BS 5214-1:1975
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Specification for testing machines for rubbers and plastics Tensile, flexural and compression machines
Hardcopy , PDF
15-09-1995
English
30-05-1975
Co-operating organizations
Foreword
Specification
1 Scope
2 References
3 Definitions
4 Designation of machine accuracy
5 Design features
6 Types of force measuring system
7 Static force accuracy
8 Dynamic force accuracy
9 Measurement of elongation (deflection)
10 Rate of movement of driven grip
11 Machine stiffness
12 Stability
13 Certificate of verification
Tables
1 Grades of accuracy for force measurement
2 Grades of accuracy for elongation (deflection)
measurement
Figure
1 Machine accuracy gradings from BS 1610 : 1964
Requirements for systems for testing rubbers and plastics.
Committee |
PRI/22
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
BS 2782-3 Methods 326A to 326C:1977 | Methods of testing plastics. Mechanical properties Determination of tensile strength and elongation of plastics films |
BS 903-A56:1989 | Physical testing of rubber Determination of adhesion to wire cord |
BS 1204-2:1979 | Synthetic resin adhesives (phenolic and aminoplastic) for wood Specification for close-contact adhesives |
BS 3887-2:1985 | Pressure sensitive adhesive closing and sealing tapes for packaging Specification for aluminium foil, paper, plasticized PVC, polyester, polyethylene, woven cloth and filament reinforced tapes |
BS 5980:1980 | Specification for adhesives for use with ceramic tiles and mosaics |
DEFSTAN 80-154/1(1992) : 1992 AMD 1 1997 | ADHESIVE, NATURAL RUBBER-RESIN GRADE 1 & 2 |
DEFSTAN 80-121/2(1992) : 1992 | GENERAL PURPOSE CONTACT ADHESIVE, NON-FLAMMABLE |
BS 4781:1990 | Specification for pressure-sensitive adhesive plastics labels for permanent use |
BS 6826:1987 | Specification for linoleum and cork carpet sheet and tiles |
BS 2782-3 Method 345A:1979 | Methods of testing plastics. Mechanical properties Determination of compressive properties by deformation at constant rate |
BS 903-A61:1994 | Physical testing of rubber Determination of the frictional properties of rubber |
BS 2782-1:Methods 131C and 131D:1978 | Methods of testing plastics. Thermal properties Crushing strength after heating (heat resistance) of thermosetting moulding material. Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings |
BS 6209:1982 | Specification for solvent cement for non-pressure thermoplastics pipe systems |
BS 2782-3:Method 341A:1977 | Methods of testing plastics. Mechanical properties Determination of apparent interlaminar shear strength of reinforced plastics |
BS 903-A52:1986 | Physical testing of rubber Determination of ageing characteristics by measurement of stress at a given elongation |
DEFSTAN 80-130/1(1990) : INTERIM | ADHESIVE, TRANSFER, FLEXIBLE, PRESSURE-SENSITIVE |
BS 5350-C13:1980 | Methods of test for adhesives Climbing drum peel test |
BS 5350-C9:1978 | Methods of test for adhesives Floating roller peel test |
BS 903-A14:1992 | Physical testing of rubber Method for determination of modulus in shear or adhesion to rigid plates. Quadruple shear method |
BS 4346-3:1982 | Joints and fittings for use with unplasticized PVC pressure pipes Specification for solvent cement |
BS 5350-C9:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests Floating roller peel test |
BS 3289:1990 | Specification for textile carcase conveyor belting for use in underground mines (including fire performance) |
BS 903-A2:1989 | Physical testing of rubber Determination of tensile stress-strain properties |
BS 903-A40:1988 | Physical testing of rubber Determination of adhesion to rigid materials using conical shaped parts |
BS 5350-C5:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests Determination of bond strength in longitudinal shear |
BS 903-A24:1992 | Physical testing of rubber Guide to the determination of dynamic properties of rubbers |
BS 4443-1:1988 | Methods of test for flexible cellular materials Method 4. Measurement of cell count |
BS 5350-C13:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests Climbing drum peel test |
BS 903-A12:1975 | Physical testing of rubber Determination of the adhesion strength of vulcanized rubbers to fabrics (ply adhesion) |
BS 7491-1:1991 | Glass fibre reinforced plastics cisterns for cold water storage Specification for one-piece cisterns of capacity up to 500 L |
DEFSTAN 93-68/1(1995) : 1995 | POLYTETRAFLUOROETHYLENE, ETCHED (SHEET, TAPE AND COMPONENTS) |
BS 5350-C14:1979 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests 90° peel test for a rigid-to-rigid assembly |
BS 2782-3 Method 360B:1980 | Methods of testing plastics. Mechanical properties Determination of tear strength of sheet and sheeting (trouser tear method) |
BS 7044-2.1:1989 | Artificial sports surfaces. Methods of test Methods for determination of ball/surface interaction |
BS 4443-7:1983 | Methods of test for flexible cellular materials Method 17. Determination of tear strength of flexible cellular material with an integral skin |
BS 3887-1:1984 | Pressure sensitive adhesive closing and sealing tapes for packaging Specification for polypropylene, regenerated cellulose and unplasticized PVC tapes |
BS 5350-C15:1982 | Methods of test for adhesives Determination of bond strength in compressive shear |
BS 6319-7:1985 | Testing of resin and polymer/cement compositions for use in construction Method for measurement of tensile strength |
BS 3546-2:1993 | Coated fabrics for use in the manufacture of water penetration resistant clothing Specification for non-water vapour permeable coated fabrics |
BS 1204:1993 | Specification for type MR phenolic and aminoplastic synthetic resin adhesives for wood |
BS 5350-C11:1979 | Methods of test for adhesives 180° peel test for a flexible-to-rigid assembly |
BS 5214-2:1978 | Specification for testing machines for rubbers and plastics Constant rate of force application machines |
BS 1203:1979 | Specification for synthetic resin adhesives (phenolic and aminoplastic) for plywood |
BS 5350-F1:1983 | Methods of test for adhesives. Tests for flooring adhesives Performance tests for flooring adhesives |
BS 2782-3:Method 346A:1984 | Methods of testing plastics. Mechanical properties Determination of cohesion between layers of laminated tube |
BS 2782-3 Method 327A:1982 | Methods of testing plastics. Mechanical properties Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products |
BS 7379:1991 | Specification for plastics/metal laminate collapsible tubes |
BS 5350-C12:1979 | Methods of test for adhesives 180° \'T\' peel test for a flexible-to-flexible assembly |
BS 490-10.5:1984 | Conveyor and elevator belting. Testing for physical properties Method for determination of tensile strength and elongation at break of rubber covers |
BS 4443-6:1980 | Methods of test for flexible cellular materials Method 14. Preparation of water extract. Method 15. Determination of tear strength. Method 16. Determination of air flow value |
BS 7044-2.5(1990) : LATEST | ARTIFICIAL SPORTS SURFACES - METHODS OF TEST - MISCELLANEOUS |
BS 5350-G2:1987 | Methods of test for adhesives. Tests on anaerobic adhesives Determination of static shear strength of anaerobic adhesives |
BS 7399:1991 | Method for determination of delamination force of textile floor coverings |
BS 903-0:1990 | Physical testing of rubber Introduction |
BS 903-A34:1978 | Methods of testing vulcanized rubber. Determination of stress relaxation of rubber rings in compression |
BS 2782-3:Method 360C:1991 | Methods of testing plastics. Mechanical properties Determination of tear resistance of plastics film and sheeting by the initiation method |
BS 2782-3:Methods 340A and 340B:1978 | Methods of testing plastics. Mechanical properties Determination of shear strength of moulding material. Determination of shear strength of sheet material |
BS 351:1976 | Specification for rubber, balata or plastics flat transmission belting of textile construction for general use |
BS 5421-2:1978 | Methods of test for elastomeric threads Polyurethane thread (elastane yarn) |
BS 7116:1990 | Specification for double sided pressure sensitive adhesive tapes |
BS 5350-C10:1979 | Methods of test for adhesives 90° peel test for a flexible-to-rigid assembly |
BS 647:1981 | Methods for sampling and testing glues (bone, skin and fish glues) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.