Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BIS IS/IEC 60079-15 : 2005

Current
Current

The latest, up-to-date edition.

ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 15: CONSTRUCTION, TEST AND MARKING OF TYPE OF PROTECTION 'N' ELECTRICAL APPARATUS
Published date

12-01-2013

NATIONAL FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Temperatures
6 Requirements for electrical apparatus
7 Non-metallic enclosures and non-metallic parts of
   enclosures
8 Enclosures containing light metals
9 Fasteners
10 Interlocking devices
11 Brushings
12 Materials used for cementing
13 Ex components
14 Connection facilities and terminal compartments
15 Connection facilities for earthing or bonding
   conductors
16 Entries into enclosures
17 Supplementary requirements for non-sparking
   electrical machines
18 Supplementary requirements for switchgear
19 Supplementary requirements for non-sparking
   fuses and fuse assemblies
20 Supplementary requirements for non-sparking
   plugs and sockets
21 Supplementary requirements for non-sparking
   luminaries
22 Supplementary requirements for apparatus
   incorporating non-sparking cells and batteries
23 Supplementary requirements for non-sparking
   low power apparatus
24 Supplementary requirements for non-sparking
   current transformers
25 Other electrical apparatus
26 General supplementary requirements for apparatus
   producing arcs, sparks or hot surfaces
27 Supplementary requirements for enclosed-break
   devices and non-incentive components producing
   arcs, sparks or hot surfaces
28 Supplementary requirements for hermetically sealed
   devices producing arcs, sparks or hot surfaces
29 Supplementary requirements for sealed devices or
   encapsulated devices producing arcs, sparks or
   hot surfaces
30 Supplementary requirements for energy-limited
   apparatus and circuits producing arcs, sparks or
   hot surfaces
31 Supplementary requirements for restricted-breathing
   enclosures protecting apparatus producing arcs,
   sparks or hot surfaces
32 General information on verification and tests
33 Type tests
34 Routine verifications and tests
35 Marking
36 Documentation
37 Instructions

Defines requirements for the construction, testing and marking for Group II electrical apparatus with type of protection, 'n' intended for use in explosive gas atmospheres.

Committee
ETD 22
DocumentType
Standard
PublisherName
Bureau of Indian Standards
Status
Current

BIS SP 72 : 2010(R2014) NATIONAL LIGHTING CODE 2010
BIS IS/IEC 60079-25 : 2010 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
BIS IS/IEC 60079-0 : 2011 EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
BIS IS/IEC 60079-18 : 2009 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'

IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 61347-2-3:2011+AMD1:2016 CSV Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
BIS IS 12063 : 1987(R2004) CLASSIFICATION OF DEGREES OF PROTECTION PROVIDED BY ENCLOSURES OF ELECTRICAL EQUIPMENT
IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 61048:2006+AMD1:2015 CSV Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
BIS IS 9206 : 1979 AMD 5 2014 DIMENSIONS OF CAPS FOR TUNGSTEN FILAMENT GENERAL SERVICE ELECTRIC LAMPS
IEC 60998-2-4:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
IEC 61347-2-9:2012 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
IEC 61347-1:2015 RLV Lamp controlgear - Part 1: General and safety requirements
BIS IS 1258 : 2005(R2015) BAYONET LAMP HOLDERS
IEC 60400:2017 Lampholders for tubular fluorescent lamps and starterholders
BIS IS 8187 : 1976(R2016) D-TYPE FUSES
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters)
IEC 61347-2-4:2000 Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting
BIS IS/IEC 60079-1 : 2007 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BIS IS 5780 : 2002 AMD 1 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - INTRINSIC SAFETY "I" - SPECIFICATION
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
BIS IS 10322-5-1 : 2012 LUMINAIRES - PART 5: PARTICULAR REQUIREMENTS - SECTION 1: FIXED GENERAL PURPOSE LUMINAIRES
BIS IS 12449-2 : 1988(R2003) SPECIFICATION FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) - PART 2: PERFORMANCE REQUIREMENTS
IEC TS 60034-25:2014 Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
IEC 61347-2-7:2011+AMD1:2017 CSV Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
BIS IS 2418-1 : 1977 AMD 8 2012 SPECIFICATION FOR TUBULAR FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICE - PART 1: REQUIREMENTS AND TESTS
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60269-3:2010+AMD1:2013 CSV Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
BIS IS 10276-2 : 1982(R2003) EDISON SCREW LAMPHOLDERS - PART 2: STANDARD DATA SHEETS FOR LAMP HOLDERS AND GAUGES
EN 50262 : 1998 AMD 2 2004 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
BIS IS/IEC 60079-0 : 2011 EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
BIS IS 10322-5-3 : 2012(R2017) LUMINAIRES - PART 5: PARTICULAR REQUIREMENTS - SECTION 3: LUMINAIRES FOR ROAD AND STREET LIGHTING
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
BIS IS 10322-2 : 1982(R2005) SPECIFICATION FOR LUMINAIRES - PART 2: CONSTRUCTIONAL REQUIREMENTS
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
BIS IS 15382-1 : 2014 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
IEC 61347-2-2:2011 Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
IEC 60927:2007+AMD1:2013 CSV Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements
BIS IS/IEC 60079-17 : 2007 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
BIS IS 2824 : 2007 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
IEC 60155:1993 Glow-starters for fluorescent lamps
BIS IS 10276-1 : 1982(R2003) EDISON SCREW LAMPHOLDERS - PART 1: REQUIREMENTS AND TESTS
BIS IS 2215 : 2006(R2015) STARTERS FOR FLUORESCENT LAMPS
BIS IS 10322-5-2 : 2012(R2017) LUMINAIRES - PART 5: PARTICULAR REQUIREMENTS - SECTION 2: RECESSED LUMINAIRES
BIS IS 4691 : 1985(R2004) DEGREES OF PROTECTION PROVIDED BY ENCLOSURE FOR ROTATING ELECTRICAL MACHINERY
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
BIS IS 9000-7-1 : 2006 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC AND ELECTRICAL ITEMS - PART 7: IMPACT TEST - SECTION 1: SHOCK
BIS IS 3324 : 1982(R2008) HOLDERS FOR STARTERS FOR TUBULAR FLUORESCENT LAMPS
IEC 61347-2-8:2000+AMD1:2006 CSV Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61184:2017 Bayonet lampholders
BIS IS 1569 : 1976(R2001) CAPACITORS FOR USE IN TUBULAR FLUORESCENT HIGH PRESSURE MERCURY AND LOW PRESSURE SODIUM VAPOUR DISCHARGE LAMP CIRCUIT
BIS IS 10322-1 : 2014 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more