Name: ASTM E 3193 : 2019
Brand: ASTM
Price: 122.77 AUD

ASTM E 3193 : 2019

Superseded

Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)

Available format(s)

Hardcopy , PDF

Superseded date

31-07-2020

Language(s)

English

Published date

01-01-2019

Publisher

American Society for Testing and Materials

This test method covers the determination of lead (Pb) in dust by wipe, paint, and soil collected in and around buildings and related structures by flame atomic absorption spectrophotometry (FAAS) and is derived from Test Methods D4185 and E1613.

1.1This test method covers the determination of lead (Pb) in dust by wipe, paint, and soil collected in and around buildings and related structures by flame atomic absorption spectrophotometry (FAAS) and is derived from Test Methods D4185 and E1613. For determination of lead (Pb) and other metals in air by FAAS, see Test Method D4185.

1.2The sensitivity, detection limit, and optimum working concentration for lead (Pb) are given in Table 1.

1.3The values stated in SI units are to be regarded as standard. No other values of measurement are included in this standard.

1.3.1Exception—The SI and inch-pound units shown for wipe sampling data are to be individually regarded as standard for wipe sampling data (13.4.1).

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 22
DocumentType	Test Method
Pages	9
ProductNote	THIS STANDARD ALSO REFERS TO ASTM E 2914/E2914M, 40 CFR 745
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM E 3193 : 2020

ASTM E 1792 : 2003	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 4840 : 1999 : R2018 : EDT 1	Standard Guide for Sample Chain-of-Custody Procedures
ASTM E 1792 : 2003 : R2011	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1792 : 2001	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1726 : 2001	Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 1792 : 2003 : R2016	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 4840 : 1999	Standard Guide for Sampling Chain-of-Custody Procedures
ASTM D 7035 : 2016	Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 1583 : 1993	Practice for Evaluating Laboratories Engaged in the Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures (Withdrawn 1998)
ASTM E 1188 : 2005	Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1645 : 2001 : R2007	Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D 6966 : 2018	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM E 1188 : 1995	Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1644 : 2004 : R2012 : EDT 1	Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1613 : 2012	Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
ASTM E 1644 : 2017	Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1979 : 2004	Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1645 : 1994	Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D 6785 : 2013	Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D 7035 : 2010	Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 1729 : 1999	Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E 1864 : 1997	Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
ASTM E 2115 : 2000	Standard Guide for Conducting Lead Hazard Assessments of Residential Housing and Other Properties Frequented by Children
ASTM D 6785 : 2002	Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1605 : 2001 : REV B	Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 1999	Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM D 4185 : 2006 : R2011	Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM E 1741 : 2000	Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry (Withdrawn 2009)
ASTM D 6785 : 2008	Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1645 : 2016	Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 1645 : 2001	Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 2115 : 2006	Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities (Withdrawn 2015)
ASTM D 4185 : 2017	Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM D 6966 : 2008	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E 1727 : 2005	Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014)
ASTM E 2239 : 2012	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1908 : 1997	Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb)
ASTM E 1979 : 2012 : R2016	Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1726 : 2001 : R2009	Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 1729 : 2004	Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM E 1864 : 2002	Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011)
ASTM E 1908 : 2003	Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
ASTM D 4185 : 1996	Standard Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
ASTM E 2239 : 2012 : R2016	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1605 : 2000	Standard Terminology Relating to Lead in Buildings
ASTM E 1729 : 2016	Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
ASTM E 1728 : 2016	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1605 : 2018	Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2018 : REV A	Standard Terminology Relating to Lead in Buildings
ASTM E 1908 : 2010	Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
ASTM E 1613 : 1999	Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E 1727 : 1999	Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E 1979 : 2017	Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1605 : 2001 : REV A	Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 2002	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1792 : 2002	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 2115 : 2019	Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 1188 : 2011	Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1729 : 2005	Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination (Withdrawn 2014)
ASTM E 1979 : 2012	Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM E 1605 : 2003 : EDT 1	Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2019	Standard Terminology Relating to Lead in Buildings
ASTM D 4697 : 1995 : R2001	Standard Guide for Maintaining Test Methods in the User's Laboratory (Withdrawn 2009)
ASTM E 1728 : 2010	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1583 : 2017	Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
ASTM D 4185 : 2006	Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM D 6966 : 2003	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E 1605 : 2003	Standard Terminology Relating to Lead in Buildings
ASTM E 1613 : 2004	Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E 2115 : 2015	Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 1605 : 2018 : REV B	Standard Terminology Relating to Lead in Buildings
ASTM E 2239 : 2003	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1792 : 2001 : EDT 1	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1605 : 2004	Standard Terminology Relating to Lead in Buildings
ASTM E 1644 : 2004	Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM E 1188 : 2011 : R2017	Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1727 : 2004	Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E 2115 : 2005	Standard Guide for Conducting Lead Hazard Assessments of Dwellings and Other Facilities Frequented by Children
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM E 1979 : 1998	Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 2239 : 2004	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E 1644 : 1998	Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1726 : 2016	Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 4210 : 1989 : R1996 : EDT 1	Standard Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data (Withdrawn 2002)
ASTM E 1792 : 1996 : REV A	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1605 : 2001	Standard Terminology Relating to Lead in Buildings
ASTM E 1726 : 1995	Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 2115 : 2005 : REV A	Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 1644 : 2004 : R2016 : EDT 1	Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D 7035 : 2004	Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM E 1605 : 2004 : R2012	Standard Terminology Relating to Lead in Buildings
ASTM E 1727 : 2016	Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM D 6966 : 2013	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E 1605 : 2002	Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 2003	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM D 4697 : 1995	Standard Guide for Maintaining Test Methods in the User's Laboratory
ASTM E 1908 : 2016	Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
ASTM E 1645 : 2001 : R2016 : EDT 1	Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 2239 : 2002	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities