Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM F 2083 : 2021

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Standard Specification for Knee Replacement Prosthesis (Withdrawn 2023)

Available format(s)

Hardcopy , PDF

Withdrawn date

03-02-2021

Language(s)

English

Published date

03-02-2021

1.1This specification is intended to cover all the widely used generic types of knee replacement prostheses used to provide functioning articulation. This includes total knee replacement (TKR) and unicondylar knee replacement (UKR) prostheses of both fixed and mobile bearing varieties, and for primary or revision surgeries. Although a patellar component may be considered an integral part of a TKR, the detailed description of this component is excluded here since it is provided in Specification F1672.

1.2Included within the scope of this specification are replaceable components of modular designs, for example, tibial articulating surfaces and all components labeled for, or capable of, being used with cement, regardless of whether the same components can also be used without cement.

1.3This specification is intended to provide basic descriptions of material and prosthesis geometry. Additionally, those characteristics determined to be important to in-vivo performance of the prosthesis are defined. However, compliance with this specification does not itself define a device that will provide adequate clinical performance.

1.4Excluded from the scope are hemiarthroplasty devices that replace only the femoral or tibial surface, but not both; and patellofemoral prostheses. Also excluded are devices designed for custom applications.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 04
DocumentType
Standard
Pages
10
PublisherName
American Society for Testing and Materials
Status
Withdrawn
Supersedes

ASTM F 3140 : 2023 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements
ASTM F 2777 : 2023 Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
ASTM F 3210 : 2022 : EDT 1 Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions
ASTM F 2665 : 2021 Standard Specification for Total Ankle Replacement Prosthesis
ASTM F 3495 : 2023 Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components
ASTM F 2777 : 2016 Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
ASTM F 3140 : 2017 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements
ASTM F 1223 : 2020 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1800 : 2019 : EDT 1 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F 2722 : 2015 Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops

ASTM F 746 : 2004 : R2014 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
ASTM F 562 : 2022 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
ASTM F 2003 : 2002 : R2022 Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene After Gamma Irradiation in Air
ASTM F 2503 : 2023 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ASTM F 75 : 2023 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
ASTM F 1472 : 2023 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 75 : 2018 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
ASTM F 562 : 2013 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
ASTM F 2003 : 2002 : R2015 Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
ASTM F 2503 : 2023 : EDT 1 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ASTM F 3141 : 2023 Standard Guide for Total Knee Replacement Loading Profiles
ASTM F 86 : 2013 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
ASTM F 2722 : 2021 Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
ASTM F 1377 : 2021 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538)
ASTM F 451 : 2016 Standard Specification for Acrylic Bone Cement
ASTM F 1472 : 2000 Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications
ASTM F 1108 : 2014 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 2724 : 2021 Standard Test Method for Evaluating Mobile Bearing Knee Dislocation
ASTM F 451 : 2021 Standard Specification for Acrylic Bone Cement
ASTM F 1223 : 2003 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM E 739 : 2023 Standard Guide for Statistical Analysis of Linear or Linearized Stress-Life (<emph type="bdit">S-N</emph>) and Strain-Life (ε-<emph type="bdit" >N</emph>) Fatigue Data (Withdrawn 2024)
ASTM F 136 : 1998 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy (UNS R56401) for Surgical Implant Applications
ASTM F 3141 : 2017 : REV A Standard Guide for Total Knee Replacement Loading Profiles
ASTM F 1377 : 2013 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
ASTM F 1472 : 2020 : REV A Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 2503 : 2020 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ASTM F 2723 : 2021 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
ASTM F 1814 : 2015 Standard Guide for Evaluating Modular Hip and Knee Joint Components
ASTM F 2723 : 2013 : REV A Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
ASTM F 648 : 2014 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM E 739 : 2010 : R2015 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (<emph type="bdit">S-N</emph>) and Strain-Life (ε-<emph type="bdit" >N</emph>) Fatigue Data
ASTM F 981 : 2004 : R2016 Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone
ASTM F 746 : 2004 : R2021 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
ASTM F 90 : 2023 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
ASTM F 648 : 2021 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F 86 : 2021 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
ASTM F 3140 : 2023 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements
ASTM F 2777 : 2023 Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
ASTM F 2724 : 2008 : R2014 Standard Test Method for Evaluating Mobile Bearing Knee Dislocation
ASTM F 1108 : 2021 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 136 : 2013 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
ASTM F 136 : 2013 : R2021 : EDT 1 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
ASTM F 1814 : 2022 Standard Guide for Evaluating Modular Hip and Knee Joint Components
ASTM F 981 : 2023 Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices
ASTM F 90 : 2014 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
ASTM F 2722 : 2015 Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops

View more information
$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more