Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 1613 : 2012

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
Available format(s)

Hardcopy , PDF

Withdrawn date

21-01-2021

Language(s)

English

Published date

15-05-2019

This test method is intended for use with extracted or digested samples that were collected during the assessment, management, or abatement of lead hazards from buildings, structures, or other locations.

1.1 This test method is intended for use with extracted or digested samples that were collected during the assessment, management, or abatement of lead hazards from buildings, structures, or other locations.

1.2 This test method covers the lead analysis of sample extracts or digestates (for example, extracted or digested paint, soil, dust, and airborne particulate) using inductively coupled plasma atomic emission spectrometry (ICP-AES), flame atomic absorption spectrometry (FAAS), or graphite furnace atomic absorption spectrometry (GFAAS).

1.3 This test method contains directions for sample analysis, as well as quality assurance (QA) and quality control (QC), and may be used for purposes of laboratory accreditation and certification.

1.4 No detailed operating instructions are provided because of differences among various makes and models of suitable instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This practice contains notes which are explanatory and not part of the mandatory requirements of this standard.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 22
DocumentType
Test Method
Pages
9
PublisherName
American Society for Testing and Materials
Status
Withdrawn
Supersedes

ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings
ASTM E 1792 : 2003 : R2016 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 7439 : 2014 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM E 1728 : 2016 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM D 7659 : 2010 : R2015 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
ASTM E 3193 : 2019 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
ASTM E 1979 : 2017 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 2914/E2914M : 2019 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
ASTM E 2913/E2913M : 2019 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
ASTM E 1727 : 2016 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM D 7035 : 2016 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 1583 : 2017 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
ASTM F 2999 : 2014 Standard Consumer Safety Specification for Adult Jewelry
ASTM E 1729 : 2016 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
ASTM D 1356 : 2017 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM E 2115 : 2015 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 1644 : 2017 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 631 : 2015 Standard Terminology of Building Constructions
ASTM D 7707 : 2011 : R2016 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
ASTM E 1775 : 2016 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E 2119 : 2016 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
ASTM E 3203 : 2019 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM F 2923 : 2014 Standard Specification for Consumer Product Safety for Children’s Jewelry
ASTM F 2223 : 2019 Standard Guide for ASTM Standards on Playground Surfacing
ASTM F 3012 : 2014 Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
ASTM F 2765 : 2014 Standard Specification for Total Lead Content in Synthetic Turf Fibers

ASTM E 1792 : 2003 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 4840 : 1999 : R2018 : EDT 1 Standard Guide for Sample Chain-of-Custody Procedures
ASTM E 1775 : 2001 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E 1792 : 2003 : R2011 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1792 : 2001 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1726 : 2001 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 1792 : 2003 : R2016 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 3919 : 2015 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 4840 : 1999 Standard Guide for Sampling Chain-of-Custody Procedures
ASTM E 1188 : 2005 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1645 : 2001 : R2007 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 1775 : 2016 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM D 3919 : 2004 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM E 1188 : 1995 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1644 : 2004 : R2012 : EDT 1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1644 : 2017 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1979 : 2004 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1645 : 1994 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D 7144 : 2005 : REV A : R2011 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM D 6785 : 2013 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1729 : 1999 Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E 1864 : 1997 Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
ASTM D 6785 : 2002 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1605 : 2001 : REV B Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 1999 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM E 1741 : 2000 Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry (Withdrawn 2009)
ASTM D 6785 : 2008 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1645 : 2016 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 1645 : 2001 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 1727 : 2005 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014)
ASTM E 2239 : 2012 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1979 : 2012 : R2016 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1726 : 2001 : R2009 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 1729 : 2004 Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM E 1864 : 2002 Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011)
ASTM E 2239 : 2012 : R2016 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1605 : 2000 Standard Terminology Relating to Lead in Buildings
ASTM E 1729 : 2016 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
ASTM E 1728 : 2016 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1605 : 2018 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2018 : REV A Standard Terminology Relating to Lead in Buildings
ASTM E 1727 : 1999 Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E 1979 : 2017 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1605 : 2001 : REV A Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 2002 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1792 : 2002 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1188 : 2011 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1729 : 2005 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination (Withdrawn 2014)
ASTM E 1979 : 2012 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM D 3919 : 2008 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM E 1605 : 2003 : EDT 1 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2019 Standard Terminology Relating to Lead in Buildings
ASTM D 4697 : 1995 : R2001 Standard Guide for Maintaining Test Methods in the User's Laboratory (Withdrawn 2009)
ASTM E 1728 : 2010 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1775 : 2007 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E 1605 : 2003 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings
ASTM E 2239 : 2003 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1792 : 2001 : EDT 1 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 3919 : 1999 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM E 1605 : 2004 Standard Terminology Relating to Lead in Buildings
ASTM E 1644 : 2004 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM E 1188 : 2011 : R2017 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1727 : 2004 Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM E 1979 : 1998 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1775 : 1996 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E 2239 : 2004 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1644 : 1998 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1726 : 2016 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 4210 : 1989 : R1996 : EDT 1 Standard Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data (Withdrawn 2002)
ASTM E 1775 : 2007 : R2016 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E 1792 : 1996 : REV A Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1605 : 2001 Standard Terminology Relating to Lead in Buildings
ASTM E 1726 : 1995 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 1644 : 2004 : R2016 : EDT 1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM E 1605 : 2004 : R2012 Standard Terminology Relating to Lead in Buildings
ASTM E 1727 : 2016 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM D 7144 : 2005 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM E 1605 : 2002 Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 2003 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM D 7144 : 2005 : REV A Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM D 7144 : 2005 : REV A : R2016 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM D 4697 : 1995 Standard Guide for Maintaining Test Methods in the User's Laboratory
ASTM E 1645 : 2001 : R2016 : EDT 1 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 2239 : 2002 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities

View more information
$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more