ASTM E 772 : 2015
Current
Current
The latest, up-to-date edition.
Standard Terminology of Solar Energy Conversion
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
03-04-2015
1.1This terminology pertains to the conversion of solar energy into other forms of energy by various means, including thermal absorption (i.e., solar thermal) and the photovoltaic effect (i.e., photovoltaics).
1.2This terminology also pertains to instrumentation used to measure solar radiation.
1.3This terminology also pertains to glass for solar energy applications.
1.4Fundamental terms associated with electromagnetic radiation that are indicates as derived units in Standard IEEE/ASTM SI 10 are not repeated in this terminology.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
| Committee |
E 44
|
| DocumentType |
Reference Material
|
| Pages |
15
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| ASTM E 973 : 2016 : R2020 | Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell |
| ASTM E 3006 : 2020 | Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus |
| ASTM E 1056 : 2013 : R2021 | Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings |
| ASTM G 151 : 2019 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
| ASTM G 179 : 2004 : R2019 | Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests |
| ASTM E 1802 : 2012 : R2018 | Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules |
| ASTM E 971 : 2011(R2019) | Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation |
| ASTM G 167 : 2015 | Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer |
| ASTM C 1589/C1589M : 2018 | Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
| ASTM D 1435 : 2020 | Standard Practice for Outdoor Weathering of Plastics |
| ASTM E 2766 : 2013 : R2019 | Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs |
| ASTM G 222 : 2021 | Standard Practice for Estimation of UV Irradiance Received by Field-Exposed Products as a Function of Location |
| ASTM E 1175 : 1987 : R2015 | Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere |
| ASTM G 113 : 2016 | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM E 1038 : 2010 : R2019 | Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls |
| ASTM E 948 : 2016 : R2020 | Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight |
| ASTM E 903 : 2020 | Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres |
| ASTM G 130 : 2012 : R2020 | Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer |
| ASTM G 207 : 2011 : R2019 : EDT 1 | Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers |
| ASTM G 214 : 2016 | Standard Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications |
| ASTM E 781 : 1986 : R2015 | Standard Practice for Evaluating Absorptive Solar Receiver Materials When<brk/> Exposed to Conditions Simulating Stagnation in Solar<brk/> Collectors With Cover Plates |
| ASTM E 972 : 1996 : R2021 | Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight |
| ASTM E 2908 : 2012 : R2018 | Standard Guide for Fire Prevention for Photovoltaic Panels, Modules, and Systems |
| ASTM E 1830 : 2015 : R2019 | Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules |
| ASTM E 881 : 1992 : R2015 | Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode |
| ASTM G 7/G7M : 2021 | Standard Practice for Natural Weathering of Materials |
| ASTM E 861 : 2013 : R2021 | Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors |
| ASTM E 905 : 1987 : R2021 | Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors |
| ASTM E 3010 : 2015 : R2019 : EDT 1 | Standard Practice for Installation, Commissioning, Operation, and Maintenance Process (ICOMP) of Photovoltaic Arrays |
| ASTM E 2939 : 2013 : R2018 | Standard Practice for Determining Reporting Conditions and Expected Capacity for Photovoltaic Non-Concentrator Systems |
| ASTM E 816 : 2015 | Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers |
| ASTM D 4364 : 2013 | Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight |
| ASTM G 138 : 2012 : R2020 : EDT 1 | Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance |
| ASTM G 173 : 2003 : R2020 | Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface |
| ASTM E 2848 : 2013 : R2018 | Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance |
| ASTM G 183 : 2015 | Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers |
| ASTM E 1143 : 2005 : R2019 | Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter |
| ASTM E 824 : 2010 : R2018 : EDT 1 | Standard Test Method for Transfer of Calibration From Reference to Field Radiometers |
| ASTM D 5272 : 2008 : R2013 | Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics |
| ASTM E 2047 : 2010 : R2019 | Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays |
| ASTM E 744 : 2007 : R2015 | Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications |
| ASTM G 177 : 2003 : R2020 | Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface |
| ASTM E 2685 : 2015 : R2019 | Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test |
| ASTM E 1799 : 2012 : R2018 | Standard Practice for Visual Inspections of Photovoltaic Modules |
| ASTM E 683 : 1991 : R2021 | Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings |
| ASTM E 1040 : 2010 : R2020 | Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells |
| ASTM E 1597 : 2010 : R2019 | Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments |
| ASTM G 197 : 2014 : R2021 | Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces |
| ASTM E 927 : 2019 | Standard Classification for Solar Simulators for Electrical Performance Testing of Photovoltaic Devices |
| ASTM E 2481 : 2012 : R2018 | Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules |
| ASTM G 213 : 2017 | Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers |
| ASTM C 1651 : 2008 | Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass |
| ASTM D 4865 : 2019 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM D 4865 : 2009 : R2014 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM F 1863 : 2010 | Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts |
| ASTM E 1462 : 2000 : R2006 | Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules |
| ASTM E 1036 : 2015 : R2019 | Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM F 1863 : 2016 : R2021 | Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts |
| ASTM E 2527 : 2015 | Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight |
| ASTM E 2236 : 2010 | Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules |
| ASTM C 1048 : 1997 : REV B | Standard Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM E 2236 : 2005 | Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules |
| ASTM E 1171 : 1999 | Standard Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
| ASTM D 1003 : 2007 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 4865 : 2009 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM F 1863 : 1998 | Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts |
| ASTM G 173 : 2003 | Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface |
| ASTM D 1003 : 2013 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM G 197 : 2014 | Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces |
| ASTM E 1036 : 2015 | Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM D 7236 : 2006 | Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
| ASTM G 197 : 2014 : R2021 | Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces |
| ASTM D 7236 : 2016 : REV A | Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
| ASTM E 1021 : 2015 : R2019 | Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices |
| ASTM E 1036 : 2008 | Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM E 1362 : 2015 | Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells |
| ASTM E 1125 : 2010 : R2015 | Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum |
| ASTM D 1245 : 2017 | Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
| ASTM D 5544 : 2016 | Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water |
| ASTM C 1048 : 2018 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM D 7236 : 2007 : R2013 | Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
| ASTM E 2527 : 2006 | Standard Test Method for Rating Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight |
| ASTM E 1125 : 2016 | Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum |
| ASTM E 1036 : 2012 | Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM E 1021 : 2012 | Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices |
| ASTM D 1003 : 2007 : EDT 1 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM E 1362 : 1999 | Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells |
| ASTM D 1245 : 1984 : R2007 | Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
| ASTM D 1245 : 1984 : R1999 | Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
| ASTM E 1171 : 2009 | Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
| ASTM E 1021 : 2006 | Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices |
| ASTM E 1125 : 2005 | Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum |
| ASTM E 2527 : 2009 | Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight |
| ASTM F 1863 : 2016 | Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts |
| ASTM E 1171 : 2015 | Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
| ASTM E 1125 : 2010 | Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum |
| ASTM E 1362 : 2005 | Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells |
| ASTM E 1171 : 2015 : R2019 | Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
| ASTM C 1048 : 2012 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM D 1003 : 2011 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM E 1362 : 2015 : R2019 | Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells |
| ASTM D 7236 : 2016 | Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
| ASTM E 1171 : 2001 | Standard Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
| ASTM E 1036 : 2002 : R2007 | Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM D 4865 : 1998 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM E 2236 : 2010 : R2015 | Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules |
| ASTM C 1048 : 2004 | Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM D 5544 : 2011 | Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water |
| ASTM D 1003 : 2021 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 1245 : 1984 : R2003 | Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
| ASTM E 2236 : 2005 : REV A | Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules |
| ASTM D 7236 : 2016 : REV A : R2021 | Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
| ASTM D 5544 : 2005 | Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water |
| ASTM D 5544 : 1994 : R1999 : EDT 1 | Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water |
| ASTM D 1245 : 2008 | Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
| ASTM E 1125 : 2016 : R2020 | Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum |
| ASTM E 1021 : 1995 | Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells |
| ASTM E 2236 : 2010 : R2019 | Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules |
| ASTM E 1362 : 2010 | Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells |
| ASTM D 1003 : 2000 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM E 1021 : 2015 | Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices |
| ASTM D 7236 : 2007 | Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
| ASTM E 1462 : 2000 | Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules |
| ASTM E 1462 : 2012 : R2018 | Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules |
| ASTM C 1651 : 2011 | Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass |
| ASTM E 2236 : 2002 | Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules |
| ASTM D 1003 : 2011 : EDT 1 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM E 1462 : 2012 | Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules |
| ASTM D 1245 : 2011 | Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
| ASTM C 1048 : 2012 : EDT 1 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM E 1171 : 2004 | Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
| ASTM C 1651 : 2011 : R2018 | Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass |
| ASTM E 2527 : 2015 : R2019 | Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight |
| ASTM E 1036 : 2002 | Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM E 1125 : 1999 | Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum |
| ASTM D 1003 : 1992 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 5544 : 1994 : R2004 | Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water |
$135.86
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.