ASTM E 50 : 1982 : R1986
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
22-09-2020
English
31-12-2010
Committee |
E 01
|
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
ASTM E 2823 : 2017 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based) |
ASTM E 352 : 2018 | Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
ASTM C 25 : 2019 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
ASTM E 439 : 2017 | Standard Test Methods for Chemical Analysis of Beryllium |
ASTM E 1916 : 2011 : R2019 | Standard Guide for Identification of Mixed Lots of Metals |
ASTM E 2941 : 2014 | Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion |
ASTM E 353 : 2019 | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
ASTM B 368 : 2009 : R2014 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
ASTM E 815 : 2017 : REV B | Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry |
ASTM E 1835 : 2014 | Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry |
ASTM E 3061 : 2017 | Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method) |
ASTM E 2295 : 2013 | Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels |
ASTM E 1834 : 2018 | Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
ASTM C 1494 : 2013 : R2018 | Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder |
ASTM E 53 : 2007 : R2013 | Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry (Withdrawn 2022) |
ASTM B 248M : 2017 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric) |
ASTM E 1409 : 2013 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
ASTM E 1070 : 2017 : REV A | Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry |
ASTM E 945 : 2012 | Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry (Withdrawn 2021) |
ASTM D 2674 : 1972 : R2012 | Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum |
ASTM E 581 : 2017 : REV A | Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys |
ASTM E 1898 : 2013 | Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
ASTM E 1852 : 2019 | Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 396 : 2017 | Standard Test Methods for Chemical Analysis of Cadmium |
ASTM B 115 : 2010 : R2016 | Standard Specification for Electrolytic Copper Cathode |
ASTM E 1335 : 2008 : R2017 | Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis |
ASTM C 146 : 1994 : REV A : R2014 | Standard Test Methods for Chemical Analysis of Glass Sand |
ASTM E 354 : 2014 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
ASTM E 372 : 2021 | Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titrimetry |
ASTM E 350 : 2018 | Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron |
ASTM E 841 : 2012 : REV A | Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry (Withdrawn 2021) |
ASTM C 169 : 2016 | Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass |
ASTM E 1600 : 2015 | Standard Test Methods for Determination of Gold in Cyanide Solutions |
ASTM E 194 : 2020 | Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders |
ASTM E 247 : 2001 : R2015 : EDT 1 | Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
ASTM E 1938 : 2013 : R2018 | Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry |
ASTM D 444 : 1988 : R2020 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
ASTM E 1446 : 2013 | Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry (Withdrawn 2022) |
ASTM E 1587 : 2017 | Standard Test Methods for Chemical Analysis of Refined Nickel |
ASTM D 1394 : 1976 : R2020 | Standard Test Methods for Chemical Analysis of White Titanium Pigments |
ASTM C 760 : 1990 : R2020 | Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
ASTM D 3610 : 2000 : R2015 | Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
ASTM E 1941 : 2010 : R2016 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
ASTM E 1917 : 2013 : R2018 | Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry |
ASTM E 1770 : 2019 | Standard Practice for Optimization of Instrumentation for Graphite Furnace Atomic Absorption Spectrometry |
ASTM A 751 : 2020 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
ASTM E 536 : 2016 | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
ASTM E 2296 : 2003 : R2013 | Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry |
ASTM E 2294 : 2003 : R2013 | Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry |
ASTM E 463 : 2014 : REV A | Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry |
ASTM C 458/C458M : 1998 : R2019 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products (Withdrawn 2022) |
ASTM E 1915 : 2020 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
ASTM E 2242 : 2013 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM E 342 : 2011 : R2016 | Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry |
ASTM C 759 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions |
ASTM E 2575 : 2019 | Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion |
ASTM B 604 : 1991(R2019) | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
ASTM E 1552 : 2015 | Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry (Withdrawn 2021) |
ASTM E 316 : 2017 | Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry |
ASTM E 1184 : 2010 : R2016 | Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 508 : 2013 | Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry |
ASTM E 1097 : 2012 : R2017 | Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry |
ASTM E 382 : 2020 | Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets and Direct-Reduced Iron |
ASTM E 1568 : 2013 | Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry |
ASTM E 1019 : 2018 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques |
ASTM E 200 : 2016 | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
ASTM E 1659 : 2012 | Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet (Withdrawn 2021) |
ASTM B 928/B928M : 2015 | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
ASTM E 278 : 2001 : R2015 : EDT 1 | Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry |
ASTM E 2293 : 2019 | Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury |
ASTM E 1447 : 2009 : R2016 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
ASTM E2972 : 2015(2019) | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
ASTM E 878 : 2012 | Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry |
ASTM E 246 : 2010 : R2015 | Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry |
ASTM E 1277 : 2014 | Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry |
ASTM B 298 : 2012 : R2017 | Standard Specification for Silver-Coated Soft or Annealed Copper Wire |
ASTM E 2824 : 2018 : REV A | Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry |
ASTM E 2594 : 2020 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based) |
ASTM E 1473 : 2016 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
ASTM A 922 : 2005 : R2020 | Standard Specification for Silicon Metal |
ASTM E 2792 : 2013 | Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion |
ASTM E 465 : 2011 : R2017 | Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry |
ASTM B 216 : 2016 | Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes |
ASTM B 456 : 2017 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
ASTM C 816 : 2015 : R2020 : EDT 1 | Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method |
ASTM E 363 : 2016 | Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium |
ASTM E 507 : 2013 | Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry |
ASTM B 248 : 2017 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM D 4042 : 1993 : R2019 | Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
ASTM E 351 : 2018 | Standard Test Methods for Chemical Analysis of Cast Iron—All Types |
ASTM C 1271 : 1999 : R2020 | Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone |
ASTM E 314 : 2016 | Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques |
ASTM E 2050 : 2017 | Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion |
ASTM E 248 : 2012 | Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry |
ASTM E 367 : 2016 | Standard Test Methods for Chemical Analysis of Ferroniobium |
ASTM E 478 : 2008 : R2017 | Standard Test Methods for Chemical Analysis of Copper Alloys |
ASTM E 1805 : 2013 | Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry |
ASTM B 170 : 1999 : R2020 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.