Name: ASTM E 353 : 2014
Brand: ASTM
Price: 191.52 AUD

ASTM E 353 : 2014

Superseded

Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

Available format(s)

Hardcopy , PDF

Superseded date

28-04-2020

Language(s)

English

Published date

15-09-2014

Publisher

American Society for Testing and Materials

These test methods cover the chemical analysis of stainless, heat-resisting, maraging, and other similar chromium-nickel-iron alloys having chemical compositions within the following limits.

1.1These test methods cover the chemical analysis of stainless, heat-resisting, maraging, and other similar chromium-nickel-iron alloys having chemical compositions within the following limits:

Element	Composition Range, %
Aluminum		0.002	to 5.50
Boron		0.001	to 0.20
Carbon		0.01	to 1.50
Chromium		0.01	to 35.00
Cobalt		0.01	to 15.00
Niobium		0.01	to 4.00
Copper		0.01	to 5.00
Lead		0.001	to 0.50
Manganese		0.01	to 20.00
Molybdenum		0.01	to 7.00
Nickel		0.01	to 48.00
Nitrogen		0.001	to 0.50
Phosphorus		0.002	to 0.35
Selenium		0.01	to 0.50
Silicon		0.01	to 4.00
Sulfur		0.002	to 0.50
Tantalum		0.01	to 0.80
Tin		0.001	to 0.05
Titanium		0.01	to 4.50
Tungsten		0.01	to 4.50
Vanadium		0.005	to 1.00
Zirconium		0.001	to 0.20

1.2The test methods in this standard are contained in the sections indicated below:

	Sections
Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 % to 7.00 %)	119
Aluminum, Total, by the 8-Quinolinol Spectrophotometric Method (0.003 % to 0.20 %)	71
Carbon, Total, by the Combustion–Thermal Conductivity Method	Discontinued
Carbon, Total, by the Combustion Gravimetric Method (0.05 % to 1.50 %)	Discontinued
Chromium by the Atomic Absorption Method (0.006 % to 1.00 %)	202
Chromium by the Peroxydisulfate Oxidation–Titration Method (0.10 % to 35.00 %)	212
Chromium by the Peroxydisulfate-Oxidation Titrimetric Method	Discontinued
Cobalt by the Ion-Exchange–Potentiometric Titration Method (2 % to 15 %)	53
Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.01 % to 5.0 %)	61
Copper by the Neocuproine Spectrophotometric Method (0.01 % to 5.00) %)	109
Copper by the Sulfide Precipitation-Electrodeposition Gravimetric Method (0.01 % to 5.00 %)	82
Lead by the Ion-Exchange-Atomic Absorption Method (0.001 % to 0.50 %)	127
Manganese by the Periodate Spectrophotometric Method (0.01 % to 5.00 %)	8
Molybdenum by the Ion Exchange–8-Hydroxyquinoline Gravimetric Method	242
Molybdenum by the Spectrophotometric Method (0.01 % to 1.50 %)	190
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to 48.0 %)	172
Phosphorus by the Alkalimetric Method (0.02 % to 0.35 %)	164
Phosphorus by the Molybdenum Blue Spectrophotometric Method (0.002 % to 0.35 %)	18
Silicon by the Gravimetric Method (0.05 % to 4.00 %)	46
Sulfur by the Gravimetric Method	Discontinued
Sulfur by the Combustion-Iodate Titration Method (0.005 % to 0.5 %)	Discontinued
Sulfur by the Chromatographic Gravimetric Method	Discontinued
Tin by the Solvent Extraction–Atomic Absorption Method (0.002 % to 0.10 %)	180
Tin by the Sulfide-Iodometric Titration Method (0.01 % to 0.05 %)	90
Titanium, Total, by the Diantipyrylmethane Spectrophotometric Method (0.01 % to 0.35 %)	231
Vanadium by the Atomic Absorption Method (0.006 % to 0.15 %)	221

1.3Test methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.

1.4Some of the composition ranges given in 1.1 are too broad to be covered by a single test method and therefore this standard contains multiple test methods for some elements. The user must select the proper test method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.

1.5The values stated in SI units are to be regarded as standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.

Committee	E 01
DocumentType	Test Method
Pages	44
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM E 353 : 2019
Supersedes	ASTM E 353 : 1993 : R2006

ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM E 1019 : 2018	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
ASTM E 1019 : 2003	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
ASTM E 1806 : 1996 : R2006	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM E 1601 : 2019	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1601 : 1998	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1019 : 2008	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
ASTM E 1024 : 1997 : R2004	Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry (Withdrawn 2004)
ASTM E 1601 : 2010	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1806 : 2009	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E 1806 : 2009 : R2016	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM E 1601 : 2012	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1806 : 2018	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E 1806 : 1996	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM E 1024 : 1997	Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
ASTM E 1019 : 2000	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM E 1806 : 1996 : R2001	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E 1019 : 2002	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
ASTM E 1019 : 2011	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques