Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 1797 : 2012 : R2017 : EDT 1

Current
Current

The latest, up-to-date edition.

Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-10-2017

CONTAINED IN VOL. 04.11, 2017 Specifies minimum material performance requirements and laboratory test procedures for reinforced liquid coating encapsulation products (single- or multiple-coat systems) for leaded paint in buildings.

1.1This specification covers minimum material performance requirements and laboratory test procedures for reinforced liquid coating encapsulation products (single- or multiple-coat systems) for leaded paint in buildings. Performance properties addressed in this specification are:

1.1.1Impact Resistance,

1.1.2Adhesion,

1.1.3Dry Abrasion Resistance,

1.1.4Water Vapor Transmission,

1.1.5Water and Chemical Resistance,

1.1.6Surface Burning Characteristics,

1.1.7Volatile Organic Compound (VOC) Content,

1.1.8Weathering,

1.1.9Aging,

1.1.10Scrub Resistance,

1.1.11Mildew Resistance,

1.1.12Paintability/Repairability,

1.2This specification does not address the selection of an encapsulation product for specific use conditions. Specific use conditions may require performance values other than those stated in this specification. See Guide E1796 for guidance.

1.3This specification complements Specification E1795 for non-reinforced liquid coating encapsulation products.

1.4This specification does not cover the use of encapsulation products on industrial steel structures nor residential exterior coated metal surfaces because no corrosion control requirements are included.

1.5This specification applies to any liquid-applied product incorporating reinforcement materials as part of the system. Reinforcement materials are continuous fabric or mesh and are applied in the field. These materials are typically applied between a base and top coat. These products are used to encapsulate a leaded paint surface with the intent of reducing human exposure to lead in paint.

1.6The results of the test methods included in this specification will not necessarily predict field performance.

1.7The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 22
DevelopmentNote
Supersedes ASTM PS 41 (12/2001)
DocumentType
Standard
Pages
6
ProductNote
Reconfirmed EDT 1
PublisherName
American Society for Testing and Materials
Status
Current

ASTM E 2252 : 2018 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
ASTM E 1795 : 2017 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E 1796 : 2003 : R2016 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

ASTM D 3960 : 2005 : R2018 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM E 2239 : 2020 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1605 : 2022 Standard Terminology Relating to Lead in Buildings
ASTM D 1212 : 1991 : R2013 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 1005 : 1995 : R2020 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 4414 : 1995 : R2020 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D 3924 : 2016 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
ASTM E 1796 : 1997 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E 84 : 2023 : REV D Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 1475 : 2013 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 2486 : 2017 : REDLINE Standard Test Methods for Scrub Resistance of Wall Paints
ASTM E 1795 : 2004 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 1475 : 1998 : R2012 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 3359 : 2009 : EDT 2 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 1653 : 1993 : R1999 : EDT 1 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 3960 : 2002 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 3960 : 2001 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 4541 : 2009 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D 3273 : 2000 : R2005 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM E 84 : 2023 : REV C Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 3273 : 2012 : EDT 1 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM E 1795 : 2017 : REDLINE Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 3274 : 2009 : R2021 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM D 823 : 1995 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
ASTM D 1308 : 2002 : R2013 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 3925 : 1981 : R1985 Standard Practice for Sampling Liquid and Related Pigmented Coatings
ASTM D 3273 : 2012 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3960 : 2005 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 1475 : 1985 Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
ASTM G 154 : 2016 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM D 2794 : 1993 : R2024 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 3925 : 1991 : R1996 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM E 1796 : 2003 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 3273 : 1986 : R1991 : EDT 1 Standard Test Method for Resistance to Growth of Moid on the Surface of Interior Coatings in an Enviormental Chamber
ASTM D 3891 : 2008 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D 3274 : 2009 : R2017 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM D 3960 : 2005 : R2013 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings
ASTM D 7091 : 2022 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 1212 : 1991 : R2007 : EDT 1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 4541 : 2017 : REDLINE Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D 3891 : 2008 : R2014 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D 1212 : 1991 : R2020 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 3359 : 1997 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM E 1796 : 2024 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E 84 : 2023 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 4060 : 2007 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 2794 : 1992 Standard Test Method for Resistence of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM E 1605 : 2001 : REV B Standard Terminology Relating to Lead in Buildings
ASTM D 4541 : 2009 : EDT 1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D 2486 : 2006 Standard Test Methods for Scrub Resistance of Wall Paints
ASTM D 1475 : 1998 : R2003 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM G 154 : 2023 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
ASTM E 84 : 2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 1005 : 1995 : R2001 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM E 1795 : 2017 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E 1795 : 2012 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 16 : 2016 : REDLINE TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS
ASTM E 2239 : 2012 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM D 16 : 2019 Standard Terminology for Paint, Related Coatings, Materials, and Applications
ASTM E 84 : 2022 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 7091 : 2020 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 3274 : 1995 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
ASTM D 2486 : 2017 Standard Test Methods for Scrub Resistance of Wall Paints
ASTM D 3924 : 1980 : R2011 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
ASTM D 4541 : 2002 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D 4414 : 1995 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D 3359 : 2009 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM E 2239 : 2012 : R2016 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1605 : 2000 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2018 Standard Terminology Relating to Lead in Buildings
ASTM D 1653 : 2013 : R2021 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 4060 : 2001 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM E 1605 : 2018 : REV A Standard Terminology Relating to Lead in Buildings
ASTM D 3359 : 2022 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 3924 : 1980 : R2005 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
ASTM E 84 : 2020 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 1475 : 1960 : R1968 Standard Method Of Test For Density Of Paint, Varnish, Lacquer, And Related Products
ASTM D 3274 : 2009 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM D 3273 : 2021 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM E 1796 : 2003 : R2016 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 3960 : 1998 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 4214 : 2023 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM G 154 : 2016 : REDLINE Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM E 2239 : 2024 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM D 4541 : 2017 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM E 1605 : 2001 : REV A Standard Terminology Relating to Lead in Buildings
ASTM D 3359 : 2002 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 4541 : 2022 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D 3359 : 2009 : EDT 1 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 1308 : 2002 : EDT 1 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 2794 : 1993 : R1999 : EDT 1 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 4214 : 1998 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007)
ASTM D 3891 : 2008 : R2019 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM E 1796 : 2020 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 1212 : 1991 : R2001 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 1653 : 2003 : R2008 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 1653 : 2003 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 1475 : 1998 : R2008 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 1005 : 1995 : R2013 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 2794 : 1993 : R2004 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM E 1605 : 2003 : EDT 1 Standard Terminology Relating to Lead in Buildings
ASTM D 3359 : 2007 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 1308 : 1979 : R1981 : EDT 1 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM E 1605 : 2019 Standard Terminology Relating to Lead in Buildings
ASTM D 16 : 2024 Standard Terminology for Paint, Related Coatings, Materials, and Applications
ASTM D 3891 : 1996 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D 4214 : 2007 : R2015 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D 4214 : 2007 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D 7091 : 2013 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 1212 : 1991 : R1996 : EDT 1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 3274 : 2009 : R2013 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM D 3273 : 2000 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3925 : 2002 : R2022 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM D 2486 : 2006 : R2016 Standard Test Methods for Scrub Resistance of Wall Paints
ASTM D 7091 : 2013 : REDLINE Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 3891 : 2023 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D 823 : 2018 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 4414 : 1995 : R2007 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D 2794 : 1993 TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT)
ASTM D 1308 : 1987 : R1998 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM E 84 : 2023 : REV B Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 7091 : 2021 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 7091 : 2012 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM E 1605 : 2003 Standard Terminology Relating to Lead in Buildings
ASTM D 1212 : 1991 : R2007 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings
ASTM E 2239 : 2003 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM D 4060 : 1995 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 3924 : 1980 : R1996 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
ASTM E 1605 : 2004 Standard Terminology Relating to Lead in Buildings
ASTM D 7091 : 2005 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM E 1795 : 2000 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 3359 : 2023 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 1005 : 1995 : R2007 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 4414 : 1995 : R2013 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D 3359 : 2008 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 2794 : 1993 : R2019 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 3960 : 2004 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 1308 : 2002 : R2007 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 1653 : 2013 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM E 2239 : 2004 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 84 : 2023 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 3925 : 2002 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM D 3273 : 2016 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 1212 : 1991 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM E 1605 : 2001 Standard Terminology Relating to Lead in Buildings
ASTM D 4541 : 1995 : EDT 1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D 4414 : 1995 : R2001 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
FED-STD-141 Revision D:2001 PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING
ASTM D 1475 : 2013 : REDLINE Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 2486 : 2000 Standard Test Methods for Scrub Resistance of Wall Paints
ASTM D 2794 : 1993 : R2010 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 3273 : 2016 : REDLINE Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 1475 : 1998 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM D 3359 : 2017 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 3274 : 2009 : EDT 1 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM D 823 : 2018 : R2022 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 3925 : 2002 : R2015 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM D 1005 : 1995 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM E 1605 : 2004 : R2012 Standard Terminology Relating to Lead in Buildings
ASTM D 4060 : 2014 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 4060 : 2010 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM E 1605 : 2002 Standard Terminology Relating to Lead in Buildings
ASTM D 2486 : 2006 : R2012 : EDT 1 Standard Test Methods for Scrub Resistance of Wall Paints
ASTM D 16 : 2023 Standard Terminology for Paint, Related Coatings, Materials, and Applications
ASTM E 1796 : 2003 : R2011 : EDT 1 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 1653 : 2013 : REDLINE Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 1308 : 2002 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 4060 : 2019 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 3925 : 2002 : R2010 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM E 2239 : 2002 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM D 3924 : 2016 : R2019 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

View more information
$103.13
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more