Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

13-03-2020

Publisher

American Society for Testing and Materials

1.1Included in this practice are methods covering the determination of the amount of bending that occurs during the application of tensile and compressive forces to notched and unnotched test specimens during routine testing in the elastic range. These methods are particularly applicable to the force levels normally used for tension testing, compression testing, creep testing, and uniaxial fatigue testing. The principal objective of this practice is to assess the amount of bending exerted upon a test specimen by the ordinary components assembled into a materials testing machine, during routine tests.

1.2This practice is valid for metallic and nonmetallic testing.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	E 28
DocumentType	Standard Practice
Pages	17
ProductNote	THIS STANDARD IS ALSO REFERS TO VAMAS Guide 42
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM E 1012 : 2014 : EDT 1

ASTM C 1275 : 2018	Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM F 1160 : 2014 : R2017 : EDT 1	Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM E 2789 : 2010 : R2015	Standard Guide for Fretting Fatigue Testing
ASTM C 1360 : 2017	Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C 1819 : 2015	Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM B 557 : 2015	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM D 7337/D7337M : 2012 : R2019	Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 364/C364M : 2016	Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM E 2714 : 2013	Standard Test Method for Creep-Fatigue Testing
ASTM C 1337 : 2017	Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM D 3552 : 2017	Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D 638 : 2014	Standard Test Method for Tensile Properties of Plastics
ASTM E 466 : 2015	Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM C 1366 : 2019	Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM D 3479/D3479M : 2019	Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D 7205/D7205M : 2006 : R2016	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 1361 : 2010 : R2019	Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM D 3039/D3039M : 2017	Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM C 1863 : 2018	Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
ASTM C 1869 : 2018	Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
ASTM E 74 : 2018 : EDT 1	Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM C 1773 : 2017	Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM E 328 : 2013	Standard Test Methods for Stress Relaxation Tests for Materials and Structures
ASTM C 1291 : 2018	Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM C 1468 : 2019 : REV A	Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM E 132 : 2017	Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM C 1359 : 2018 : EDT 1	Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
ASTM C 1862 : 2017	Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
ASTM C 1273 : 2018	Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM E 2899 : 2019	Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E 1450 : 2016	Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 647 : 2015 : EDT 1	Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E 143 : 2013	Standard Test Method for Shear Modulus at Room Temperature
ASTM E 8/E8M : 2016 : REV A : EDT 1	Standard Test Methods for Tension Testing of Metallic Materials
ASTM D 7913/D7913M : 2014 : R2020	Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM E 139 : 2011 : R2018	Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM D 7291/D7291M : 2015	Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM F 1801 : 1997 : R2014	Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM E 1856 : 2013	Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM C 1424 : 2015 : R2019	Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM C 394/C394M : 2016	Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM E 2368 : 2010 : R2017	Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 111 : 2017	Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM C 1358 : 2018	Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
ASTM E 2207 : 2015	Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM B 557M : 2015	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

ASTM E 8/E8M : 2024	Standard Test Methods for Tension Testing of Metallic Materials
AS 1391:2020	Metallic materials - Tensile testing - Method of test at room temperature
ASTM E 83 : 2023	Standard Practice for Verification and Classification of Extensometer Systems
ASTM E 83 : 2000 : EDT 1	Standard Practice for Verification and Classification of Extensometer
ASTM E 606 : 1992 : R1998	Standard Practice for Strain-Controlled Fatigue Testing
ASTM E 8/E8M : 2021	Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 83 : 2016	Standard Practice for Verification and Classification of Extensometer Systems
ASTM E 83 : 1998 : EDT 1	Standard Practice for Verification and Classification of Extensometer
ASTM E 21 : 2020	Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E 6 : 2002	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 466 : 1996	Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 8/E8M : 2022	Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 466 : 2021	Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 6 : 2015 : EDT 3	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023 : REV A	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 9 : 1989 : REV A : R1995	Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E 6 : 2015 : EDT 4 : REDLINE	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2015 : EDT 4	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023	Standard Terminology Relating to Methods of Mechanical Testing