ASTM E 831 : 2019
Current
The latest, up-to-date edition.
Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
Hardcopy , PDF
English
01-04-2019
This test method determines the technical coefficient of linear thermal expansion of solid materials using thermomechanical analysis techniques.
1.1This test method determines the technical coefficient of linear thermal expansion of solid materials using thermomechanical analysis techniques.
1.2This test method is applicable to solid materials that exhibit sufficient rigidity over the test temperature range such that the sensing probe does not produce indentation of the specimen.
1.3The recommended lower limit of coefficient of linear thermal expansion measured with this test method is 5 μm/(m·°C). The test method may be used at lower (or negative) expansion levels with decreased accuracy and precision (see Section 11).
1.4This test method is applicable to the temperature range from −120 °C to 900 °C. The temperature range may be extended depending upon the instrumentation and calibration materials used.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Committee |
E 37
|
DocumentType |
Test Method
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
ASTM E 1142 : 2022 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 473 : 2022 : REV D | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1363 : 1997 : EDT 1 | Standard Test Method for Temperature Calibration of Thermomechanical Analyzers |
ASTM E 1142 : 2011 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2012 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 228 : 2017 | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
ASTM E 473 : 2022 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1142 : 1997 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 473 : 2021 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1142 : 2013 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 2113 : 2023 | Standard Test Method for Length Change Calibration of Thermomechanical Analyzers |
ASTM E 2113 : 2000 | Standard Test Method for Length Change Calibration of Thermomechanical Analyzers |
ASTM E 1142 : 2004 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2022 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2022 : REV C | Standard Terminology Relating to Thermophysical Properties |
ASTM E 2113 : 2002 | Standard Test Method for Length Change Calibration of Thermomechanical Analyzers |
ASTM E 473 : 2022 : REV B | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1142 : 2006 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 473 : 2018 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1142 : 2015 : R2020 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2021 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1363 : 2016 | Standard Test Method for Temperature Calibration of Thermomechanical Analyzers |
ASTM E 2113 : 2009 | Standard Test Method for Length Change Calibration of Thermomechanical Analyzers |
ASTM E 473 : 2023 : REV A | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1363 : 2008 | Standard Test Method for Temperature Calibration of Thermomechanical Analyzers |
ASTM E 473 : 2022 : REV C | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1142 : 2007 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1363 : 2023 | Standard Test Method for Temperature Calibration of Thermomechanical Analyzers |
ASTM E 2113 : 2018 | Standard Test Method for Length Change Calibration of Thermomechanical Analyzers |
ASTM E 1142 : 2022 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2014 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1363 : 2018 | Standard Test Method for Temperature Calibration of Thermomechanical Analyzers |
ASTM E 1363 : 2003 | Standard Test Method for Temperature Calibration of Thermomechanical Analyzers |
ASTM E 1142 : 2014 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2023 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1363 : 2013 | Standard Test Method for Temperature Calibration of Thermomechanical Analyzers |
ASTM E 1142 : 2005 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2015 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 473 : 2021 : REV A | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 473 : 2023 : REV B | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 2113 : 2013 | Standard Test Method for Length Change Calibration of Thermomechanical Analyzers |
ASTM E 473 : 2022 : REV A | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 473 : 2023 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1142 : 2023 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2011 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2021 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 2113 : 2004 | Standard Test Method for Length Change Calibration of Thermomechanical Analyzers |
ASTM E 1142 : 2023 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 228 : 2022 | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.