BS 2782-3 Method 335A:1978
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Methods of testing plastics. Mechanical properties Determination of flexural properties of rigid plastics
Hardcopy
15-10-1993
English
03-05-1985
Lays down a method for determining flexural properties of rigid non-reinforced and fibre-reinforced plastic materials, in the form of rectangular bars of standard or non-standard dimensions, moulded directly or cut from sheets or other shapes. Applies only to a simple, freely supported beam, loaded at mid-span.
Committee |
PRI/21
|
DevelopmentNote |
Supersedes BS 2782-3.335A(1976) (07/2004)
|
DocumentType |
Standard
|
Pages |
1
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
BS 7008-1:1988 | Acquisition and presentation of comparable data for basic properties of plastics. Method for single-point data |
ENA TS 12-3 : ISSUE 3 1992 | OUTDOOR METER CUPBOARDS |
BS 3905:1984 | Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, primarily for use in mines |
BS 6319-3:1983 | Testing of resin compositions for use in construction. Method for measurement of flexural strength |
BS 5734-4:1980 | Polyester moulding compounds for electrical and other purposes Specification for sheet moulding compounds for electrical purposes |
BS 5734-2:1980 | Polyester moulding compounds for electrical and other purposes Specification for dough moulding compounds for electrical purposes |
BS 6444-1:1990 | Cardiovascular implants Methods of test for heart valve substitutes and requirements for their packaging and labelling |
BS 2572:1990 | Specification for phenolic laminated sheet and epoxy cotton fabric laminated sheet |
BS 7413:1991 | Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type A |
BS 3816:1989 | Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies |
BS 3396-3:1987 | Woven glass fibre fabrics for plastics reinforcement Specification for finished fabrics for use with polyester resin systems |
BS 771:1992 | Specification for phenolic moulding materials |
BS 5139:1991 | Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion |
BS 6319-3:1990 | Testing of resin and polymer/cement compositions for use in construction Methods for measurement of modulus of elasticity in flexure and flexural strength |
BS 3412:1992 | Methods of specifying general purpose polyethylene materials for moulding and extrusion |
BS 4936:1987 | Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials |
BS 5734-4:1990 | Polyester moulding compounds for electrical and other purposes Specification for sheet moulding compounds for electrical purposes |
BS 1493:1987 | Method of specifying general purpose polystyrene (PS) moulding and extrusion materials |
BS 1322:1992 | Specification for aminoplastic moulding materials |
BS 1322:1981 | Specification for aminoplastic moulding materials |
BS 5734-1:1990 | Polyester moulding compounds for electrical and other purposes Methods of test |
BS 3953:1990 | Specification for synthetic resin bonded woven glass fabric laminated sheet |
BS 5501-1:1977 | Electrical apparatus for potentially explosive atmospheres General requirements |
BS 5734-2:1990 | Polyester moulding compounds for electrical and other purposes Specification for dough moulding compounds for electrical purposes |
BS 3496:1989 | Specification for E glass fibre chopped strand mat for reinforcement of polyester and other liquid laminating systems |
BS 5620:1979 | Specification for 200 A flameproof restrained and bolted plugs and sockets for voltages not exceeding 1100 V, primarily for use in mining |
BS 7008-2:1988 | Acquisition and presentation of comparable data for basic properties of plastics Method for multipoint data |
BS 2782-9 Method 902A:1977 | Methods of testing plastics. Sampling and test specimen preparation Compression moulding test specimens of thermosetting materials |
BS 6236-2:1988 | Electrical insulating materials based on mica Methods of test |
BS 771-2:1980 | Phenolic moulding materials Specification for physical properties of type L2 material |
BS 2782-3 Method 336B:1978 | Methods of testing plastics. Mechanical properties Determination of deflection in bend under an applied force |
BS 5734-3:1980 | Polyester moulding compounds for electrical and other purposes Specification for dough moulding compounds for mechanical purposes |
BS 5664-2.1(1979) : 1979 | SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION - METHODS OF TEST |
ESI 12-3 : ISSUE 3 | OUTDOOR METER CUPBOARDS |
BS 6091-2:1987 | Vulcanized fibre for electrical purposes Methods of test |
BS 3454:1984 | Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors), primarily for use in mines |
BS 5734-5:1980 | Polyester moulding compounds for electrical and other purposes Specification for sheet moulding compounds for mechanical purposes |
BS 6673:1986 | Specification for polyester glass mat sheets for electrical purposes |
BS 7019:1989 | Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines |
BS 6128-1:1981 | Industrial laminated rods and tubes based on thermosetting resins Classification and methods of test |
BS 7414:1991 | Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B |
BS 5125:1990 | Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines |
BS 3454:1995 | Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines |
BS 3126:1987 | Method of specifying toughened polystyrene (SB) moulding and extrusion materials |
BS 3794-1:1986 | Decorative, high pressure laminates (HPL) based on thermosetting resins Specification for performance |
BS 4935:1989 | Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.