ASTM E 644 : 2011 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Methods for Testing Industrial Resistance Thermometers
English
01-05-2011
CONTAINED IN VOL. 14.03, 2015 Explains the principles, apparatus, and procedures for calibration and testing of industrial resistance thermometers.
1.1 These test methods cover the principles, apparatus, and procedures for calibration and testing of industrial resistance thermometers.
1.2 These test methods cover the tests for insulation resistance, calibration, immersion error, pressure effects, thermal response time, vibration effect, mechanical shock, self-heating effect, stability, thermoelectric effect, humidity, thermal hysteresis, thermal shock, and end seal integrity.
1.3 These test methods are not necessarily intended for, recommended to be performed on, or appropriate for every type of thermometer. The expected repeatability and reproducibility of the results are tabulated in Appendix X4.
1.4 These test methods, when specified in a procurement document, shall govern the method of testing the resistance thermometer.
1.5 Thermometer performance specifications, acceptance limits, and sampling methods are not covered in these test methods; they should be specified separately in the procurement document.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 5, 6, 8, 16, and 17.
| Committee |
E 20
|
| DocumentType |
Redline
|
| Pages |
24
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| MIL-T-17585 Revision C:1983 | THERMOMETER, RECORDING, CAPILLARY TUBE AND BULB, AND RESISTANCE |
| ASTM E 228 : 2017 : REDLINE | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
| ASTM E 1137 : 1997 | Standard Specification for Industrial Platinum Resistance Thermometers |
| AASHTO T 48 : 2006 : R2010 | METHOD OF TEST FOR FLASH AND FIRE POINTS BY CLEVELAND OPEN CUP |
| ASTM D 6176 : 1997 : R2003 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors |
| ASTM D 6371 : 2017-06 | TEST METHOD FOR COLD FILTER PLUGGING POINT OF DIESEL AND HEATING FUELS |
| ASTM D 7552 : 2009 | Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer |
| ASTM D 7175 : 2015 : REDLINE | Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM D 8055 : 2017 | Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards |
| ASTM E 2593 : 2017 : REDLINE | Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers |
| ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
| API MPM CH7.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATURE DETERMINATION - SECTION 4 - DYNAMIC TEMPERATURE MEASUREMENT |
| 17/30366325 DC : 0 | BS EN ISO 3104 - PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY |
| 18/30358441 DC : DRAFT APR 2018 | BS EN ISO 3016 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF POUR POINT |
| BS ISO 17714:2007 | Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
| ASTM D 7981 : 2015 | Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor |
| ASTM D 5982 : 2015 : REDLINE | Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) |
| AASHTO T 300 : 2011 | METHOD OF TEST FOR FORCE DUCTILITY TEST OF ASPHALT MATERIALS |
| ASTM D 2162 : 2017 : REDLINE | Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards |
| ASTM E 2877 : 2012 | Standard Guide for Standard Guide for Digital Contact Thermometers |
| ASTM D 6176M : 1997 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric) |
| ASTM D 5801 : 2017 : REDLINE | Standard Test Method for Toughness and Tenacity of Asphalt Materials |
| ASTM E 2877 : 2012e1 | GUIDE FOR DIGITAL CONTACT THERMOMETERS |
| ASTM D 8079 : 2016 | Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor |
| ASTM E 2488 : 2009 : R2014 | Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison |
| ASTM E 2488 : 2009 | Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison |
| ASTM D 4402/D4402M : 2015 : REDLINE | Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
| 18/30358429 DC : DRAFT APR 2018 | BS EN ISO 3015 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF CLOUD POINT |
| AASHTO T 240 : 2013 | METHOD OF TEST FOR EFFECT OF HEAT AND AIR ON A MOVING FILM OF ASPHALT BINDER (ROLLING THIN-FILM OVEN TEST) |
| AASHTO T 48 : 2006 : R2015 | METHOD OF TEST FOR FLASH AND FIRE POINTS BY CLEVELAND OPEN CUP |
| ASTM D 8164 : 2018 | Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing |
| ASTM D 243/D243M : 2014 : REDLINE | Standard Test Method for Residue of Specified Penetration |
| ASTM E 1137/E1137M : 2008 | Standard Specification for Industrial Platinum Resistance Thermometers |
| ASTM D 6176 : 1997 : R2008 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors |
| AASHTO T 100 : 2015 | METHOD OF TEST FOR SPECIFIC GRAVITY OF SOILS |
| ASTM D 4957 : 2018 | Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer |
| ASTM D 7552 : 2009 : R2014 | Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer |
| ASTM D 6176 : 1997 : R2015 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors |
| ASTM E 220 : 2013 : REDLINE | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
| DIN ISO 17714:2008-06 | METEOROLOGY - AIR TEMPERATURE MEASUREMENTS - TEST METHODS FOR COMPARING THE PERFORMANCE OF THERMOMETER SHIELDS/SCREENS AND DEFINING IMPORTANT CHARACTERISTICS |
| AASHTO T 59 : 2015 | METHOD OF TEST FOR EMULSIFIED ASPHALTS |
| ASTM D 6084/D6084M : 2013-12 | TEST METHOD FOR ELASTIC RECOVERY OF ASPHALT MATERIALS BY DUCTILOMETER |
| ASTM E 1502 : 2016 : REDLINE | Standard Guide for Use of Fixed-Point Cells for Reference Temperatures |
| ISO 17714:2007 | Meteorology Air temperature measurements Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
| AASHTO T 301 : 2013 | METHOD OF TEST FOR ELASTIC RECOVERY TEST OF ASPHALT MATERIALS BY MEANS OF A DUCTILOMETER |
| ASTM E 1137/E1137M : 2008 : R2014 | Standard Specification for Industrial Platinum Resistance Thermometers |
| ASTM D 402/D402M : 2014 : REDLINE | Standard Test Method for Distillation of Cutback Asphalt (Withdrawn 2023) |
| ASTM D 113 : 2017 | Standard Test Method for Ductility of Asphalt Materials |
| ASTM E 344 : 2016-12 | TERMINOLOGY RELATING TO THERMOMETRY AND HYDROMETRY |
| ASTM E 230 : 2003 | Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM E 2251 : 2014 : REDLINE | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM E 344 : 2016-12 | TERMINOLOGY RELATING TO THERMOMETRY AND HYDROMETRY |
| ASTM E 1502 : 2016 : REDLINE | Standard Guide for Use of Fixed-Point Cells for Reference Temperatures |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| ASTM E 1751 : 2000 | Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations (Withdrawn 2009) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.