Name: ASTM E 2103/E2103M : 2013
Brand: ASTM
Price: 135.86 AUD

ASTM E 2103/E2103M : 2013

Superseded

View Superseded by

Standard Classification for Bridge Elements—UNIFORMAT II

Available format(s)

Hardcopy , PDF

Superseded date

05-09-2019

Language(s)

English

Published date

01-05-2013

Publisher

American Society for Testing and Materials

1.1This standard establishes a classification of bridge elements within the UNIFORMAT II family of elemental classifications. It covers most highway bridges, railroad bridges, and pedestrian bridges.

1.2UNIFORMAT II classifications have an elemental format similar to the original UNIFORMAT² building elemental classification. However, the title UNIFORMAT II differs from the original in that it now takes into consideration a wide range of constructed entities that collectively form the built environment.

1.3Elements, as defined here and in other UNIFORMAT II Classifications, are major physical components that are common within constructed entities. Elements perform their given function(s), regardless of the design specification, construction method, or materials used.

1.4This elemental classification serves as a consistent reference for analysis, evaluation, and monitoring during the feasibility, planning, and design stages when constructing bridges.

1.5Using UNIFORMAT II elemental classifications ensures a consistency in the economic evaluation of construction projects over time and from project to project.

1.6UNIFORMAT II classifications also enhance reporting at all stages of a constructed entity’s life cycle—from feasibility and planning through the preparation of working documents, construction, maintenance, rehabilitation, and disposal.

1.7This classification is unsuitable for process applications or for preparing trade estimates.

1.8The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	E 06
DocumentType	Standard
Pages	18
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM E 2103/E2103M : 2019
Supersedes	ASTM E 2103 : 2011

ASTM E 1121 : 2012	Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
ASTM E 2691 : 2009	Standard Practice for Job Productivity Measurement
ASTM E 2514 : 2008	Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
ASTM E 1557 : 2005	Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
ASTM E 1804 : 2016	Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E 2516 : 2011	Standard Classification for Cost Estimate Classification System
ASTM E 1369 : 2011	Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E 1699 : 2000 : R2005	Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
ASTM E 1699 : 2010	Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects <a href="#fn00002"></a>
ASTM E 1369 : 2007 : EDT 2	Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E 1185 : 1993 : R1998 : EDT 1	Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
ASTM E 1369 : 2002	Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E 2083 : 2005 : R2016	Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit
ASTM E 2013 : 2006	Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
ASTM E 1369 : 2007	Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E 2013 : 2012	Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
ASTM E 1699 : 2000	Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
ASTM E 1946 : 2018	Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
ASTM E 2083 : 2000	Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit
ASTM E 1185 : 2007	Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
ASTM E 1121 : 2002	Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
ASTM E 2691 : 2011	Standard Practice for Job Productivity Measurement
ASTM E 1557 : 1997 : EDT 1	Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
ASTM E 1074 : 2015	Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
ASTM E 1804 : 2007	Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E 1557 : 2002	Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
ASTM E 1946 : 1998	Standard Practice for Measuring Cost Risk of Buildings and Building Systems
ASTM E 2506 : 2011	Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
ASTM E 1804 : 2012	Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E 1057 : 2006 : EDT 1	Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
ASTM E 2168 : 2001	Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
ASTM E 2514 : 2015	Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
ASTM E 2168 : 2010 : R2016	Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating
ASTM E 1121 : 2007 : EDT 1	Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
ASTM E 1369 : 2007 : EDT 1	Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E 2691 : 2016	Standard Practice for Job Productivity Measurement
ASTM E 1557 : 2009 : R2015	Standard Classification for Building Elements and Related Sitework—UNIFORMAT II
ASTM E 2168 : 2006	Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
ASTM E 1369 : 2015	Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E 2506 : 2006	Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
ASTM E 2516 : 2006	Standard Classification for Cost Estimate Classification System
ASTM E 2083 : 2005 : R2010	Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
ASTM E 1946 : 2002	Standard Practice for Measuring Cost Risk of Buildings and Building Systems
ASTM E 2506 : 2006 : EDT 1	Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
ASTM E 1074 : 2009	Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
ASTM E 1057 : 2004	Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
ASTM E 1946 : 2007	Standard Practice for Measuring Cost Risk of Buildings and Building Systems
ASTM E 2083 : 2005	Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
ASTM E 1804 : 1996	Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E 1057 : 1999	Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
ASTM E 1185 : 2012	Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
ASTM E 2168 : 2010	Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
ASTM E 1057 : 2015	Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
ASTM E 2506 : 2015	Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
ASTM E 1121 : 2015	Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
ASTM E 1074 : 2004	Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
ASTM E 2013 : 1999	Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
ASTM E 1804 : 2002	Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E 1121 : 1998	Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
ASTM E 1074 : 1993 : R1998 : EDT 1	Standard Practice for Measuring Net Benefits for Investments in Buildings and Building Systems
ASTM E 1057 : 2006	Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
ASTM E 1699 : 2014	Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
ASTM E 1557 : 2001	Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
ASTM E 1185 : 2007 : EDT 1	Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
ASTM E 2514 : 2006	Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
ASTM E 1074 : 2006	Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
ASTM E 1057 : 2006 : R2010	Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
ASTM E 1185 : 2015	Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
ASTM E 1185 : 2002	Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
ASTM E 1369 : 1998	Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E 1699 : 2013	Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
ASTM E 1557 : 2009	Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
ASTM E 1946 : 2012	Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects