DEFSTAN 61-12(PT7)/2(1986) : 1986
|
WIRES, CORDS, AND CABLES, ELECTRICAL - METRIC UNITS - PART 7: CORDS, ELECTRICAL GENERAL REQUIREMENTS
|
DEFSTAN 02-514/2(2008) : 2008
|
GUIDE TO CABLE ENTRY, TERMINATION AND JUNCTION COMPONENTS FOR EQUIPMENT
|
BS 8436:2004
|
Electric cables. 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
|
DEFSTAN 61-12(PT31)/2(2006) : 2006
|
WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 31: SHEATHS - LIMITED FIRE HAZARD
|
DEFSTAN 61-12(PT27)/3(2008) : 2008
|
WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 27: CABLES AND WIRES ELECTRICAL FOR POWER CONNECTIONS TO MOBILE EQUIPMENT
|
BS 6231:2006
|
Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring
|
BS 6231:1998
|
Specification for PVC-insulated cables for switchgear and controlgear wiring
|
BS 6195:2006
|
Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads
|
BS 6622:2007
|
Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods
|
BS 7655-10.1(1997) : 1997
|
SPECIFICATION FOR INSULATING AND SHEATHING MATERIALS FOR CABLES - POLYETHYLENE SHEATHING COMPOUNDS - THERMOPLASTIC MEDIUM DENSITY POLYETHYLENE (MDPE) SHEATHING COMPOUND
|
BS 7629-1:1997
|
Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire Multicore cables
|
BS 6007:2000
|
Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
|
BS 6500:2000
|
Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments
|
BS 6883:1999
|
Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
|
BS 7540-3:2005
|
Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V National standard cables not included in HD 21 and HD 22
|
BS 7540-2:2005
|
Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V Harmonized cable types from HD 21 and HD 22
|
BS 4553-3:1998
|
Specification for 600/1000 V single-phase split concentric electric cables Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
|
BS 7889:1997
|
Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V
|
BS 7835:2000
|
Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire
|
BS 7870-1:1996
|
LV and MV polymeric insulated cables for use by distribution and generation utilities General
|
BS 7540-1:2005
|
Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V General guidance
|
BS 7888-1:1998
|
LV and MV accessories for power cables with rated voltage from 0.6/1 kV (<i>U</i><sub>m</sub>=1.2 kV) up to and including 20.8/36 kV (<i>U</i><sub>m</sub>=42 kV) General
|
BS 7211:1998
|
Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire
|
BS 4553-2:1998
|
Specification for 600/1000 V single-phase split concentric electric cables Cables having thermosetting insulation
|
BS 4553-1:1998
|
Specification for 600/1000 V single-phase split concentric electric cables Cables having PVC insulation
|
BS 6469-98.1:1996
|
Insulating and sheathing materials of electric cables. Additional harmonized non-electrical test methods Test for TMPU sheath
|
BS 7629-2:1997
|
Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multipair cables
|
BS 7917:1999
|
Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
|
BS 7919:2001
|
Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
|
BS 7922:2004
|
Electric cables. Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (<i>U</i><sub>m</sub> = 420 kV). Requirements and test methods
|
BS 6004:1995
|
Specification for PVC-insulated cables (non-armoured) for electric power and lighting
|
BS 638-4:1996
|
Arc welding power sources, equipment and accessories Specification for welding cables
|
BS 6346:1997
|
Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
|
BS 6004:2000
|
Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring
|
BS 7923:2004
|
Electric cables. Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (<i>U</i><sub>m</sub> = 300 kV). Requirements and test methods
|
BS 7912:2001
|
Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (<i>U</i><sub>m</sub>=72.5 kV) to 132kV (<i>U</i><sub>m</sub>=145kV). Requirements and test methods
|
BS 7846:2000
|
Electric cables. 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
|
BS 6007:2006
|
Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
|
BS 7540:1994
|
Guide to use of cables with a rated voltage not exceeding 450/750 V
|