1983	PROPELLANT, ROCKET MOTOR, ROCKET, HIGH EXPLOSIVE, 345 MILLIMETER, XM 130
MIL T 24487 : A	TILE, RUBBER VIBRATION DAMPING, TYPE MIRL NO. 3
MIL P 8184 : E	PLASTIC SHEET, ACRYLIC, MODIFIED
MIL-P-70762 Base Document:1990	PROPELLANT, COMPOSITE, CAST FOR USE IN SIMULATOR, MISSILE: SAGGER XM27
ANSI S2.22 : 1998 : R2007	RESONANCE METHOD FOR MEASURING THE DYNAMIC MECHANICAL PROPERTIES OF VISCOELASTIC MATERIALS
ASTM D 5687/D5687M : 1995 : R2015	Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
CSA B481 SERIES : 2012 : R2017	GREASE INTERCEPTORS
L-P-1041 Revision A:1973	PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER
MIL-C-47244 Revision A:1990	COATING, ABLATIVE RESISTANT
MIL-P-46133 Revision A:1974	PLASTIC MOLDING AND EXTRUSION MATERIAL, POLY (ARYL SULFONE ETHER) RESIN, THERMOPLASTIC
SAE AS 81765 : 2017	INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
ASTM F 599 : 1995	Standard Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
API SPEC 17J : 2014	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ASTM F 942 : 2002 : R2008	Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM D 7766/D7766M : 2016 : REDLINE	Standard Practice for Damage Resistance Testing of Sandwich Constructions
ASTM D 3795 : 2000 : REV A	Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ISO 18437-2:2005	Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 2: Resonance method
ASTM D 3308 : 2012 : R2017	Standard Specification for PTFE Resin Skived Tape
ANSI S2.22 : 1998	RESONANCE METHOD FOR MEASURING THE DYNAMIC MECHANICAL PROPERTIES OF VISCOELASTIC MATERIALS
ASTM D 7176 : 2006	Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
ASTM D 4321 : 2015 : REDLINE	Standard Test Method for Package Yield of Plastic Film
ASTM A 974 : 1997 : R2016	Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
ISO 14607:2007	Non-active surgical implants Mammary implants Particular requirements
ASTM F 2881 : 2011	Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 7248/D7248M : 2012 : R2017	Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 3410/D3410M : 2016 : REDLINE	Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 6415/D6415M : 2006 : REV A : EDT 1	Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 1248 : 2016 : REDLINE	Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM F 602 : 2009	Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM F 1551 : 2009	Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
SAE AMS 3255 : 2017	SEALING TAPE, SHEET, OR GASKET, POLYTETRAFLUOROETHYLENE, EXPANDED (EPTFE) OIL AND WATER RESISTANT
ASTM F 2818 : 2010 : R2014 : EDT 1	Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
SAE AMS 3670/1 : 2004	UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES
ASTM D 2344/D2344M : 2016 : REDLINE	Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 705 : 1999 : R2012	Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM D 5212 : 2003	Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004)
ASTM F 2881 : 2011 : R2015	Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 2103 : 2015 : REDLINE	Standard Specification for Polyethylene Film and Sheeting
ASTM D 7137/D7137M : 2017 : REDLINE	Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D 6779 : 2017 : REDLINE	Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
ASTM D 619 : 2014	Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D 5379/D5379M : 2012 : REDLINE	Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D 7136/D7136M : 2015 : REDLINE	Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D 7905/D7905M : 2014	Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 705 : 1999 : R2004	Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM D 3368 : 2017 : REDLINE	Standard Specification for FEP Sheet and Film
ASTM D 3308 : 2012	Standard Specification for PTFE Resin Skived Tape
ASTM D 5577 : 1994	Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM D 3214 : 1996	Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation (Withdrawn 2002)
ISO 21809-1:2011	Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ASTM E 1612 : 1994 : R2000	Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ISO 15676:2016	Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
ASTM E 1556 : 2012 : REDLINE	Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
ASTM D 3981 : 2009 : REV A : R2016	Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D 6411/D6411M : 1999 : R2005	Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM F 2468 : 2005 : R2011	Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM D 5467/D5467M : 1997 : R2017	Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM A 974 : 1997 : R2011	Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
ASTM E 1612 : 1994 : R2005	Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 1039 : 2016 : REDLINE	Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
ASTM D 705 : 1999	Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM F 2818 : 2010 : R2014	Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ASTM D 3489 : 2017 : REDLINE	Standard Test Methods for Microcellular Urethane Materials
ASTM D 7078/D7078M : 2012 : REDLINE	Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D 7914/D7914M : 2014	Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM F 1551 : 2009 : R2017	Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
ASTM D 4242 : 2007	Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
NFPA 262 : 2015	METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES
BS EN ISO 13628-2:2006	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ISO 13628-10:2005	Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
MIL H 25579 : E	HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR
MIL-P-46131 Revision B:1975	PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED, GLASS FIBER REINFORCED
MIL-P-46120 Revision B:1983	PLASTIC MOLDING AND EXTRUSION MATERIAL POLYSULFONE
MIL-P-46129 Revision A:1975	PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED
MIL-P-46144 Revision C:1986	PLASTIC SHEET, POLYCARBONATE
MIL P 46169 : A	PLASTIC, SHEET MOLDING COMPOUND, POLYESTER, GLASS FIBER REINFORCED (FOR GENERAL PURPOSE APPLICATIONS)
MIL-P-46179 Revision A:1986	PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE
MIL-P-46161 Revision A:1976	PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS FIBER REINFORCED
MIL-P-46115 Revision B:1977	PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE
SAE AMS 3659 : 2011	POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS PREMIUM STRENGTH, SINTERED AND STRESS-RELIEVED
ASTM D 3124 : 1998 : R2011	Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
MIL-C-47221 Revision A:1982	COMPOUND, MOLDING, EPOXY RESIN, SILICON DIOXIDE AND ASBESTOS FIBER FILL
ASTM F 876 : 2017 : REDLINE	SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING
MIL-DTL-27267 Revision D:2012	Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure
MIL-I-23594 Revision C:1988	INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE SENSITIVE
MIL I 23053 : D	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED
ASTM E 1783 : 1996 : R2005	Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
WW-L-2887 Base Document:1998	TUBE, PHENOLIC, POROUS RETAINER FOR USE IN INSTRUMENT BEARINGS
MIL-P-63208 Revision B:1985	PROJECTILE, 105 MM, HEAT T, M622 METAL PARTS
CSA S808 : 2014	SPECIFICATION FOR FIBRE-REINFORCED POLYMER (FRP) MATERIALS FOR EXTERNALLY REINFORCING STRUCTURES
SAE AMS 3733 : 2015	POTTING COMPOUND, EPOXY, TWO PART, HIGHLY FILLED, HEAT CURE, HIGH COMPRESSIVE STRENGTH
SAE J 2253 : 2017	TEST PROCEDURES FOR AUTOMOTIVE STRUCTURAL COMPOSITE MATERIALS
MIL R 46846 : B	RUBBER, SYNTHETIC, HEAT-SHRINKABLE
ASTM D 4617 : 2003	Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012)
SAE AMS 3652 : 2015	POLYTETRAFLUOROETHYLENE (PTFE) FILM, NON-CRITICAL GRADE
MIL-P-43038 Revision B:1973	PLASTIC MOLDING MATERIAL, POLYESTER, LOW PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT
MIL P 5425 : D	PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT
DOD-C-70514 Base Document:1985	Cartridge, 120MM, Super Slug, Load, Assemble, and Pack
MIL-I-82819 Base Document:1986	INSULATION, THERMAL, POLYISOPRENE, SILICA & ASBESTOS FILLED
MIL T 11891 : E	TRACK SHOE ASSEMBLY, TRACK SHOE SETS, TRACK SHOE PADS, & TRACK SHOE BUSHINGS, VEHICULAR, ELASTOMERIZED
MIL-P-60811 Revision B:1984	PROJECTILE, 105 MM, TP-T, M489 METAL PARTS ASSEMBLY
MIL-DTL-32435 Base Document:2013	HOSE, POLYTETRAFLUOROETHYLENE, CONVOLUTED, 450 DEGREES F, MEDIUM PRESSURE
SAE AMS 3670 : 2003	POLYAMIDE-IMIDE BAR, ROD, & SHAPES, MOLDED OR EXTRUDED
MIL-P-81255 Revision A:1976	PLASTIC MOLDING MATERIAL, ASBESTOS PHENOLIC
ASTM D 7472 : 2009 : R2014	Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
ASTM C 1115 : 2017 : REDLINE	Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
ASTM D 3295 : 2015 : REDLINE	Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
MIL-PRF-32407 Revision A:2016	MOUNTS, RESILIENT (SURFACE SHIP APPLICATION)
MIL-I-81765 Revision A:1987	INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
ASTM F 2805 : 2016 : REDLINE	Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
ASTM D 4242 : 2007 : R2013	Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
ASTM D 6867 : 2003	Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
AASHTO M 330 : 2013	SPECIFICATION FOR POLYPROPYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER
SAE AMS 3263 : 1997	SEALING COMPOUND, POLYTHIOETHER, AMBIENT CURE OR IMMEDIATE HEAT CURE FOR AIRCRAFT STRUCTURES, FUEL RESISTANT WITH INTERMITTENT USE TO 400 MDCF (204 MDCC)
04/301931 DC : DRAFT JAN 2004	ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
NF EN ISO 23936-1 : 2010	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-DTL-81716 Revision A:2009	PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F)
MIL-I-16923 Revision H:1991	INSULATING COMPOUND, ELECTRICAL, EMBEDDING, EPOXY
MIL D 24709 : 0	DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64
L-P-398 Revision B:1973	PLASTIC MOLDING MATERIAL STYRENE-BUTADIENE
MIL-P-22241 Revision B:1973	PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN)
MIL-B-43154 Revision M:1992	BOOTS, HOT WEATHER
MIL-L-24518 Base Document:1975	LAMINATE, VINYL FILM ALUMINUM, DECORATIVE
MIL-P-46067 Revision B:1977	PLASTIC EMBEDDING COMPOUND, EPOXY RESIN SYSTEM
SAE AMS 3102 : 2017	SEALING COMPOUND, POLYTHIOETHER RUBBER FAST CURING, LIGHT WEIGHT (SPECIFIC GRAVITY 0.78, MAX.) FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
BS ISO 12891-2:2014	RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
MIL-PRF-8184 Revision F:1998	PLASTIC SHEET, ACRYLIC MODIFIED
MIL-R-47004 Base Document:1974	RESIN, EPOXY BASE, THIXOTROPIC
ASTM D 3222 : 2005 : R2015	Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
MIL-P-50977 Base Document:1972	PELLETS (PBX) FOR USE IN AMMUNITION
MIL-P-46036 Revision B:1973	PLASTIC SHEET, RODS, TUBES AND DISCS, POLYCHLOROTRIFLUOROETHYLENE
A-A-2848 Base Document:1994	PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE (PET) AND GLYCOL MODIFIED POLYETHYLENE TEREPHTHALATE (PETG)
MIL-DTL-83528 Revision H:2018	GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI GENERAL SPECIFICATION FOR
ASTM D 5575 : 2007 : R2013	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM D 6856/D6856M : 2003 : R2008 : EDT 1	Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials
ASTM D 3039/D3039M : 2017 : REDLINE	Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
DOD-STD-35-36 Revision B:1979	AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING
ASTM D 1430 : 2017 : REDLINE	Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
SAE AMS 3811 : 2016	RODS, ARAMID FIBER, POLYESTER RESIN COATED, PULTRUSION
ASTM D 6411/D6411M:1999	Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
SAE AMS 3897 : 2016	CLOTH, CARBON FIBER, RESIN IMPREGNATED
ASTM F 635 : 1985 : R1991	Guide for Selection of Tests for Material Properties of Liquid Thermoset Encapsulating Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)
ASTM F 2042 : 2000 : R2005	Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
ASTM D 704 : 1999	Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM F 3087 : 2015	Standard Specification for Acrylic Molding Resins for Medical Implant Applications
MIL-E-82898 Base Document:1994	EXPLOSIVE, PLASTIC BONDED, CAST PBX(AF)-108
L-P-399 Revision B:1970	PLASTIC MOLDING MATERIAL, ION MATERIAL, STYRENE ACRYLONITRILE COPOLYMERS
API 17L1 : 2013	SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
MIL-DTL-64154 Revision B:2008	LAMINATE: FIBERGLASS-FABRIC-REINFORCED, PHENOLIC
MIL W 83420 : E	WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL
MIL-P-82650 Base Document:1976	PLASTIC MOLDING MATERIAL, GLASS PHENOLIC
MIL-A-50424 Base Document:1969	ACETAL, SHEETING (FOR USE WITH AMMUNITION)
MIL-C-82805 Base Document:1989	COMPOUND, SILICONE RUBBER, HIGH STRENGTH, TWO-PART
ASTM F 2042 : 2000 : EDT 1	Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
SAE AS 38390 : 2013	HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 160 DEGREES F, COVERED PNEUMATIC
SAE AS 22759 : 2014	WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
ASTM D 8066/D8066M : 2017	Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
SAE J 1875 : 2001	MATERIALS FOR PLASTIC CHECK VALVES FOR VACUUM BOOSTER SYSTEMS
ASTM D 5449/D5449M : 2016 : REDLINE	Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
SAE AMS 3668 : 2011	POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS, PREMIUM GRADE, AS SINTERED
AWWA C901 : 2017	POLYETHYLENE (PE) PRESSURE PIPE AND TUBING, 3/4 IN. (19 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE
ANSI/AAMI/ISO 15676:2016	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
NSF 52 : 2017	SUPPLEMENTAL FLOORING
SAE AMS 3259 : 1997	SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C)
ASTM D 5514/D5514M : 2018 : REDLINE	Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
SAE AS 81550A : 2014	INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE
ASTM F 665 : 2009 : R2015	Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
ASTM F 1837M : 1997 : R2012 : EDT 1	Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
NORSOK M-710:2014	QUALIFICATION OF NON-METALLIC MATERIALS AND MANUFACTURERS - POLYMERS
SAE AMS 3678 : 2016	POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS AND EXTRUSIONS, UNFILLED, PIGMENTED, AND FILLED
ASTM D 704 : 1999 : R2012	Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM A 978/A978M : 2008	Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
ASTM D 7205/D7205M : 2006 : R2016	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM F 2150 : 2013 : REDLINE	Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
ASTM D 7031 : 2011 : REDLINE	GUIDE FOR EVALUATING MECHANICAL AND PHYSICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE PRODUCTS
(INACTIVE RECORD)ASTM D 5336 : 2015-04	CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS
ASTM C 364/C364M : 2016 : REDLINE	Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D 4067 : 2016 : REDLINE	Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM E 1612/E1612M : 1994 : R2017	Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 6856 : 2003 : R2008	Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials
ASTM D 4801 : 2008	Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater
ASTM D 7205/D7205M : 2006 : R2011	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D 3935 : 2015 : REDLINE	Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D 3275 : 2008 : R2013	Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D 6867 : 2003 : R2014	Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
ASTM D 4000 : 2016 : REDLINE	Standard Classification System for Specifying Plastic Materials
ASTM F 2026 : 2017 : REDLINE	Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM D 3350 : 2014 : REDLINE	Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D 6455 : 2011	Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
ASTM D 3275 : 2008	Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D 5450/D5450M : 2016 : REDLINE	Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 5575 : 2007	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM F 3219 : 2017	Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
ASTM F 988 : 1986	Guide for Specifying Carbon-Fiber Randomly Reinforced Ultra-High-Molecular-Weight Polyethylene for Medical Devices (Withdrawn 1992)
ASTM D 5140 : 1995	Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004)
ASTM D 6457 : 2008 : R2013	Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Withdrawn 2018)
ASTM F 3253 : 2017	Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
ASTM D 1675 : 2003 : R2011	Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D 3159 : 2015 : REDLINE	Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
ASTM D 4066 : 2013	Standard Classification System for Nylon Injection and Extrusion Materials (PA)
ASTM D 704 : 1999 : R2004	Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM D 6856/D6856M : 2003 : R2016	Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
ASTM F 2896 : 2011 : R2017	Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
ASTM F 561 : 2013	Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM E 990 : 2013 : REDLINE	Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
ASTM F 2854 : 2010	Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
ASTM D 7913/D7913M : 2014	Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
I.S. EN ISO 13628-2:2006	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
SAE AS 23053 : 2016	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
AASHTO R 63 : 2013	PRACTICE FOR SOLID WALL HIGH-DENSITY POLYETHYLENE (HDPE) CONDUIT FOR NON-PRESSURE APPLICATIONS USED FOR THE PROTECTION OF POWER AND TELECOMMUNICATIONS CABLES
ASTM D 5977 : 2015 : REDLINE	Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
ASTM D 3981 : 2009 : REV A	Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
MIL H 38390 : C	HOSE ASSEMBLY, TETRAFLUOROETHYLENE PNEUMATIC, HIGH PRESSURE
MIL-P-63293 Revision B:1983	PROJECTILE, 105 MM, HEAT T MP, M456A2 METAL PARTS ASSEMBLY
SAE AMS 3662 : 2015	POLYTETRAFLUOROETHYLENE FILM, GENERAL PURPOSE GRADE
MIL-DTL-26633 Revision F:2014	HOSE ASSEMBLY, NONCONDUCTIVE, POLYTETRAFLUOROETHYLENE, OXYGEN
ASTM D 6495/D6495M : 2018 : REDLINE	Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
MIL-DTL-83723-27 Revision C:2015	CONNECTORS, ELECTRICAL, BACKSHELL, WITH HEAT-SHRINKABLE STRAIN-RELIEF BOOT (STRAIGHT AND RIGHT ANGLE), THREADED COUPLING
MIL-A-81264 Base Document:1965	ASBESTOS FELT OR MAT, RESIN IMPREGNATED
ASTM D 7205/D7205M:2006	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
MIL-H-38360 Revision B:1966	HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC
ASTM D 3287 : 1989	Specification for Biaxially Oriented Polyethylene (PEO) Plastic Pipe (SDR-PR) Based on Controlled Outside Diameter (Withdrawn 1989)
ASTM D 3795 : 2000 : REV A : R2012	Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D 2734 : 2016 : REDLINE	Standard Test Methods for Void Content of Reinforced Plastics
MIL-PRF-2765 Revision E:2004	RUBBER SHEET, STRIP, EXTRUDED, AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT
L-C-530 Revision C:1987	COATING, PIPE, THERMOPLASTIC RESIN
MIL G 47034 : A NOTICE 1	GLASS, FILTER, COLORED
SAE AMS 3669 : 2012	POLYTETRAFLUOROETHYLENE (PTFE) SHEET, MOLDED, PREMIUM GRADE, AS SINTERED
ASTM D 8131/D8131M : 2017	Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
ASTM D 6394 : 2014 : REDLINE	Standard Specification for Sulfone Plastics (SP)
10/30191247 DC : DRAFT APR 2010	BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
ASTM D 6645 : 2001	Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D 5577 : 1994 : R2003	Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
API 15LT : 1993	SPECIFICATION FOR PVC LINED STEEL TUBULAR GOODS
CSA S807 : 2010	SPECIFICATION FOR FIBRE-REINFORCED POLYMERS
SAE AMS T 81914 : 2013	TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
ASTM D 787 : 2012-08	SPECIFICATION FOR ETHYL CELLULOSE MOLDING AND EXTRUSION COMPOUNDS
AWWA D121 : 2014	BOLTED ABOVEGROUND THERMOSETTING FIBERGLASS-REINFORCED PLASTIC PANEL-TYPE TANKS FOR WATER STORAGE
MIL-P-60646 Revision B:1984	PROJECTILE, 105 MM, HEAT-T, M456A1 METAL PARTS
ASTM D 349 : 2013 : REDLINE	Standard Test Methods for Laminated Round Rods Used for Electrical Insulation
MIL-G-47032 Revision A:1990	GLASS, POTASH SODA BARIUM, LEAD FREE COMPRESSION SEALING
ASTM D 6264/D6264M : 2017 : REDLINE	Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM D 2287 : 2012 : REDLINE	Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
SAE AMS 3906 : 2016	GLASS TAPE AND FLAT SHEET, NON-WOVEN CLOTH EPOXY RESIN IMPREGNATED, FOR HAND AND MACHINE LAYUP
A-A-58092 Base Document:1997	TAPE, ANTISEIZE, POLYTETRAFLUOROETHYLENE
ASTM D 2474 : 1992	Specification for Vinyl Chloride Copolymer Resins (Withdrawn 1999)
A-A-55697 Revision B:2012	Tube, Nonmetallic; Polyvinyl Chloride (PVC) Flexible (for Laboratory and Medical Use)
SAE AS 81914 : 2016	TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
SAE AMS 3829 : 2016	CLOTH, TYPE 'E' GLASS, STYLE 7781 FABRIC, SOLUTION-ADDITION-TYPE PMR 15 POLYIMIDE RESIN IMPREGNATED
SAE AMS 3656 : 2011	POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS, NORMAL STRENGTH, AS SINTERED
UNI EN ISO 23936-1 : 2009	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-P-48649 Base Document:1986	PROJECTILE, 155MM, M718A1/M741A1 TYPES, LOADING, ASSEMBLING AND PACKING OF
ASTM D 4549 : 2015 : REDLINE	Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D 3307 : 2016 : REDLINE	Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
SAE AMS P 46144 : 2015	PLASTIC SHEET, POLYCARBONATE
MIL-P-63514 Revision A:1986	PROJECTILE, 105MM, TP-T, M489A1, METAL PARTS ASSEMBLY
A-A-59528 Base Document:1999	SHOE, MOLDERS
ANSI S2.22 : 1998 : R2012	RESONANCE METHOD FOR MEASURING THE DYNAMIC MECHANICAL PROPERTIES OF VISCOELASTIC MATERIALS
NACE RP 01 85 : 0	EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE
L-P-391 Revision D:1975	PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTIAPPLICATIONS)
L-P-1183 Revision B:1977	PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID
MIL-DTL-19863 Revision E:2018	Mount, Resilient: Type 5B5,000H
SAE J 1345 : 1995	AUTOMOTIVE PLASTIC PARTS SPECIFICATION
SAE AMS 3847 : 1994(S2016)	CLOTH, QUARTZ, 'B' STAGE POLYIMIDE RESIN IMPREGNATED, STYLE 581 FABRIC, 315 DEGREES C (599 DEGREES F)
API 15LE : 2008 : R2013	SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
ASTM F 790 : 2008	Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM F 2929 : 2017 : REDLINE	Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
ASTM A 974 : 1997 : R2003	Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A-A-52407 Revision A:1998	GLASS, FILTER, COLORED
ASTM D 2671 : 2013	Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
MIL-T-81914 Base Document:1973	TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
ASTM D 5467/D5467M : 1997 : R2004	Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
MIL P 24191 : D	PLASTIC SHEET, CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING)
MIL-PRF-82736 Revision A:1988	IGNITION PELLETS, MAGNESIUM-FLUOROCARBON
L-P-600 Revision A:1972	PORTFOLIO, PLASTIC
MIL C 47070 : 0	COMPOUND, URETHANE
SAE AMS 3628 : 2011	PLASTIC EXTRUSIONS AND MOLDINGS, POLYCARBONATE, GENERAL PURPOSE
MIL-PRF-19769 Revision C:2009	GASKETS, SYNTHETIC RUBBER, OIL RESISTANT, SLIDE VALVE (FOR 21-INCH SUBMERGED TORPEDO TUBES)
SAE AS 2078 : 2015	TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE)
CSA B137 COMPENDIUM : 2017	THERMOPLASTIC PRESSURE PIPING COMPENDIUM
ASTM D 3124 : 1998 : R2003	Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
SAE AMS 3657 : 2011	POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS, PREMIUM STRENGTH, AS SINTERED
ASTM PS 93 : 1998	Provisional Standard Specification for Fabricated Shapes and Finished Parts Fabricated From Polyimide Resins (Withdrawn 2001)
ASTM D 3553 : 1976 : R1996	Standard Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites (Withdrawn 2000)
SAE AS 85848 : 2017	SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
CSA C22.2 No. 18.3 : 2012	CONDUIT, TUBING, AND CABLE FITTINGS
C22.2 NO. 18.3-12 (R2017)	Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B)
ASTM F 942 : 2002 : R2013	Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
API TR 1PER15K-1 : 2013	PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
SAE AMS 3844 : 2016	CLOTH, TYPE 'E' GLASS, STYLE 7781 FABRIC - HOT MELT, ADDITION TYPE, POLYIMIDE RESIN IMPREGNATED
ASTM E 2203 : 2014 : R2018	Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
ASTM D 3124 : 1998	Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D 7957/D7957M : 2017	Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
ASTM D 5889/D5889M : 2018 : REDLINE	Standard Practice for Quality Control of Geosynthetic Clay Liners
SAE AMS 3377 : 2015	SEALING COMPOUND, ELECTRICALLY CONDUCTIVE CORROSION INHIBITING
SAE AMS 3359 : 2016	SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 TO 400 POISES (20 TO 40 PAS) VISCOSITY
SAE AMS 3812 : 2016	RODS, GLASS FIBER, POLYESTER RESIN, LOADED PULTRUSION
ASTM D 7471 : 2009	Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
AWWA C906:2015	POLYETHYLENE (PE) PRESSURE PIPE AND FITTINGS, 4 IN. THROUGH 65 IN. (100 MM THROUGH 1,650 MM), FOR WATERWORKS
ASTM D 729 : 1995	Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000)
ASTM D 6742/D6742M : 2017 : REDLINE	Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ANSI/AWWA C224 : 2017	NYLON-11-BASED POLYAMIDE COATINGS AND LININGS FOR STEEL WATER PIPE AND FITTINGS
BS ISO 18437-2 : 2005	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD
ASTM E 285 : 2008 : R2015	Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM D 3795 : 2000 : REV A : R2006	Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ACI 423.7 : 2014	SPECIFICATION FOR UNBONDED SINGLE-STRAND TENDON MATERIALS
ASTM F 510 : 1993 : R2008	Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
UNI EN ISO 21809-1 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
ASTM D 7332/D7332M : 2016 : REDLINE	Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
SAE MA 2126 : 2015	HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), UP TO 232 DEGREES C AND 10 500 KPA PROCUREMENT SPECIFICATION, METRIC
ASTM D 5204 : 2017 : REDLINE	CLASSIFICATION SYSTEM FOR POLYAMIDE-IMIDE (PAI) MOLDING AND EXTRUSION MATERIALS
SAE AMS 3960 : 2015	ADVANCED COMPOSITES PREPREG - NOMINAL 250 DEGREES F CURE - CARBON FIBER AND EPOXY RESIN, UNIDIRECTIONAL TAPE
FM 4880 : 2017	EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS
ASTM F 602 : 2009 : R2014	Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM D 4203 : 2017 : REDLINE	Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
ASTM D 6339 : 2011	Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ASTM A 978/A978M : 2008 : R2013	Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications (Withdrawn 2020)
API 15S : 2016	SPOOLABLE REINFORCED PLASTIC LINE PIPE
ASTM E 285 : 2008	Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM D 5229/D5229M : 2014-06	TEST METHOD FOR MOISTURE ABSORPTION PROPERTIES AND EQUILIBRIUM CONDITIONING OF POLYMER MATRIX COMPOSITE MATERIALS
ASTM E 1783 : 1996 : R2009	Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM F 2042 : 2000 : R2011	Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication
ASTM D 4349 : 2016 : REDLINE	Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
ASTM D 6411/D6411M : 1999 : R2012	Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM F 510/F510M : 2014 : REDLINE	Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
ASTM F 423 : 1995	Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)
ASTM D 7291/D7291M : 2015 : REDLINE	Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D 305 : 1984 : R2003	Standard Test Method for Solvent-Extractable Material in Black Pigments
EN ISO 13628-2:2006/AC:2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
NASA KSC SPEC E 0029 : 1972	COMPOUND, POTTING AND MOLDING ELASTOMERIC, SPECIFICATION FOR
ASTM D 3485 : 2015	Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
CSA S806: 2012	DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
ASTM C 1349 : 2017 : REDLINE	Standard Specification for Architectural Flat Glass Clad Polycarbonate
S806-12 (R2017)	Design and construction of building structures with fibre-reinforced polymers
UNI EN ISO 13628-2 : 2007	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
EN ISO 13628-10:2006	Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
ASTM F 510 : 1993 : R2004	Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
ASTM D 6248 : 1998 : R2004	Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D 1045 : 2014 : REDLINE	Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
FM 4882 : 2016	CLASS 1 INTERIOR WALL AND CEILING MATERIALS OR SYSTEMS FOR SMOKE SENSITIVE OCCUPANCIES
SAE AMS 3903 : 2013	CLOTH, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS, EPOXY RESIN IMPREGNATED
ASTM D 2116 : 2016 : REDLINE	Standard Specification for FEP Resin Molding and Extrusion Materials
SAE AMS 3650 : 2012	RODS, SHEETS, AND MOLDED SHAPES, POLYCHLOROTRIFLURORETHYNEN (PCTFE) UNPLASTICIZED
MIL H 26633 : C	HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN
ASTM D 5514 : 2006	Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
MIL-P-85364 Revision A:1993	PROPELLANT CTBN 23-17
SAE AMS 3732 : 2015	POTTING COMPOUND, EPOXY ONE PART, FILLED, HEAT CURE, LOW CTE
MIL-I-7444 Revision D:1984	INSULATION SLEEVING, ELECTRICAL FLEXIBLE
MIL-T-47023 Base Document:1974	TAPE, HEAT SHRINKABLE
MIL-M-81999 Revision A:1977	MOLDING COMPOUND, REVERSION RESISTANT, NON-CARCINOGEN CURING POLYURETHANE AIRCRAFT STRUCTURE
ASTM D 6248 : 1998	Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
MIL-F-63463 Base Document:1979	FILM, INHIBITING, ETHYL, CELLULOSE
I.S. EN ISO 21809-1:2011	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
MIL-PRF-82791 Base Document:1990	RUBBER, SILICONE, RTV
03/305847 DC : DRAFT APR 2003	ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD
API 14A : 2015	SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
ASTM D 5687/D5687M : 1995 : R2002	Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
HH-G-156 Revision E:1993	GASKET MATERIAL, GENERAL PURPOSE, RUBBER SHEETS, STRIPS, AND SPECIAL SHAPES
MIL R 6855 : E	RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES
MIL-W-22759 Revision E:1990	WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
MIL-P-46121 Revision B:1977	ELASTIC SHEET AND COATING MATERIAL, PARA-XYLYLENE POLYMERS
MIL-I-50412 Base Document:1970	INITIATOR ASSEMBLY FOR PRIMER, ELECTRIC, XM91E1 AND XM117, PARTS FOR
IPC J STD 030 : A	SELECTION AND APPLICATION OF BOARD LEVEL UNDERFILL MATERIALS
MIL-M-46891 Revision A:1980	MOLDING COMPOUND, PHENOLIC RESIN, ASBESTOS REINFORCED
MIL-P-63196 Revision A:1980	POLYURETHANE ELASTOMER BINDER (FOR USE IN AMMUNITION)
SAE AMS 3208 : 2014	CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 45 - 55
SAE AMS 3670/3 : 2004	POLYAMIDE-IMIDE BAR, ROD, AND SHAPES, 12% GRAPHITE - 3% POLYTETRAFLUOROETHYLENE FILLED
MIL-C-24449 Revision A:1981	CAST POLYMETHYL METHACRYLATE FOR SHEET STOCK, CUSTOM CASTINGS AND FINISHED WINDOWS
I.S. EN ISO 14607:2009	NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS (ISO 14607:2018)
A-A-52047 Revision D:2013	TUBING, NONMETALLIC (RUBBER AND PLASTIC)
MIL-DTL-5516 Revision D:2008	Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)
ZZ-R-768 Revision B:2009	RUBBER FOR MOUNTINGS (UNBONDED-SPOOL AND COMPRESSION TYPES)
ASTM D 5687/D5687M :1995	Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
ASTM D 276 : 2012 : REDLINE	Standard Test Methods for Identification of Fibers in Textiles
ASTM D 3171 : 2015 : REDLINE	Standard Test Methods for Constituent Content of Composite Materials
MIL-R-14328 Revision B:1975	RUBBER SHEET, SYNTHETIC, MEDIUM SOFT, GENERAL-PURPOSE GASKET MATERIAL (FOR EXTREME CLIMATIC CONDITIONS)
H-B-00681 Revision D:1968	BRUSHES, TYPEWRITER
ASTM F 1876 : 1998	Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
ASTM F 624 : 2009	Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
MIL-P-48395 Base Document:1975	PELLETS, EXPLOSIVE COMPOSITIONS (FOR USE IN AMMUNITION)
MIL-DTL-32124 Revision A:2006	PROPELLANT, NSWC/IH-BC-15, NSWC/IH-BC-16, NSWC/IH-BC-17, NSWC/IH-BC-20, NSWC/IH-BC-21 AND NSWC/IH-BC-22
MIL-I-24768 Base Document:1992	INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR
DOD-STD-35-120 Base Document:1978	AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, LENSES, FILTERS, AND MIRRORS (OPTICAL)
MIL-M-63457 Revision A:1987	MINE, ANTITANK, HE, BLU-91/B LOADING, ASSEMBLING AND PACKING
ASTM D 5990 : 2000	Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007)
MIL-M-87176 Base Document:1982	MOLDING MATERIAL, POLYPROPYLENE, MODIFIED MECHANICAL USE ONLY
MIL-M-46862 Revision B:1992	MOLDING MATERIAL, GLASS, EPOXY IMPREGNATED
BS EN ISO 23936-1:2009	Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
MIL-M-48261 Base Document:1977	MINE, M718/M741 SYSTEM, METAL PARTS
MIL-DTL-19379 Revision C:2013	Mounts, Resilient, Mare Island Types 11M15, 11M25, and 10M50
MIL-DTL-21649 Revision D:2017	MOUNT, RESILIENT, TYPE 5M10,000-H
MIL-PRF-62419 Revision B:2010	COMPOSITE MATERIALS FOR MILITARY VEHICLES
13/30242622 DC : 0	BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
ADS-13F-HDBK : 1997	AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
ASTM D 3222 : 2005	Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM D 7176 : 2006 : R2011	Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
ASTM D 5448/D5448M : 2016 : REDLINE	Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 5467/D5467M : 1997 : R2010	Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
MIL M 19863 : D	MOUNT, RESILIENT, TYPE 5B5.000H
MIL-B-29604 Base Document:1994	BODY ARMOR, HARD, SMALL ARMS PROTECTIVE, PRU-61/P22P-15
L-P-504 Revision E:1991	PLASTIC SHEET AND FILM, CELLULOSE ACETATE
MIL-DTL-23053 Revision E:1996	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
MIL P 85548 : B	PROPELLANT, COMPOSITE, CAST, N-60
MIL-A-47315 Revision A:1991	ADHESIVE, POLYURETHANE
MIL-L-60326 Base Document:1965	LUBRICANT, FLUOROCARBON TELOMER DISPERSION (FOR USE WITH AMMUNITION)
ASTM A 975 : 2011 : R2016	Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
MIL-V-63118 Revision A:1978	VULCANIZED RUBBER OBTURATOR
SAE AMS 3205 : 2010	SYNTHETIC RUBBER, LOW-TEMPERATURE RESISTANT, 45-55
MIL-DTL-20268 Revision H:2017	FRAME, CAP
ASTM D 5205 : 2016 : REDLINE	Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
ASTM F 2820 : 2012	Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM E 1420 : 1991	Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996)
MIL PRF 3100 : F	WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED; FOR TRACK LAYING VEHICLES
MIL G 1149 : C	GASKET MATERIAL, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS
ASTM D 3965 : 2016 : REDLINE	Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
SAE AMS 3843 : 2014	POLYTETRAFLUOROETHYLENE SHEET, ASBESTOS FIBER REINFORCED, HIGH COMPRESSIBILITY, LOW DENSITY
SAE AMS 3306 : 2014	RUBBER, SILICONE 1200 PSI (8.27 MPA), HIGH MODULUS 55 - 65
API 15LE CHINESE : 2008	SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
SAE AMS 3867 : 2016	BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED
ASTM D 6484/D6484M : 2014 : REDLINE	Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
SAE AS 5127/1 : 2014	AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS
ASTM D 6388 : 1999 : R2012	Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
API 17J REDLINE : 2008	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
SAE AMS 3267 : 1992	SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES
BS EN ISO 21809-1:2011	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
SAE AMS 3849 : 2016	CLOTH, QUARTZ, STYLE 581 FABRIC - HOT MELT, ADDITION TYPE, POLYIMIDE RESIN IMPREGNATED
ASTM F 2848 : 2017 : REDLINE	Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
UNE-EN ISO 21809-1:2011	Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
ASTM D 1562 : 2015 : REDLINE	Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)
I.S. EN ISO 23936-1:2009	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
SAE AMS 3647 : 2015	POLYFLUOROETHYLENE PROPYLENE FILM AND SHEET
ASTM F 1837M : 1997 : R2002	Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
ASTM F 2968/F2968M : 2014	Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
ASTM D 7194 : 2012 : REDLINE	Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
ASTM C 297/C297M : 2016 : REDLINE	Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
SAE AS 4897 : 1994	HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR
ASTM D 707 : 2015 : REDLINE	Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
CGSB 138.1 : 1996 CORR 1996	FABRIC FOR CHAIN LINK FENCE
ASTM D 3222 : 2005 : R2010	Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
SAE AMS 3894 : 2016	CARBON FIBER TAPE AND SHEET, EPOXY RESIN IMPREGNATED
ASTM F 665 : 2009	Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
ASTM F 602 : 2009 : R2015	Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1	Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM F 2854 : 2010 : R2016	Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
ASTM D 5593 : 1999 : EDT 1	Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)
ASTM D 6645 : 2001 : R2010	Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM F 648 : 2014 : REDLINE	Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM D 7273 : 2008	Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM D 4801 : 2008 : R2016	Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
ASTM D 6455 : 2011 : R2018	Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)
ASTM F 1579 : 2002 : EDT 1	Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications (Withdrawn 2011)
SAE AMS 3756 : 2011	MOLDINGS, GLASS FIBER FILLED POLYTETRAFLUOROETHYLENE (PTFE) 75% PTFE RESIN, 25% GLASS FIBERS, AS SINTERED
ASTM F 2905/F2905M : 2013	Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
ASTM D 4242 : 2007 : R2017	Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
ASTM F 2042 : 2000	Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
ASTM E 1783/E1783M : 1996 : R2017	Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ISO 12891-2:2014	Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
EN ISO 14607:2018	Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08)
GOST 849:2018	Primary nickel. SpecificationsE
BS EN ISO 13628-10:2006	Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
ISO 23936-1:2009	Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
ISO 13628-2:2006	Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
EN ISO 21809-1:2011	Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
EN ISO 23936-1:2009	Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
MIL-S-83318 Revision A:1991	SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES
MIL-P-63238 Revision B:1986	PROJECTILE, 155MM, AT M718/M741 LOADING, ASSEMBLING AND PACKING OF
SAE AMS 3915 : 2015	ADVANCED COMPOSITES PREPREG - NOMINAL 250 DEGREES F CURE - GLASS FIBER AND EPOXY RESIN, 7781 WEAVE FABRIC
MIL-S-81256 Base Document:1965	SILICA FABRIC, PHENOLIC IMPREGNATED
SAE J 2028 : 2016	FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS
MIL H 85800 : 0	HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR
MIL-R-45906 Revision D:1984	RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK
L-P-392 Revision A:1964	PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION
MIL-PRF-15624 Revision H:2016	GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM)
SAE AMS 3667 : 2011	POLYTETRAFLUOROETHYLENE (PTFE) SHEET, MOLDED, GENERAL PURPOSE GRADE, AS SINTERED
MIL-R-46198 Base Document:1988	RESIN, POLYIMIDE, HOT PRESSED OR PRESSED AND SINTERED
MIL-B-21408 Revision G:1984	BOOTS, SAFETY
ASTM D 6867 : 2003 : R2009	Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
SAE AMS 3913 : 2014	RADOME, FOAM SANDWICH, HOT-MELT, ADDITION-TYPE POLYIMIDE
MIL H 83298 : A	HOSE, TETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI) HYDRAULIC AND PNEUMATIC
MIL-B-83277 Revision A:1975	BOOTS, FLYERS FWU-8/P
API 15LE : 2008(R2018)	SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
MIL P 008184 : D	PLASTIC SHEET, ACRYLIC, MODIFIED
ASTM D 7745 : 2011	Standard Practice for Testing Pultruded Composites
MIL L 46197 : (1)	LAMINATE: HIGH STRENGTH GLASS, FABRIC REINFORCED, POLYESTER RESIN PREIMPREGNATED
MIL-P-17549 Revision D:1981	PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL
ASTM D 7472 : 2009	Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
SAE J 517 : 2017	HYDRAULIC HOSE
ASTM D 1788 : 1981	Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics (Withdrawn 1988)
MIL-PRF-46103 Revision E:1998	ARMOR: LIGHTWEIGHT, COMPOSITE
CSA Z245.20 SERIES : 2014	PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
ASTM F 1579 : 2002	Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
ASTM F 604 : 1994	Specification for Silicone Elastomers Used in Medical Applications (Withdrawn 2001)
MIL R 82791 : 0	RUBBER, SILICONE, RTV
MIL-R-24719 Base Document:1989	RESINS, VINYL ESTER, LOW PRESSURE LAMINATING
L-P-380 Revision C:1973	PLASTIC MOLDING MATERIAL METHACRYLATE
MIL-B-44314 Base Document:1987	BODY ARMOR, SMALL ARMS PROTECTIVE, AIRCREWMAN
ASTM F 2025 : 2006 : R2012	Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
MIL M 21649 : C	MOUNT, RESILIENT, TYPE 5M1O,OOO-H
ASTM F 2818:2010	Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ASTM D 3294 : 2015 : REDLINE	Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
ASTM E 1612 : 1994 : R2009	Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM A 975 : 2011	Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
SAE AMS 3644 : 2016	PLASTIC: POLYIMIDE, FOR MOLDED ROD, BAR, AND TUBE, PLAQUE, AND FORMED PARTS
MIL-PRF-1149 Revision D:1998	GASKET MATERIALS, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS
MIL-A-48027 Revision A:1975	ADAPTER-BOOSTER, BOMB, NOSE, THERMALLY PROTECTED, M148E1, LOADING, ASSEMBLING AND PACKING
SAE MA 2007A : 2015	HOSE ASSEMBLY, TETRAFLUOROETHYLENE, LIGHTWEIGHT, 204 DEGREE C, 21000 KPA HYDRAULIC, METRIC
MIL-A-47040 Base Document:1974	ADHESIVE-SEALANT, SILICONE, RTV, HIGH TEMPERATURE
MIL I 82736 : A	IGNITION PELLETS, MAGNESIUM-FLUOROCARBON
15/30314236 DC : 0	BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
04/19975667 DC : 0	BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - SINGLE - USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANCE OXYGENATION
MIL DTL 85548 : C	PROPELLANT, CAST COMPOSITE, N-60
07/30150249 DC : 0	BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-B-63454 Base Document:1982	BAND, ROTATING, NYLON GLASS FILLED PROJECTILE, 105 MM, M737 TDPS-T
MIL-P-63462 Base Document:1979	PLASTIC MOLDING AND EXTRUSION MATERIAL, ETHYL CELLULOSE, FOR ROCKET GRAIN INHIBITING MATERIALS
MIL-M-63304 Revision A:1987	MINE, ANTI-PERSONNEL: HE, M74 LOADING, ASSEMBLING AND PACKING
MIL C 882 : E	CLOTH, DUCK, COTTON OR COTTON POLYESTER BLEND, SYNTHETIC RUBBER,IMPREGNATED, LAMINATED, OIL RESISTANT
MIL-R-8791 Revision D:1982	RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN
ASTM F 1837M : 1997 : R2007	Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
MIL-C-50062 Revision D:1964	CARRIER, FIELD PROTECTIVE MASK, M15
MIL-M-63456 Revision A:1988	MINE, ANTI-PERSONNEL: HE, BLU-92/B LOADING, ASSEMBLING AND PACKING
MIL-A-82842 Base Document:1983	ADHESIVE, CONDUCTIVE, LOW RESISTIVITY
ASTM D 4474 : 2000	Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)
ASTM D 4635 : 2016 : REDLINE	Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
MIL-DTL-45301 Revision E:1998	TREAD ELASTOMER: SOLID TIRE, FOR TRACK LAYING VEHICLES
MIL-DTL-83420 Revision P:2017	WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
L-T-790 Revision B:1976	TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE)
ASTM F 2468 : 2005	Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
MIL-PRF-6855 Revision F:2009	RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR
MIL-C-14505 Revision D:1983	CLOTH, NYLON, POLYCHLOROPRENE-COATED (FOR PNEUMATIC FLOATING EQUIPMENT)
MIL-P-46184 Base Document:1982	PLASTIC MOLDING & EXTRUSION MATERIAL, POLYETHERIMIDE (PEI)
L-P-389 Revision A:1964	PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION
SAE AS 5258 : 2012	INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR
ZZ-T-831 Revision D:1978	TUBING, RUBBER AND PLASTIC
ASTM A 974 : 1997	Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
SAE AMS 2980/1 : 2014	CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS
SAE AMS DTL 23053 : 1999	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
API 17U : 2015	RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT
A-A-56021 Base Document:1991	PLASTIC SHEET, POLYETHYLENE, TEREPHTHALATE (FOR CARTOGRAPHIC OPERATIONS)
ASTM F 624 : 2009 : R2015 : EDT 1	Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
MIL-R-47211 Revision A:1989	RUBBER, SILICONE, ROOM TEMPERATURE CURING
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014	CONDUIT, TUBING, AND CABLE FITTINGS
ASTM F 2025 : 2006	Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
SAE AMS 3660 : 2011	POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS, GENERAL PURPOSE GRADE, AS SINTERED
SAE AMS 3661 : 2015	POLYTETRAFLUOROETHYLENE (PTFE) FILM, PREMIUM GRADE
SAE AMS 3914A : 2015	ADVANCED COMPOSITES PREPREG - NOMINAL 250 DEGREES F CURE - 12K TOW CARBON FIBER AND EPOXY RESIN, PLAIN WEAVE FABRIC
NACE SP 01 85 : 2007	EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE
ASTM D 5961/D5961M : 2017 : REDLINE	Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 706 : 2015 : REDLINE	Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
API TR 17TR8 : 2018	HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
ASTM F 790 : 2008 : R2013	Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
SAE AMS 3207 : 2014	CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 25 - 35
SAE AMS3617F : 2014	POLYAMIDE TYPE 6-6, PLASTIC MOLDINGS AND EXTRUSIONS
ASTM D 7248/D7248M : 2012	Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM E 1612/E1612M : 1994 : R2013 : EDT 1	Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM F 2881/F2881M : 2018	Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 6248 : 1998 : R2012 : EDT 1	Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021)
ASTM D 3089 : 1997 : R2008	Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM F 1092 : 2014 : REDLINE	Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
ASTM D 5577 : 1994 : R2010 : EDT 1	Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019)
ASTM D 6856 : 2003	Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials
ASTM D 3981 : 2009	Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM F 2953 : 2012	Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
ASTM D 5687/D5687M : 1995 : R2007	Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
ASTM F 2160 : 2016	Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM D 1710 : 2015 : REDLINE	Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
ASTM D 8033 : 2016	Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
ASTM F 2896 : 2011	Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
ASTM D 6388 : 1999 : R2005	Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
ASTM D 3369 : 2001	Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006)
ASTM F 3131 : 2014	Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
ASTM E 1783/E1783M : 1996 : R2013 : EDT 1	Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM D 2447 : 2003	Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)
ASTM D 5514 : 2006 : R2011	Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM D 7211 : 2013-05	SPECIFICATION FOR PARTS MACHINED FROM POLYCHLOROTRIFLUOROETHYLENE (PCTFE) AND INTENDED FOR GENERAL USE
ASTM D 6388:1999	Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
ASTM D 6415/D6415M : 2006	Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 6415/D6415M : 2006 : REV A : R2013	Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 7774 : 2017 : REDLINE	Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D 1675 : 2003	Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D 1895 : 2017 : REDLINE	Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM D 7791 : 2017 : REDLINE	Standard Test Method for Uniaxial Fatigue Properties of Plastics

Standards Referencing This Book - (Show below) - (Hide below)

ASTM E 1 : 2014 : REDLINE	Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM D 618 : 2013 : REDLINE	Standard Practice for Conditioning Plastics for Testing
IEEE/ASTM SI_10-2010	American National Standard for Metric Practice
ASTM D 6436 : 2014 : REDLINE	Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
ASTM E 12 : 1970 : R1991 : EDT 1	Terminology Relating to Density and Specific Gravity of Solids, Liquids, and Gases (Withdrawn 1996)

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account