Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-03-2017

Publisher

American Society for Testing and Materials

This specification covers the chemical, mechanical, and metallurgical requirements for four grades of unalloyed titanium strips, sheets, plates, bars, billets, forgings, and wires used for the manufacture of surgical implants.

1.1This specification covers the chemical, mechanical, and metallurgical requirements for four grades of unalloyed titanium strip, sheet, plate, bar, billet, forging, and wire used for the manufacture of surgical implants.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	F 04
DocumentType	Standard
Pages	6
ProductNote	Reconfirmed 2017
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM F 67 : 2013

ASTM E 1447 : 2001	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM E 1409 : 2013	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM E 1941 : 2010 : R2016	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM E 2371 : 2013	Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E 8/E8M : 2024	Standard Test Methods for Tension Testing of Metallic Materials
ASTM B 381 : 2013 : R2019	Standard Specification for Titanium and Titanium Alloy Forgings
ASTM E 1447 : 2022	Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
ASTM E 8/E8M : 2016 : REV A : EDT 1	Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 29 : 2013 : R2019	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 1941 : 2010	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM B 348 : 2013 : REDLINE	Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM B 265 : 2015 : REDLINE	Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM E 8/E8M : 2021	Standard Test Methods for Tension Testing of Metallic Materials
ASTM B 348 : 2005 : EDT 1	Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM E 1409 : 2004	Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E 29 : 2002	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 1447 : 1992 : R1996	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM E 1409 : 2013 : R2021	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM E 1409 : 2005	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ISO 6892:1998	Metallic materials Tensile testing at ambient temperature
IEEE/ASTM SI_10-2010	American National Standard for Metric Practice
ASTM E 1447 : 2004	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM E 8/E8M : 2022	Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 1409 : 2013 : REDLINE	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
SAE AMS 2631 : 2011	ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE
ASTM E 1447 : 2009	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E 2626 : 2008	Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
SAE AMS 2249 : 2013	CHEMICAL CHECK ANALYSIS LIMITS, TITANIUM AND TITANIUM ALLOYS
ASTM E 1941 : 2004	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
ASTM F 981 : 2004 : R2016	Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone
ASTM B 265 : 2005 : EDT 1	Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM E 2371 : 2004	Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry (Withdrawn 2013)
ASTM E 1447 : 2009 : R2016	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ISO 5832-2:1999	Implants for surgery Metallic materials Part 2: Unalloyed titanium
ISO 9001:2015	Quality management systems — Requirements
ASTM E 290 : 2022	Standard Test Methods for Bend Testing of Material for Ductility
ASTM B 381 : 2021	Standard Specification for Titanium and Titanium Alloy Forgings
ASTM E 2626 : 2008 : EDT 1	Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals (Withdrawn 2017)
ASTM B 381 : 2005 : EDT 1	Standard Specification for Titanium and Titanium Alloy Forgings
ASTM E 1409 : 1997	Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E 1409 : 2008	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E 290 : 2014 : REDLINE	Standard Test Methods for Bend Testing of Material for Ductility
SAE AMS 2380 : 2017	APPROVAL AND CONTROL OF PREMIUM-QUALITY TITANIUM ALLOYS
ASTM B 381 : 2013 : REDLINE	SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS
ASTM E 1941 : 1998	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
ASTM E 2371 : 2021 : REV A	Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E 8/E8M : 2016-09	TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
ASTM E 290 : 2014	Standard Test Methods for Bend Testing of Material for Ductility
ASTM E 1447 : 2005	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM F 981 : 2023	Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices
ASTM E 29 : 2022	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 2371 : 2021	Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)