Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 2907/E2907M : 2013 : R2019

Current
Current

The latest, up-to-date edition.

Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-05-2019

This practice provides guidelines for acoustic emission (AE) examinations of non-pressure, paper machine rolls.

1.1This practice provides guidelines for acoustic emission (AE) examinations of non-pressure, paper machine rolls.

1.2This practice utilizes a slow rotation of the roll to produce a full load cycle where load is provided by the weight of the roll suspended from its bearings or other journal support mechanism(s).

1.3This practice is used for detection of cracks and other discontinuities in rolls that produce frictional acoustic emission during rotation.

1.4The AE measurements are used to detect or locate emission sources, or both. Other nondestructive test (NDT) methods must be used to evaluate the significance of AE sources. Procedures for other NDT techniques are beyond the scope of this practice. See Note 1.

Note 1:Traditional AE examination, magnetic particle examination, shear wave ultrasonic examination, and radiography are commonly used to establish the exact position and dimensions of flaws that produce AE.

1.5The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 07
DocumentType
Standard Practice
Pages
7
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 1316 : 2022 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 976 : 2015 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
ASTM E 1316 : 2011 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2015 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2009 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2008 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2020 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2017 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 976 : 2015 : R2021 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
ASTM E 1316 : 2000 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 543 : 2021 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E 1316 : 2019 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2014 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2018 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2011 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2015 Standard Terminology for Nondestructive Examinations
ASTM E 2075 : 2000 Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
ASTM E 1316 : 2019 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2000 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2019 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2001 Standard Terminology for Nondestructive Examinations
ASTM E 2598 : 2007 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
ASTM E 1316 : 2003 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2018 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2024 Standard Terminology for <?Pub Dtl?>Nondestructive Examinations
ASTM E 1316 : 2006 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 543 : 2015 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E 1316 : 2016 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2014 : EDT 1 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2022 Standard Terminology for Nondestructive Examinations
ASTM E 2374 : 2016 Standard Guide for Acoustic Emission System Performance Verification
ASTM E 1316 : 2013 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 650 : 1997 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
ASTM E 1316 : 2017 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2016 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2009 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2004 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 2374 : 2004 Standard Guide for Acoustic Emission System Performance Verification
ASTM E 1316 : 2021 Standard Terminology for Nondestructive Examinations
ASTM E 2374 : 2015 Standard Guide for Acoustic Emission System Performance Verification
ASTM E 1316 : 2007 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 2374 : 2010 Standard Guide for Acoustic Emission System Performance Verification
ASTM E 1316 : 2005 Standard Terminology for Nondestructive Testing
ASTM E 1316 : 2004 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 Standard Terminology for Nondestructive Examinations
ASTM E 2075 : 2005 Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
ASTM E 1316 : 2023 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 2374 : 2016 : R2021 Standard Guide for Acoustic Emission System Performance Verification
ASTM E 1316 : 2012 Standard Terminology for Nondestructive Examinations

View more information
$103.13
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more