ASTM D 1929 : 2020
|
Standard Test Method for Determining Ignition Temperature of Plastics |
ASTM D 6166 : 2012 : R2016
|
Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color) |
ASTM D 7115 : 2020
|
Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
ASTM D 4678 : 2015 : REV A : R2019
|
Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
ASTM E 562 : 2019 : EDT 1
|
Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
ASTM D 5530 : 2015
|
Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry |
ASTM E 2792 : 2013
|
Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion |
ASTM D 4891 : 2013 : R2018
|
Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion |
ASTM D 6234 : 2013 : R2020
|
Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
ASTM D 5147/D5147M : 2018
|
Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material |
ASTM D 1353 : 2013
|
Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products |
ASTM F 2150 : 2019
|
Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products |
ASTM D 7736 : 2019 : REV A
|
Standard Test Method for Determination of Acids and Glycol Esters in Glycols |
ASTM D 3803 : 1991 : R2014
|
Standard Test Method for Nuclear-Grade Activated Carbon |
ASTM E 2714 : 2013 : R2020
|
Standard Test Method for Creep-Fatigue Testing |
ASTM D 8352 : 2020
|
Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction |
ASTM D 7871 : 2019
|
Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number) |
ASTM B 312 : 2020
|
Standard Test Method for Green Strength of Specimens Compacted from Metal Powders |
ASTM C 518 : 2017
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM C 1327 : 2015 : R2019
|
Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics |
ASTM F 2634 : 2015
|
Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method |
ASTM F 3340 : 2018
|
Standard Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus |
ASTM C 830 : 2000 : R2016
|
Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure |
ASTM E 2248 : 2018
|
Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens |
ASTM F 2381 : 2019
|
Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy |
ASTM D 2396 : 2020
|
Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer |
ASTM D 2862 : 2016
|
Standard Test Method for Particle Size Distribution of Granular Activated Carbon |
ASTM G 180 : 2013 : R2019
|
Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries |
ASTM C 373 : 2018
|
Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products |
ASTM E 3061 : 2017
|
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method) |
ASTM D 6387 : 2019
|
Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography |
ASTM E 2009 : 2008 : R2014 : EDT 1
|
Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry |
ASTM G 204 : 2015
|
Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions |
ASTM D 7735 : 2017
|
Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures |
ASTM D 3907/D3907M : 2019
|
Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test |
ASTM D 653 : 2021
|
Standard Terminology Relating to Soil, Rock, and Contained Fluids |
ASTM D 3420 : 2014
|
Standard Test Method for Pendulum Impact Resistance of Plastic Film |
ASTM D 6851 : 2020
|
Standard Test Method for Determination of Contact pH with Activated Carbon |
ASTM F 2459 : 2018
|
Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis |
ASTM D 7710 : 2014
|
Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials (Withdrawn 2021) |
ASTM D 1585 : 2015 : R2020
|
Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products |
ASTM D 6259 : 2015 : R2019
|
Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method |
ASTM C 1203 : 2004 : R2019
|
Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
ASTM D 4049 : 2020
|
Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray |
ASTM D 6741 : 2010 : R2019
|
Standard Test Methods for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content |
ASTM D 8036 : 2016
|
Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI |
ASTM D 1037 : 2012 : R2020
|
Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
ASTM D 7698 : 2020
|
Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method |
ASTM D 4239 : 2018 : EDT 1
|
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion |
ASTM D 5470 : 2017
|
Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials |
ASTM B 769 : 2011 : R2016
|
Standard Test Method for Shear Testing of Aluminum Alloys |
ASTM F 1976 : 2013
|
Standard Test Method for Impact Attenuation of Athletic Shoe Cushioning Systems and Materials (Withdrawn 2022) |
ASTM D 8176 : 2018
|
Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh) |
ASTM D 2777 : 2013
|
Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM F 1927 : 2020
|
Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector |
ASTM G 51 : 2018
|
Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing |
ASTM D 4464 : 2015 : R2020
|
Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering |
ASTM D 1683/D1683M : 2017 : R2018
|
Standard Test Method for Failure in Sewn Seams of Woven Fabrics |
ASTM D 6484/D6484M : 2020
|
Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
ASTM D 2369 : 2020
|
Standard Test Method for Volatile Content of Coatings |
ASTM G 134 : 2017
|
Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet |
ASTM B 946 : 2011 : R2016
|
Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products |
ASTM F 36 : 2015
|
Standard Test Method for Compressibility and Recovery of Gasket Materials |
ASTM F 2214 : 2016
|
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
ASTM D 7881 : 2020 : EDT 1
|
Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode |
ASTM C 835 : 2006 : R2020
|
Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C |
ASTM D 6133 : 2002 : R2021
|
Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
ASTM D 6479 : 2015 : R2020
|
Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints |
ASTM G 156 : 2017
|
Standard Practice for Selecting and Characterizing Weathering Reference Materials |
ASTM D 4355/D4355M : 2021
|
Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus |
ASTM D 7918 : 2017 : REV A
|
Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation |
ASTM E 2301 : 2012 : R2017
|
Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry |
ASTM E 1695 : 2020
|
Standard Test Method for Measurement of Computed Tomography (CT) System Performance |
ASTM E 2187 : 2020 : REV A
|
Standard Test Method for Measuring the Ignition Strength of Cigarettes |
ASTM D 1790 : 2021
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM E 537 : 2020
|
Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry |
ASTM D 3768 : 2016
|
Standard Test Method for Microcellular Urethanes—Flexural Recovery |
ASTM D 638 : 2014
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 6042 : 2009 : R2016
|
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
ASTM C 1182 : 2009(R2019)
|
Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation |
ASTM A 1038 : 2019
|
Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
ASTM E 3097 : 2017
|
Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys |
ASTM E 2832 : 2012 : R2017
|
Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2) |
ASTM D 2638 : 2021
|
Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
ASTM D 5824 : 1998 : R2017
|
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
ASTM D 5628 : 2018
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) |
ASTM B 648 : 2010 : R2015 : EDT 1
|
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
ASTM E 1834 : 2018
|
Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 991 : 2016
|
Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
ASTM F 2607 : 2008 : R2014
|
Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners |
ASTM C 1559 : 2015
|
Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type) |
ASTM F 2828 : 2020
|
Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System |
ASTM D 5158 : 1998 : R2019
|
Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving |
ASTM F 1334 : 2018
|
Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
ASTM D 6886 : 2018
|
Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography |
ASTM D 1004 : 2021
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM E 1868 : 2010 : R2015
|
Standard Test Methods for Loss-On-Drying by Thermogravimetry |
ASTM F 2004 : 2017
|
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
ASTM C 1279 : 2013 : R2019
|
Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
ASTM D 3574 : 2017
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM D 7967 : 2016
|
Standard Test Method for Analysis of Chrome Content (as Cr2O3) in Wet Blue using Atomic Absorption |
ASTM E 2603 : 2015
|
Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters |
ASTM F 1914 : 2018
|
Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering |
ASTM D 5504 : 2020
|
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 8087 : 2018
|
Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry |
ASTM C 1134 : 2017
|
Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion |
ASTM F 1978 : 2018
|
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
ASTM D 4567 : 2019
|
Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method |
ASTM D 7305 : 2008 : REV A : R2020
|
Standard Test Method for Reflection Density of Printed Matter |
ASTM D 7234 : 2019
|
Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
ASTM D 953 : 2019
|
Standard Test Method for Pin-Bearing Strength of Plastics |
ASTM F 970 : 2017
|
Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading |
ASTM D 7148 : 2019 : REV A
|
Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System |
ASTM C 1733 : 2020
|
Standard Test Method for Distribution Coefficients of Inorganic Species by Batch Method |
ASTM C 307 : 2018
|
Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings |
ASTM F 2199 : 2020
|
Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat |
ASTM C 198 : 2009 : R2019
|
Standard Test Method for Cold Bonding Strength of Refractory Mortar |
ASTM D 695 : 2015
|
Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM B 761 : 2017
|
Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation |
ASTM D 7315 : 2017
|
Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode |
ASTM D 6818 : 2021
|
Standard Test Method for Tensile Properties of Rolled Erosion Control Products |
ASTM F 3139 : 2015
|
Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry |
ASTM G 151 : 2019
|
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
ASTM D 3366 : 2018
|
Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
ASTM D 5045 : 2014
|
Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
ASTM D 4164 : 2013 : R2018
|
Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers |
ASTM D 4475 : 2002 : R2016
|
Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method |
ASTM D 8063 : 2018
|
Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration |
ASTM C 474 : 2015 : R2020
|
Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
ASTM D 3361/D3361M : 2013 : R2018
|
Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
ASTM D 2463 : 2015
|
Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
ASTM F 1888 : 2009 : R2016
|
Standard Test Method for Compression-Displacement of Baseballs and Softballs |
ASTM D 4350 : 2016
|
Standard Test Method for Corrosivity Index of Plastics and Fillers |
ASTM E 2274 : 2016
|
Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants |
ASTM D 8243 : 2019
|
Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method |
ASTM G 153 : 2013
|
Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
ASTM E 3165 : 2018
|
Standard Test Method for Nighttime Retroreflected Chromaticity of Retroreflective Sheeting |
ASTM D 2799 : 2013
|
Standard Test Method for Microscopical Determination of the Maceral Composition of Coal |
ASTM C 1363 : 2019
|
Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
ASTM D 5155 : 2019
|
Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
ASTM D 5228 : 2016
|
Standard Test Method for Determination of Butane Working Capacity of Activated Carbon |
ASTM D 6032/D6032M : 2017
|
Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core |
ASTM D 8032 : 2020
|
Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration |
ASTM D 6657 : 2016
|
Standard Test Method for pH of Wet Blue and Wet White |
ASTM D 7359 : 2018
|
Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
ASTM D 4463/D4463M : 2019
|
Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
ASTM G 65 : 2016 : EDT 1
|
Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus |
ASTM E 606/E606M : 2019 : EDT 1
|
Standard Test Method for Strain-Controlled Fatigue Testing |
ASTM D 7830/D7830M : 2014
|
Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
ASTM D 8130 : 2017
|
Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method |
ASTM D 3576 : 2020
|
Standard Test Method for Cell Size of Rigid Cellular Plastics |
ASTM D 2412 : 2021
|
Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading |
ASTM D 7542 : 2015
|
Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime |
ASTM F 1863 : 2016
|
Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts |
ASTM G 67 : 2018
|
Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
ASTM D 6973 : 2014 : R2019
|
Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
ASTM E 2540 : 2016 : EDT 1
|
Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle |
ASTM E 1617 : 2009 : R2019
|
Standard Practice for Reporting Particle Size Characterization Data |
ASTM D 5672/D5672M : 2015
|
Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique |
ASTM D 7937 : 2015
|
Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water |
ASTM D 7823 : 2020
|
Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry |
ASTM C 604 : 2018
|
Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer |
ASTM D 6299 : 2020 : REV A
|
Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 3418 : 2015
|
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM D 1725 : 2012 : R2019
|
Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method |
ASTM D 7819 : 2012 : R2016
|
Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins |
ASTM F 735 : 2017
|
Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
ASTM C 1785 : 2017
|
Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing |
ASTM D 8356 : 2020
|
Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio |
ASTM D 3273 : 2016
|
Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
ASTM G 181 : 2011 : R2017
|
Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
ASTM E 970 : 2017
|
Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
ASTM D 7283 : 2017
|
Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting |
ASTM E 1640 : 2018
|
Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis |
ASTM F 386 : 2017
|
Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces |
ASTM D 127 : 2019
|
Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum |
ASTM D 2578 : 2017
|
Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films |
ASTM D 3663 : 2020
|
Standard Test Method for Surface Area of Catalysts and Catalyst Carriers |
ASTM D 6641/D6641M : 2016 : EDT 1
|
Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
ASTM B 214 : 2016
|
Standard Test Method for Sieve Analysis of Metal Powders |
ASTM D 7151 : 2015
|
Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM D 1000 : 2017
|
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
ASTM D 2305 : 2018
|
Standard Test Methods for Polymeric Films Used for Electrical Insulation |
ASTM D 4884/D4884M : 2014 : REV A
|
Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles |
ASTM D 7005/D7005M : 2016
|
Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
ASTM D 5420 : 2021
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
ASTM D 6656 : 2016
|
Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation) |
ASTM D 3103 : 2020
|
Standard Test Method for Thermal Insulation Performance of Distribution Packages |
ASTM D 7682 : 2017
|
Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty |
ASTM F 2082/F2082M : 2016
|
Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
ASTM E 3151 : 2018
|
Standard Test Method for Determining Antimicrobial Activity and Biofilm Resistance Properties of Tube, Yarn, or Fiber Specimens |
ASTM D 6463/D6463M : 2006 : R2020
|
Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
ASTM D 3795 : 2020
|
Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
ASTM F 3299 : 2018
|
Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor) |
ASTM D 7570 : 2017
|
Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering |
ASTM D 7582 : 2015
|
Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
ASTM D 4204 : 2016
|
Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study |
ASTM E 3047 : 2016
|
Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry |
ASTM F 1802 : 2015
|
Standard Test Method for Performance Testing of Excess Flow Valves |
ASTM D 7681 : 2011 : R2016 : EDT 1
|
Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer |
ASTM G 98 : 2017
|
Standard Test Method for Galling Resistance of Materials |
ASTM F 801 : 2016
|
Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts |
ASTM C 802 : 2014
|
Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
ASTM G 141 : 2009 : R2013
|
Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials |
ASTM E 92 : 2017
|
Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
ASTM D 6902 : 2004 : R2017
|
Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings |
ASTM D 7047 : 2015 : EDT 1
|
Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium) |
ASTM D 494 : 2011(R2019)
|
Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products |
ASTM D 1412/D1412M : 2020
|
Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C |
ASTM D 1525 : 2017 : EDT 1
|
Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM E 2860 : 2020
|
Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels |
ASTM D 2658 : 2018
|
Standard Test Method for Determining Dimensions of Fiberboard Boxes |
ASTM D 5341/D5341M : 2019
|
Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
ASTM D 7391 : 2020
|
Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy |
ASTM C 1819 : 2015
|
Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
ASTM F 1276 : 1999 : R2016
|
Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials |
ASTM B 975 : 2018 : EDT 1
|
Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method) |
ASTM E 1545 : 2011 : R2016
|
Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis |
ASTM D 6476 : 2012 : R2017 : EDT 1
|
Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics |
ASTM D 5831 : 2017
|
Standard Practice for Screening Fuels in Soils |
ASTM D 7811 : 2013 : R2017
|
Standard Test Method for Bow and Skew Using a Measuring Tool |
ASTM F 3022 : 2016 : EDT 1
|
Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments |
ASTM E 1710 : 2018
|
Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer |
ASTM F 1930 : 2018
|
Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin |
ASTM E 1590 : 2017
|
Standard Test Method for Fire Testing of Mattresses |
ASTM G 72/G72M : 2015
|
Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment |
ASTM E 2298 : 2018
|
Standard Test Method for Instrumented Impact Testing of Metallic Materials |
ASTM D 7639 : 2010 : R2018
|
Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence |
ASTM D 4280 : 2018
|
Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers |
ASTM F 88/F88M : 2015
|
Standard Test Method for Seal Strength of Flexible Barrier Materials |
ASTM D 7056 : 2007 : R2018
|
Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams |
ASTM E 2627 : 2013 : R2019
|
Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials |
ASTM C 721 : 2020
|
Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability |
ASTM E 1450 : 2016
|
Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM E 292 : 2018
|
Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials |
ASTM D 5017 : 2017
|
Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
ASTM G 109 : 2007 : R2013
|
Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
ASTM G 123 : 2000 : R2015
|
Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution |
ASTM D 4883 : 2018
|
Standard Test Method for Density of Polyethylene by the Ultrasound Technique |
ASTM F 2961 : 2015
|
Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter |
ASTM D 7454 : 2019
|
Standard Test Method for Determination of Vibrated Bulk Density of Cal |