Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-02-2018

Publisher

American Society for Testing and Materials

1.1 This test method covers an instrumental method for the CIE (Commission International de l’Eclairage) tristimulus measurement of the color of maleic anhydride melt before and after prolonged heating under specified conditions of time and temperature. The measurement is converted to color values in the platinum-cobalt system. 1.2 This test method covers the range 0 to100 Pt-Co color. 1.3 In determining the conformance of the test results usingthis method to applicable specification, resultsshall be roundedin accordance with the rounding off methods of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 7, 10.3, and 10.6. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee

1.2This test method covers the range 0 to100 Pt-Co color.

1.3In determining the conformance of the test results using this method to applicable specification, results shall be rounded in accordance with the rounding off methods of Practice E29.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 7, 10.3, and 10.6.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 16
DocumentType	Test Method
Pages	4
PublisherName	American Society for Testing and Materials
Status	Current

ASTM D 3438 : 2015	Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM D 6809 : 2002 : R2016	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 6809 : 2020	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM E 29 : 2013 : R2019	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 8005 : 2018	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 1209 : 2000	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 5386 : 2004	Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM E 29 : 2002	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM E 179 : 2017	Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3438 : 2007	Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM D 1686 : 2019	Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM E 691 : 2019 : EDT 1	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM D 8005 : 2015	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 6809 : 2002 : R2012	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM E 691 : 2022	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2009	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 179 : 2017 : R2022	Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 1209 : 2005 : EDT 1	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 8005 : 2023	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 5386 : 2005	Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D 3438 : 2010	Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM D 3438 : 2019	Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM E 691 : 2021	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 5386 : 1993 : REV B : R2000 : EDT 1	Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM E 308 : 2018	Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM D 6809 : 2002	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 1686 : 2010	Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM E 313 : 1998	Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM D 1686 : 1996	Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D 1209 : 2005 : R2011	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 5386 : 2016	Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM E 308 : 2022	Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM D 1686 : 1996 : R2004	Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D 6809 : 2002 : R2007	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 1209 : 2005	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 3438 : 1999	Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM D 5386 : 2010	Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D 1686 : 1996 : R2000	Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D 1209 : 2005 : R2019	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM E 29 : 2022	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications