ASTM E 1775 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
Available format(s)
Hardcopy , PDF
Superseded date
26-09-2020
Language(s)
English
Published date
01-03-2016
This guide provides guidelines for determining the performance of field-portable quantitative lead analysis instruments.
1.1This guide provides guidelines for determining the performance of field-portable quantitative lead analysis instruments.
1.2This guide applies to field-portable electroanalytical and spectrophotometric (including reflectance and colorimetric) analyzers.
1.3Sample matrices of concern herein include paint, dust, soil, and airborne particles.
1.4This guide addresses the desired performance characteristics of field-based sample extraction procedures for lead, as well as on-site extraction followed by field-portable analysis.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 22
|
| DocumentType |
Guide
|
| Pages |
3
|
| ProductNote |
THIS STANDARD ALSO REFERS TO- EPA 600/R-93/200
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM E 1979 : 2017 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
| ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1792 : 2001 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1726 : 2001 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 7035 : 2016 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM E 1645 : 2001 : R2007 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM D 6966 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
| ASTM E 1644 : 2004 : R2012 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
| ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM E 1645 : 1994 | Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM D 7144 : 2005 : REV A : R2011 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM D 7035 : 2010 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM E 1864 : 1997 | Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures |
| ASTM D 6785 : 2002 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1605 : 2001 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM D 6785 : 2008 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1645 : 2016 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1645 : 2001 | Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM D 6966 : 2008 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
| ASTM E 1726 : 2001 : R2009 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 7439 : 2008 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma<span class='unicode'>–</span>Mass Spectrometry |
| ASTM E 1864 : 2002 | Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011) |
| ASTM D 5438 : 2000 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM E 1605 : 2000 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1605 : 2018 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1605 : 2018 : REV A | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1613 : 1999 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| ASTM E 1605 : 2001 : REV A | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1792 : 2002 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1605 : 2003 : EDT 1 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 5438 : 2005 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 7439 : 2014 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
| ASTM D 6966 : 2003 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
| ASTM D 5438 : 2017 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM E 1605 : 2003 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1613 : 2004 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| ASTM E 1605 : 2018 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1792 : 2001 : EDT 1 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1644 : 2004 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 5438 : 2011 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM E 1644 : 1998 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM E 1726 : 2016 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1792 : 1996 : REV A | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1605 : 2001 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1726 : 1995 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1644 : 2004 : R2016 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 7035 : 2004 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 7144 : 2005 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 6966 : 2013 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
| ASTM E 1605 : 2002 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 7144 : 2005 : REV A | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 7144 : 2005 : REV A : R2016 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM E 1645 : 2001 : R2016 : EDT 1 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
$108.03
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.