We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • ASTM D 93 : 2016-07

    NA Status of Standard is Unknown
    Add to Watchlist
    This Standard has been added successfully to your Watchlist
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You have already added this standard to your Watchlist.
    Visit My Watchlist to view the full list.

    TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER

    Available format(s): 

    Language(s): 

    Published date:  01-07-2016

    Publisher:  American Society for Testing and Materials

    Add to Watchlist

    Sorry this product is not available in your region.

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 05.01, 2016 Defines the determination of the flash point of petroleum products in the temperature range from 40 degrees C to 370 degrees C by a manual Pensky-Martens closed-cup apparatus or an automated Pensky-Martens closed-cup apparatus, and the determination of the flash point of biodiesel in the temperature range of 60 degrees C to 190 degrees C by an automated Pensky-Martens closed cup apparatus.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status NA

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 7665 : 2017 : REDLINE Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
    DEFSTAN 91-38/1(1978) : 1978 PETROLATUM, TECHNICAL JOINT SERVICE DESIGNATION: PX-6 PETROLATUM, TECHNICAL NATO CODE NO: S-743 JOINT SERVICE DESIGNATION: PX-7
    ASTM D 3955 : 2013 : REDLINE Standard Specification for Electrical Insulating Varnishes
    ASTM D 3205 : 1986 : R1991 Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer (Withdrawn 2000)
    ANSI Z400.1/Z129.1 : 2010 HAZARDOUS WORKPLACE CHEMICALS - HAZARD EVALUATION AND SAFETY DATA SHEET AND PRECAUTIONARY LABELING PREPARATION
    MIL PRF 62218 : B CORROSION PREVENTIVE COMPOUNDS, COLD APPLICATION (FOR NEW AND FIELD MOTOR VEHICLES AND TRAILERS)
    MIL PRF 24596 : B COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT
    NBR 16030 : 2012 NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE - DISCONTINUITIES DETECTION
    NFPA 321 : 1991 BASIC CLASSIFICATION OF FLAMMABLE AND COMBUSTIBLE LIQUIDS
    ASTM D 7468 : 2016 : REDLINE TEST METHOD FOR CUMMINS ISM TEST
    API RP 754 : 2016 PROCESS SAFETY PERFORMANCE INDICATORS FOR THE REFINING AND PETROCHEMICAL INDUSTRIES
    CSA Z752 : 2003 : R2013 DEFINITION OF HOUSEHOLD HAZARDOUS WASTE
    AASHTO TP 102 : 2012 : R2015 METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS)
    BS PD CEN/TR 15138 : 2005 PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING
    DOD P 24648 : 0 PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC)
    MIL PRF 16884 : K FUEL, NAVAL DISTILLATE
    CSA Z201 : 0 QUALIFICATION CODE FOR ONTARIO FOR LABORATORIES ANALYZING INDUSTRIAL WASTE
    DEFSTAN 91-86/4(2002) : 2002 TURBINE FUEL, AVIATION KEROSENE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII
    17/30352715 DC : 0 BS IEC 60086-6 ED 1.0 - PRIMARY BATTERIES - PART 6: GUIDANCE ON ENVIRONMENTAL ASPECTS
    SAE J 183 : 2017 ENGINE OIL PERFORMANCE AND ENGINE SERVICE CLASSIFICATION (OTHER THAN 'ENERGY CONSERVING')
    MIL C 83873 : A CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE)
    ASTM D 8125 : 2017 Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
    ASTM D 3941 : 2015-02 TEST METHOD FOR FLASH POINT BY THE EQUILIBRIUM METHOD WITH A CLOSED-CUP APPARATUS
    ASTM D 6217 : 2011 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    DOD E 18214 : B ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC)
    DIN EN 16900 E : 2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
    DEFSTAN 91-86/6(2009) : 2009 TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JSD: AVCAT/FSII
    ASTM D 4865 : 2009 : R2014 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
    DOD E 1265 : D ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC
    TT C 001951 : 0 COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE
    ASTM D 6217 : 2011 : R2016 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    MIL HDBK 510-1 : A AEROSPACE FUELS CERTIFICATION
    MIL I 85470 : A INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH
    MIL C 83231 : A COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS
    MIL C 10382 : D CORROSION PREVENTIVE, PETROLATUM, SPRAYING APPLICATION: FOR FOOD HANDLING MACHINERY AND EQUIPMENT
    DEFSTAN 91-4/9(2013) : 2013 FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION DIESO F-76
    MIL PRF 32490 : 0 ADDITIVE, LUBRICITY IMPROVER, DIESEL
    MIL DTL 25524 : F TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS)
    API 555 : 2013 PROCESS ANALYZERS
    ASTM D 803 : 2015 : REDLINE Standard Test Methods for Testing Tall Oil
    MIL PRF 12048 : E PETROLEUM TESTING KIT, GROUND FUELS
    MIL DTL 5624 : W TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
    ASTM F 1200 : 1988 : R2004 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
    NBR 10129 : 1987 MATERIAIS PENETRANTES
    MIL PRF 23236 : D COATING SYSTEMS FOR SHIP STRUCTURES
    SAE AMS 1426 : 2016 FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS GLYCOL BASE
    MIL I 24718 : 0 INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING - GENERAL SPECIFICATION FOR
    11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    MIL PRF 6083 : G HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION
    MIL T 83133 : D TURBINE FUELS, AVIATION, KEROSENE TYPES, NATO F-34 (JP-8) AND NATO F-35
    MIL H 6083 : E HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION
    SAE AMS 2644 : 2013 INSPECTION MATERIAL, PENETRANT
    MIL STD 1548 : H INTO - PLANE SERVICING OF FUELS AT COMMERCIAL AIRPORTS
    DOD E 24635 : (1) ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC)
    08/30190684 DC : DRAFT OCT 2008 BS ISO 18436-5 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST
    DOD E 699 : D ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC)
    ASTM F 1200 : 1988 : R1998 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
    DOD E 698 : C ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24)
    MIL PRF 16173 : E CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
    TT S 711 : C STAIN, OIL TYPE, WOOD, INTERIOR
    MIL C 52947 : B COAGULANT, WATER TREATMENT: POLYELECTROLYTE, CATIONIC, LIQUID
    API 3000 : 2014 CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS
    ASTM D 7215 : 2016 : REDLINE Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
    VV F 800 : E FUEL OIL, DIESEL
    A A 59693 : A DIESEL FUEL, BIODIESEL BLEND (B20)
    DEFSTAN 91-21/3(1989) : 1989 LUBRICATING OIL, COMPOUNDED NATO CODE: 0-254 JOINT SERVICE DESIGNATION: OC-160
    MIL PRF 38219 : C TURBINE FUEL, LOW VOLATILITY, JP-7
    MIL PRF 85570 : E CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR
    NFPA 32 : 2016 DRYCLEANING FACILITIES
    MIL DTL 83133 : J TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37)
    13/30279896 DC : 0 BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
    DOD P 24631 : (1) SUPP 1 PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC)
    CSA Z752 : 2003 DEFINITION OF HOUSEHOLD HAZARDOUS WASTE
    NFPA 115 : 2016 LASER FIRE PROTECTION
    MIL D 16791 : G DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC)
    MIL C 85704 : B CLEANING COMPOUND, TURBINE ENGINE GAS PATH
    MMM A 002048 : 0 ADHESIVE FIRE RESISTANT THERMAL INSULATION
    DEFSTAN 91-17/2(1990) : 1990 GREASE, CALCIUM BASE JOINT SERVICE DESIGNATION LG-280
    I.S. EN 16900:2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
    ASTM D 6361 : 1998 Standard Guide for Selecting Cleaning Agents and Processes
    MIL F 24951 : B FUEL OIL RECLAIMED
    NBR 8456 : 1984 POSTES DE EUCALIPTO PRESERVADO PARA REDES DE DISTRIBUICAO DE ENERGIA ELETRICA
    ASTM F 2417 : 2017 : REDLINE Standard Specification for Fire Safety for Candles
    BS ISO 18436-5:2012 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst
    MIL PRF 11090 : K CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT
    SAE J 671 : 2014 VIBRATION DAMPING MATERIALS AND UNDERBODY COATINGS
    DOD E 18210 : B ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC)
    ASTM F 1201 : 1988 : R2004 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
    ASTM F 1201 : 1988 : R1998 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
    ASTM E 502 : 2007 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
    MIL H 5606 : G HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
    ASTM D 88 : 2007 : R2013 Standard Test Method for Saybolt Viscosity
    MIL HDBK 510 : A AEROSPACE FUELS CERTIFICATION
    DOD P 15144 : B PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC)
    MIL T 36385 : C TESTER, FLASH POINT, CLOSED TYPE 115 VOLT, 60 HZ AC
    NEMA RE 2 : 1999 ELECTRICAL INSULATING VARNISH
    DOD P 15146 : B PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC)
    ASTM D 5372 : 2017 : REDLINE Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
    NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
    ASTM D 1859 : 1971 : R2000 Standard Specification for Petroleum Used for Blending with Creosote (Withdrawn 2006)
    MIL T 5624 : R TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5
    MIL PRF 5624 : S TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST
    MIL C 87936 : A CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE
    MIL-DOD-P-24555:1977 PAINT, ALUMINUM, HEAT-RESISTING (650 DEGREE C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC)
    BS EN 16900:2017 (published 2017-03) Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods
    ASTM D 4865 : 2009 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
    15/30325842 DC : 0 BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
    MIL PRF 29602 : A CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET
    MIL PRF 25017 : H INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747)
    ASTM D 2069 : 1991 : R1998 Standard Specification for Marine Fuels (Withdrawn 2003)
    MIL P 82522 : C PROPELLANT, JET ENGINE, T-H DIMER, GRADE RJ-4
    DOD P 24647 : A (2) PAINT, ANTIFOULING, SHIP HULL (METRIC)
    MIL P 15183 : B NOTICE 1 PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC)
    MIL STD 3004 : D QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS
    TT P 1565 : B PAINT, BOOT TOPPING BLACK
    MIL S 53018 : 0 SEALER, WELD THROUGH FOR OVERLAPPING SURFACES
    ASTM D 3730 : 2017 : REDLINE Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
    SAE AIR 81 : 2016 IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS
    BS PD CEN/TR 17103 : 2017 PETROLEUM AND RELATED PRODUCTS - FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION
    MIL I 24092 : D INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS
    SAE AMS 1424 : 2017 FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1
    MIL E 15145 : C ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102
    MIL C 11090 : F (1) CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING
    TT W 568 : E WOOD PRESERVATIVE - CREOSOTE-PETROLEUM SOLUTION
    ASTM F 718 : 2007 Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
    MIL P 87107 : C PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-9 AND JP-10
    PD ISO/TR 11018:2001 Essential oils. General guidance on the determination of flashpoint
    MIL PRF 24951 : B FUEL OIL RECLAIMED
    ASTM D 6894 : 2013 : REDLINE Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
    AASHTO TP 102 : 2012 METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS)
    TT E 490 : E ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE)
    MIL F 46162 : D FUEL, DIESEL, REFEREE GRADE
    VV P 216 : C PENETRATING OIL (FOR LOOSENING FROZEN METALLIC PARTS)
    MIL PRF 81309 : G CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM
    ASTM F 1201 : 1988 : R2016 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
    PPP P 1892 : 0 PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF
    CGSB 2.16 : 1994 WATERLESS HAND CLEANER
    DEFSTAN 91-86/3(2002) : 2002 TURBINE FUEL, AVIATION KEROSENE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII
    MIL T 25524 : D TURBINE FUEL, AVIATION, THERMALLY STABLE
    MIL D 50030 : H DECONTAMINATING AGENT, DS2
    ASTM F 1200 : 1988 : R2010 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
    ASTM D 115 : 2017 : REDLINE Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
    MIL DTL 25576 : E PROPELLANT, ROCKET GRADE KEROSENE
    MIL PRF 5606 : H HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
    SAE J 1510 : 2017 LUBRICANTS FOR TWO-STROKE-CYCLE GASOLINE ENGINES
    DOD P 24655 : 0 PAINT, UNDERWATER HULL, ANTICORROSION (METRIC)
    DOD E 1115 : C ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC
    MIL PRF 38299 : E FLUID, PURGING, FOR PRESERVING FUEL TANKS OF JET AIRCRAFT
    MIL DTL 32353 : A HYDRAULIC & LUBRICATING OIL, SYNTHETIC HYDROCARBON BASE
    O L 172 : A LEATHER DRESSING, VESICANT GAS RESISTANT
    ISO/TR 29662:2009 Petroleum products and other liquids Guidance for flash point testing
    MIL DTL 87107 : E PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-10
    MIL DTL 38219 : D TURBINE FUEL, LOW VOLATILITY, JP-7
    MIL P 22298 : A PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133)
    SAE AMS 1640 : 2011 CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES
    DOD F 87935 : 0 FLUID, MAGNETIC PARTICLE INSPECTION, SUSPENSION MEDIUM (METRIC)
    MIL DTL 16884 : P FUEL, NAVAL DISTILLATE
    MIL PRF 87937 : D CLEANING COMPOUND, AEROSPACE EQUIPMENT
    DOD PRF 24648 : 0 PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC)
    MIL DTL 46162 : E FUEL, DIESEL, REFEREE GRADE
    ASTM D 6763 : 2016 : REDLINE Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
    DEFSTAN 91-86/5(2005) : 2005 TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII
    MIL P 24380 : B PAINT, ANCHOR, CHAIN, SOLVENT TYPE, GLOSS BLACK
    CSA M423 : 1987 : R2016 FIRE RESISTANT HYDRAULIC FLUIDS
    MIL I 25135 : E INSPECTION MATERIALS, PENETRANTS
    MIL C 16173 : E CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION
    MIL C 29602 : 0 CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS
    MIL PRF 85704 : C CLEANING COMPOUND, TURBINE ENGINE GAS PATH
    MIL F 16884 : J FUEL, NAVAL DISTILLATE
    A A 54509 : 0 TESTER, FLASH POINT, CLOSED-TYPE (120 VOLT, 50/60 Hz, AC)
    AASHTO M 133 : 2012 SPECIFICATION FOR PRESERVATIVES AND PRESSURE TREATMENT PROCESSES FOR TIMBER
    MIL PRF 32177 : A CLEANING COMPOUND, NONSKID
    CSA M423 : 1987 : R2011 FIRE RESISTANT HYDRAULIC FLUIDS
    CSA M423 : 1987 : R2007 FIRE RESISTANT HYDRAULIC FLUIDS
    MIL DTL 87173 : C PROPELLANT, PRIMING FLUID ALCM, GRADE PF-1
    ASTM ES 19 : 1991 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration (Withdrawn 1994)
    DEFSTAN 91-44/1(1978) : 1978 LUBRICATING OIL, GENERAL PURPOSE: PETROLEUM, LIGHT NATO CODE NO. 0-134 JOINT SERVICE DESIGNATION: OM-13
    SAE AMS 1374 : 2004 REMOVER, POLYURETHANE/EPOXY PAINT, ALKALINE, HOT-TANK TYPE
    API PUBL 1629 : 1993 GUIDE FOR ASSESSING AND REMEDIATING PETROLEUM HYDROCARBONS IN SOILS
    NFPA 123 : 1999 FIRE PREVENTION AND CONTROL IN UNDERGROUND BITUMINOUS COAL MINES
    DEFSTAN 91-99/1(1994) : INTERIM LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, PETROLEUM - NATO CODE: 0-135 JOINT SERVICE DESIGNATION: OM-11
    NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS
    IEEE C57.154 : 2012 DESIGN, TESTING, AND APPLICATION OF LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS USING HIGH-TEMPERATURE INSULATION SYSTEMS AND OPERATING AT ELEVATED TEMPERATURES
    SAE AMS 1428 : 2017 FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4
    SAE AIR 810 : 2013 DEGRADATION LIMITS OF HYDROCARBON-BASED HYDRAULIC FLUIDS, MIL-PRF-5606, MIL-PRF-83282, AND MIL-PRF-87257 USED IN HYDRAULIC TEST STANDS
    SAE AMS 1435 : 2012 FLUID, GENERIC, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS
    API 13I SPANISH : 1995 PRACTICA RECOMENDADA PROCEDIMIENTO ESTANDAR PARA LAS PRUEBAS DE LABORATORIO CON FLUIDOS DE PEFORACION
    SAE AMS 1536 : 2008 CLEANER FOR AIRCRAFT COMPONENTS COLD TANK TYPE, SOLVENT-BASE
    ASTM D 4712 : 1987 : REV A : R2001 Standard Guide for Testing Industrial Water-Reducible Coatings
    ASTM D 6448 : 2016 : REDLINE Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
    SAE AMS 3160 : 2016 SOLVENT, PETROLEUM
    NFPA 386 : 1990 PORTABLE SHIPPING TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
    ASTM D 6468 : 2008 : R2013 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
    NFPA 49 : 1994 HAZARDOUS CHEMICALS DATA
    SAE AMS 2641 : 2015 VEHICLE, MAGNETIC PARTICLE INSPECTION, PETROLEUM BASE
    ASTM D 6361/D6361M : 1998 : R2010 : EDT 1 Standard Guide for Selecting Cleaning Agents and Processes
    API 1509 : 2002 ENGINE OIL LICENSING AND CERTIFICATION SYSTEM
    UNI/TS 11446 : 2012 PYROLYTIC BIOLIQUIDS - CLASSIFICATION AND SPECIFICATIONS FOR ENERGY USE
    DEFSTAN 91-86/2(1997) : 1997 TURBINE FUEL, AVIATION: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-44 - JOINT SERVICE DESIGNATION: AVCAT/FSII
    QPL 68-251 : ISSUE 1 QPL OF MATERIALS TO DEFENCE STANDARD 68-251 FUEL SOLUBLE PIPELINE CORROSION INHIBITORS/LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS
    ASTM D 7544 : 2012 Standard Specification for Pyrolysis Liquid Biofuel
    SAE AMS 1551 : 2008 CLEANER, TURBINE ENGINE GAS PATH AQUEOUS TYPE
    NFPA 497M : 1991 CLASSIFICATION OF GASES, VAPORS AND DUSTS FOR ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS
    DEFSTAN 91-86/1(1994) : INTERIM TURBINE FUEL, AVIATION, HIGH FLASH TYPE CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII
    UNI ISO 18436-5 : 2013 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST
    NFPA 30 FRENCH : 1996 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
    NFPA 81 : 1986 FUR STORAGE, FUMIGATION AND CLEANING
    ASTM D 3278 : 1996 : R2004 : EDT 1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
    SAE AMS 1539 : 1996 (S2018) CLEANING COMPOUND, TERPENE, CIRCUIT BOARD CLEANER
    ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
    S.R. CEN/TR 17103:2017 FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION
    CGSB 25.1-2 : 1995 METHODS OF SAMPLING AND TESTING WAXES AND POLISHES - FLASH POINT
    ASTM D 8085 : 2017 Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
    ASTM D 6823 : 2008 : R2013 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
    SAE J 357 : 2016 PHYSICAL AND CHEMICAL PROPERTIES OF ENGINE OILS
    SAE J 313 : 2017 DIESEL FUELS
    ASTM C 916 : 2014 : REDLINE Standard Specification for Adhesives for Duct Thermal Insulation
    ASTM D 6618 : 2016 : REDLINE Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
    BS ISO 8178-5:2008 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
    ASTM D 910 : 2017-05 SPECIFICATION FOR LEADED AVIATION GASOLINES
    SAE AMS 1377 : 2012 REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT
    ASTM D 3323 : 1980 : R1988 : EDT 1 Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993)
    NACE SP 04 87 : 2007 CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTIVES AND VAPOR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION
    ASTM D 2932 : 1980 : R1988 : EDT 1 Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993)
    DEFSTAN 68-131/2(2006) : 2006 MINERAL JELLY
    BS 2000-35(1993) : 1993 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF OPEN FLASH AND FIRE POINT - PENSKY-MARTENS METHOD
    NFPA 921 : 2017 GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS
    ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
    ASTM D 6114 : 1997 : EDT 1 Standard Specification for Asphalt-Rubber Binder
    ASTM C 647 : 2008 : R2013 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
    ASTM D 3757 : 2016 : REDLINE Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
    ASTM D 6577 : 2015 : REDLINE Standard Guide for Testing Industrial Protective Coatings
    ASTM D 268 : 2001 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
    ASTM F 1200 : 1988 : R2016 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
    ASTM D 7156 : 2017 : REDLINE Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
    ASTM D 8147 : 2017 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
    ASTM C647 : 2008 GUIDE TO PROPERTIES AND TESTS OF MASTICS AND COATING FINISHES FOR THERMAL INSULATION
    ASTM E 502 : 2007 : EDT 1 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
    ASTM D 7666 : 2012 Standard Specification for Triglyceride Burner Fuel
    ASTM D 333 : 2001 : R2013 Standard Guide for Clear and Pigmented Lacquers
    ASTM F 718 : 2007 : R2017 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
    ASTM D 4712 : 1987 : REV A : R1996 Standard Guide for Testing Industrial Water-Reducible Coatings
    ASTM D 5967 : 2017 : REDLINE Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
    ASTM D 5290 : 1991 Standard Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997)
    ASTM D 268 : 2001 : R2007 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
    ASTM D 6823 : 2008 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
    ASTM D 8046 : 2016 Standard Guide for Pumpability of Heat Transfer Fluids
    ASTM D 8048 : 2017-05 TEST METHOD FOR EVALUATION OF DIESEL ENGINE OILS IN T-13 DIESEL ENGINE
    ASTM E 502 : 2007 : R2013 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
    ASTM D 7467 : 2017-03 SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20)
    ASTM D 7583 : 2016 : REDLINE Standard Test Method for John Deere Coolant Cavitation Test
    ASTM D 6483 : 2004 Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)
    ASTM D 8074 : 2016 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
    ASTM D 7544 : 2012 : R2017 Standard Specification for Pyrolysis Liquid Biofuel
    ASTM D 5177 : 1991 : R1996 Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005)
    ASTM D 5452 : 2012 : REDLINE Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
    ASTM D 4712 : 1987 : REV A : R2005 Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014)
    ASTM D 6681 : 2017 : REDLINE Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
    ASTM D 333 : 2001 Standard Guide for Clear and Pigmented Lacquers
    ASTM D 1655 : 2018-01 SPECIFICATION FOR AVIATION TURBINE FUELS
    ASTM D 2939 : 2003 Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)
    ASTM D 2604 : 1986 : R2000 Standard Specification for High-Boiling Hydrocarbon Solvent for Preparing Oil-Borne Preservative Solutions (Withdrawn 2006)
    ASTM D 4857 : 2012 : REDLINE Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
    ASTM D 6361/D6361M : 1998 : R2015 Standard Guide for Selecting Cleaning Agents and Processes
    ASTM D 6074 : 2015 : REDLINE Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
    ASTM D 88 : 2007 Standard Test Method for Saybolt Viscosity
    ASTM D 6985 : 2004 : REV A Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010)
    DEFSTAN 68-252/3(2005) : 2005 FUEL SYSTEM ICING INHIBITOR NATO CODE: S-1745 JOINT SERVICE DESIGNATION: AL-41
    ASTM F 718 : 2007 : R2011 : EDT 1 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
    ASTM F 2701 : 2008 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash (Withdrawn 2017)
    ASTM C 647 : 2008 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
    ASTM D 6985 : 2004 Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications
    DOD E 700 : A ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC)
    MIL P 85658 : 0 PAINT, WATER DISPLACING
    MIL P 24351 : A PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2)
    NBR NM-342 : 2014 ERRATA 1 2015 NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE - DESCONTINUITIES DETECTION
    DEFSTAN 91-43/2(1993) : 1993 LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330
    I.S. CEN/TR 15138:2005 PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING
    SAE AMS 1548 : 2017 CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE
    ASTM C 461 : 2017 : REDLINE Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
    NFPA 704 : 2017 STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE
    MIL P 52977 : 0 PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE
    ASTM F 1201 : 1988 : R2010 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
    ISO/TR 11018:1997 Essential oils General guidance on the determination of flashpoint
    ASTM D 6468 : 2008 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
    DIN EN 16900 : 2015 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
    ISO 8178-5:2015 Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels
    ISO 18436-5:2012 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 5: Lubricant laboratory technician/analyst
    ASTM D 3278 : 1996 : R2011 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020)
    ASTM D 268 : 2001 : R2012 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021)
    ASTM D 333 : 2001 : R2007 Standard Guide for Clear and Pigmented Lacquers
    ASTM D 3105 : 2017 : REDLINE Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
    ASTM D 6114 : 1997 : R2002 Standard Specification for Asphalt-Rubber Binder
    ASTM D 8175 : 2018 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
    ASTM D 3278 : 1996 : EDT 1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
    ASTM D 7960 : 2018 : REDLINE Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
    ASTM D 1131 : 1997 Standard Test Methods of Testing Rosin Oils (Withdrawn 2003)
    NFPA 1 HDBK : 2015 FIRE CODE HANDBOOK
    NFPA 1 : 2018 FIRE CODE
    GOST 849:2018 Primary nickel. SpecificationsE
    NFPA 90A : 2018 INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS
    NFPA 120 : 2015 FIRE PREVENTION AND CONTROL IN COAL MINES
    NFPA 30 HDBK : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE HANDBOOK
    MIL-DTL-83133K:2018 TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37)
    NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
    NFPA 30A : 2018 MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES
    NFPA 122 : 2015 FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES
    NFPA 35 : 2016 MANUFACTURE OF ORGANIC COATINGS
    NFPA 90B : 2018 INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS
    NFPA 33 : 2018 SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS
    NFPA 34 : 2018 DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS
    BS EN ISO 8178-5 : 1997 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS
    UL 1993 : 5 SELF-BALLASTED LAMPS AND LAMP ADAPTERS
    ASTM D 6813 : 2002 : REV A : R2007 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
    ICC 2012 INTERNATIONAL FIRE CODE : 2012 INTERNATIONAL FIRE CODE
    ASTM D 6813 : 2002 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
    ICC IMC Code and Commentary : 2015 IMC® Code and Commentary
    C22.2 NO. 1993-17 Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993)
    ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 IFC® Code and Commentary
    ASTM D 6813 : 2002 : REV A : R2013 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015)
    CSA B139 : 2015 INSTALLATION CODE FOR OIL-BURNING EQUIPMENT
    ASTM D 6813 : 2002 : REV A Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
    ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
    ASHRAE 26 : 2010 MECHANICAL REFRIGERATION AND AIR-CONDITIONING INSTALLATIONS ABOARD SHIP
    I.S. EN ISO 8178-5:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
    NFPA 1 : 2021 FIRE CODE
    NFPA 99C : 2005 GAS AND VACUUM SYSTEMS
    ASME B31.5 : 2016 REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS
    CEN/TR 15138 : 2005 PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING
    ICC 2015 INT. SOLAR ENERGY PRO. & COMM. : 2015 2015 (ISEP[TM]) INTERNATIONAL SOLAR ENERGY PROVISIONS[TM] COMMENTARY
    CEN/TR 17103 : 2017 PETROLEUM AND RELATED PRODUCTS - FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION
    ICC 2012 INTERNATIONAL MECH. CODE : 2012 INTERNATIONAL MECHANICAL CODE
    EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
    EN ISO 8178-5 : 1997 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 1 : 2014 : REDLINE Standard Specification for ASTM Liquid-in-Glass Thermometers
    ISO Guide 35:2017 Reference materials Guidance for characterization and assessment of homogeneity and stability
    ASTM E 502 : 2007 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
    ASTM D 3941 : 2015-02 TEST METHOD FOR FLASH POINT BY THE EQUILIBRIUM METHOD WITH A CLOSED-CUP APPARATUS
    ISO Guide 34:2009 General requirements for the competence of reference material producers
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective