ASTM E 1777 : 2009 : R2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Prioritization of Data Needs for Pavement Management
Available format(s)
Hardcopy , PDF
Superseded date
10-12-2019
Language(s)
English
Published date
01-05-2015
CONTAINED IN VOL. 04.03, 2015 Specifies data needs for pavement management systems.
1.1This guide identifies data needs for pavement management systems. It also addresses the relative importance of various types of pavement data.
1.2This guide was developed for use by federal, state, and local agencies, as well as consultants who provide services to those agencies.
1.3This guide describes a process and provides a set of recommendations that any agency may use to develop a plan for acquiring pavement management data. Any individual agency may justifiably assign higher or lower priority to specified data items depending on their needs and policy.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
E 17
|
| DocumentType |
Guide
|
| Pages |
10
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM E 1605 : 2018 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM D 4602 : 1993 : R2015 | Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment |
| ASTM E 1337 : 1990 : R2018 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire |
| ASTM D 4694 : 2009 | Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device |
| ASTM E 1166 : 2000 : R2009 | Standard Guide for Network Level Pavement Management |
| ASTM D 6433 : 2011 | Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys |
| ASTM E 1215 : 1993 : R2012 | Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness |
| ASTM D 6433 : 2016 | Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys |
| ASTM D 5340 : 1998 | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM E 1926 : 2008 : R2015 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
| ASTM E 1215 : 1993 : R1998 | Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness |
| ASTM E 1337 : 1990 : R1996 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire |
| ASTM D 6433 : 2003 | Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys |
| ASTM D 5340 : 2009 | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM E 1215 : 1993 : R2007 | Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness |
| ASTM D 4602 : 1993 : R2002 | Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment |
| FAA AC 150/5320-6 : 0 | AIRPORT PAVEMENT DESIGN AND EVALUATION |
| ASTM E 1274 : 2003 : R2008 | Standard Test Method for Measuring Pavement Roughness Using a Profilograph |
| ASTM D 4748 : 1998 | Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar |
| ASTM E 1166 : 2000 : R2015 | Standard Guide for Network Level Pavement Management |
| ASTM D 5340 : 2003 | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM E 445/E445M : 2015 : REDLINE | Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires |
| ASTM D 6433 : 2018 | Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys |
| ASTM D 4694 : 2009 : R2015 | Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device |
| ASTM E 1274 : 2003 | Standard Test Method for Measuring Pavement Roughness Using a Profilograph |
| ASTM D 5340 : 2009 : REV A | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM D 4695 : 2003 : R2015 | Standard Guide for General Pavement Deflection Measurements |
| ASTM D 3319 : 2011 : R2017 | Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel |
| ASTM E 1274 : 2018 | Standard Test Method for Measuring Pavement Roughness Using a Profilograph |
| ASTM E 950 : 1998 | Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference |
| ASTM E 1926 : 2008 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
| ASTM E 1911 : 2009 : REV A | Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester |
| ASTM E 1215 : 1993 : R2003 | Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness |
| ASTM E 1170 : 1997 : R2001 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM E 1337 : 1990 : R2008 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire |
| ASTM D 3319 : 2000 | Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel |
| ASTM E 1170 : 1997 : R2006 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM D 4748 : 2010 | Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar |
| ASTM E 1082 : 1990 : R2002 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 5340 : 2012 | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM E 1170 : 1997 : R2017 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM E 1082 : 1990 : R2007 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 4695 : 2003 | Standard Guide for General Pavement Deflection Measurements |
| ASTM E 1170 : 1997 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM D 4748 : 2010 : R2015 | Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar |
| ASTM E 1274 : 1988 : R1993 : EDT 1 | Standard Test Method for Measuring Pavement Roughness Using a Profilograph (Withdrawn 2002) |
| AASHTO GDPS 4 : 0 | GUIDE FOR DESIGN OF PAVEMENT STRUCTURES |
| ASTM D 4123 : 1982 : R1995 | Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003) |
| ASTM E 965 : 2015 | Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique |
| ASTM E 1926 : 1998 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
| ASTM D 5340 : 2012 : R2018 | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM E 1166 : 2000 : R2005 | Standard Guide for Network Level Pavement Management |
| ASTM D 4694 : 1996 | Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device |
| ASTM D 4748 : 2006 | Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar |
| ASTM D 4694 : 1996 : R2003 | Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device |
| ASTM E 1911 : 1998 | Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester |
| ASTM E 1911 : 2009 : REV A : EDT 1 | Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester (Withdrawn 2018) |
| ASTM D 5340 : 2004 | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM E 1337 : 1990 : R2002 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire |
| ASTM E 1166 : 20001 | Standard Guide for Network Level Pavement Management |
| ASTM E 1082 : 1990 : R1995 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 6433 : 2007 | Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys |
| ASTM D 3319 : 2006 | Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel |
| ASTM D 6433 : 1999 | Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys |
| ASTM E 1215 : 1993 : R2017 | Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness |
| ASTM E 1274 : 2003 : R2012 | Standard Test Method for Measuring Pavement Roughness Using a Profilograph |
| ASTM D 4695 : 2003 : R2008 | Standard Guide for General Pavement Deflection Measurements |
| ASTM E 1911 : 2019 | Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester |
| ASTM D 4602 : 1993 : EDT 1 | Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment |
| ASTM D 4602 : 1993 : R2008 | Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment |
| ASTM E 1170 : 1997 : R2007 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM E 1274 : 2003 : R2017 | Standard Test Method for Measuring Pavement Roughness Using a Profilograph |
| ASTM E 1082 : 1990 : R2012 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 4695 : 1996 | Standard Guide for General Pavement Deflection Measurements |
| ASTM D 5340 : 2011 | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM D 5340 : 2010 | Standard Test Method for Airport Pavement Condition Index Surveys |
| ASTM E 1911 : 2007 | Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester |
| ASTM E 770 : 1980 : R1985 : EDT 1 | Method for Classifying Pavement Surface Textures |
| ASTM D 6433 : 2009 | Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys |
| ASTM E 1170 : 1997 : R2012 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM E 1082 : 1990 : R2017 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM E 1337 : 1990 : R2012 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire |
| ASTM D 3319 : 2011 | Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel |
| ASTM E 274 : 2006 | Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire |
$122.77
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.