BIS IS 1363-3 : 2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64)
Superseded date
14-11-2019
Published date
12-01-2013
Publisher
NATIONAL FOREWORD
1. Scope
2. Normative References
3. Dimensions
4. Specifications and reference standards
5. Designation
Bibliography
Describes the characteristics of hexagon nuts with threads from M5 up to and including M64 and product grade C.
| Committee |
BPD 33
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 4034:2012 | Identical |
| BIS IS 2081 : 1998(R2003) | AUTOMOTIVE VEHICLES - TAPER TERMINAL CABLE CONNECTORS FOR BATTERIES - SPECIFICATION |
| BIS IS 10386-11 : 2012 | SAFETY CODE FOR CONSTRUCTION, OPERATION AND MAINTENANCE OF RIVER VALLEY PROJECTS - PART 11: UNDERGROUND EXCAVATION |
| BIS IS 14106 : 1996(R2017) | DIRECT ACTION HANDPUMPS - SPECIFICATION |
| BIS IS 2486-2 : 1989(R2009) | INSULATOR FITTINGS FOR OVERHEAD POWER LINES WITH NOMINAL VOLTAGE GREATER THAN 1000 V - SPECIFICATION - PART 2: DIMENSIONAL REQUIREMENTS |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BIS IS 5624 : 1993(R2008) | FOUNDATION BOLTS - SPECIFICATION |
| BIS IS 807 : 2006 | DESIGN, ERECTION AND TESTING (STRUCTURAL PORTION) OF CANES AND HOISTS - CODE OF PRACTICE |
| BIS IS 15998 : 2013 | CAST IRON, SPHEROIDAL/NODULAR CAST IRON AND CAST STEEL SCREW-DOWN STOP VALVES AND STOP AND CHECK VALVES FOR MARINE APPLICATIONS - SPECIFICATION |
| BIS IS 14846 : 2000 AMD 3 2010 | SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) - SPECIFICATION |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| BIS IS 14962-1 : 2001 AMD 1 2013 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLE AND BASIC DATA |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread Product grades A and B |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 7412:1984 | Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) Product grade C Property classes 8.8 and 10.9 |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 7417:1984 | Hexagon nuts for structural bolting Style 2, hot-dip galvanized (oversize tapped) Product grade A Property class 9 |
| ISO 4775:1984 | Hexagon nuts for high-strength structural bolting with large width across flats Product grade B Property classes 8 and 10 |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| BIS IS 4218-3 : 1999 AMD 1 2012 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 3: BASIC DIMENSIONS |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread Product grades A and B |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| BIS IS 8536 : 1987(R2003) | FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESIGNATION OF DIMENSIONS |
| ISO 4015:1979 | Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| BIS IS 1367-2 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 2: TOLERANCES FOR FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 7414:1984 | Hexagon nuts for structural bolting with large width across flats, style 1 Product grade B Property class 10 |
| ISO 7413:1984 | Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) Product grades A and B Property classes 5, 6 and 8 |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) Product grade B |
| BIS IS 1367-17 : 2005 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 17: INSPECTION, SAMPLING AND ACCEPTANCE PROCEDURE |
| ISO 15071:2011 | Hexagon bolts with flange Small series Product grade A |
| ISO 7411:1984 | Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) Product grade C Property classes 8.8 and 10.9 |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| BIS IS 1367-6 : 1994(R2015) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 6: MECHANICAL PROPERTIES AND TEST METHODS FOR NUTS WITH SPECIFIED PROOF LOADS |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| ISO 4018:2011 | Hexagon head screws Product grade C |
| BIS IS 1367-11 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 11: ELECTROPLATED COATINGS |
| ISO 4162:2012 | Hexagon bolts with flange Small series Product grade A with driving feature of product grade B |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.